Sirius satilite antenna dirt ring on roof.

[Caddyroger]

I went with a Kenwood Gps navigation radio. Ii required a different Sirius radio tuner then the one I had. The new antenna works better then the old one so I switched them. Now there is a ring where the antenna and wire was. Soap and water will not remove it.
What could I use to remove or make it better then it is now?

[ihaveacamaro]

clay, and then polish if that doesn't work. Do you have a machine?

[Caddyroger]

No machine . I take it in and have washed and waxed. I'll get some clay bar and try it. Woud you what would be decent bar from autozone.

[ihaveacamaro]

Originally Posted by Caddyroger

No machine . I take it in and have washed and waxed. I'll get some clay bar and try it. Woud you what would be decent bar from autozone.

I would get the meguiar's clay kit. Mothers is good too but is probably a little too non aggressive. You want something with more bite.

For the same amount of money however, you can get the nanoskin sponge set online. You can clay your car many more times and it is much better all around. I would recommend that over anything you'll buy in stores.

[ihaveacamaro]

[Caddyroger]

Originally Posted by ihaveacamaro

I would get the meguiar's clay kit. Mothers is good too but is probably a little too non aggressive. You want something with more bite.

For the same amount of money however, you can get the nanoskin sponge set online. You can clay your car many more times and it is much better all around. I would recommend that over anything you'll buy in stores.

I probably would but with heart and diabetic bad knees I do not do to much I take it in and have the work done. This is just a area 2in by 5 in I can handle that. I started radio install last Monday I am still not not but Iam waiting for a usb cable to arrive. I can finish it up in about hour.