04-06-2013, 01:01 PM | #1 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Anybody have DIY for a fuel pump install?
I'm installing a centri to my car and would like to see a DIY on installing a fuel pump. I was hoping that someone on here had already documented this process.
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
04-06-2013, 06:37 PM | #2 |
2010 Camaro 2 SS/RS M6
Drives: 2010 Camaro SS/RS Join Date: May 2009
Location: Clayton Delaware
Posts: 1,218
|
It's really easy especially if you have the rear cradle out already. I just followed lingenfelders instructions on their website. You don't need a siphon if you have an empty tank when u start. I also didn't need the special fuel pump locking ring tool either. Just use a brass punch.
__________________
Forged LS3, FED M311 heads, CAI Inc, ARH 1 7/8, Corsa Xtreme, Taylor Wires, MGW Shifter, Street slayer twin carbon clutch, Tick braided clutch line & speed bleeder, ZL1 Diff Swap, BMR Split drop, Sway Bars, Trailing Arms, Toe Rods, Pro bushing kit, Carslyle racing 15in conversion, Whipple, LPE dual fuel pumps, Rx catch can, Id1300x, Alky Control
|
04-08-2013, 09:51 PM | #3 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
How hard is it to drop the cradle?
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
05-23-2013, 10:41 PM | #4 |
LED god
Drives: 2010 Inferno Orange Camaro SS/RS Join Date: Oct 2010
Location: Las Vegas, NV
Posts: 537
|
I was wondering the same thing!
$500 at a shop to install, I was wondering the same thing...
__________________
|
|
|
|
|