Camaro LS Foghlights

[bcam1005]

Originally Posted by Hayden

150.00 thats for bezels,foglights, and led. Not the Halos.

i think you forgot the foglight harness... unless you already have that... or hooking it up to the side markers

[Hayden]

Originally Posted by bcam1005

i think you forgot the foglight harness... unless you already have that... or hooking it up to the side markers

LED Lights I ordered will be powered via the side markers. I believe there harness is only necessary if using Halogen or HIDs. But don't quote me on that.

[CamaroRyan]

Originally Posted by zkdreads

since your on ebay. they have fog light kits for the camaro
http://www.ebay.com/itm/2010-2011-Ch...f21c84&vxp=mtr

I ended up ordering these... hope thats all i need

[zkdreads]

Originally Posted by CamaroRyan

I ended up ordering these... hope thats all i need

its all u need. i have these lights and they are bright as hell.

[CamaroRyan]

Originally Posted by zkdreads

its all u need. i have these lights and they are bright as hell.

Was it difficult to install?

[zkdreads]

Originally Posted by CamaroRyan

Was it difficult to install?

not really. u have to figure out a way to bolt them in the fog hole. plus u need to cut out the hole in your fog light covers. my hardest thing was trying to do it without taking the front bumper off(i didnt feel like lol)

[Hayden]

Originally Posted by zkdreads

not really. u have to figure out a way to bolt them in the fog hole. plus u need to cut out the hole in your fog light covers. my hardest thing was trying to do it without taking the front bumper off(i didnt feel like lol)

From what Ive heard its not necessary to remove the whole bumper just removing the 3 liner screws? Also you cut your stock bezels? I simply ordered them online, 40$ total with shipping. I've been referring to this video for what I will be doing on the install

[CamaroRyan]

Originally Posted by zkdreads

not really. u have to figure out a way to bolt them in the fog hole. plus u need to cut out the hole in your fog light covers. my hardest thing was trying to do it without taking the front bumper off(i didnt feel like lol)

Bolting them in the fog hole, proved to be very difficult.

I ended up custom cutting the brackets it came with in order for it to fit more flush. (I know the brackets arent supposed to be used for the fog hole instal but i didnt want to do the whole pcp pipe thing they recommended. It was by no means a "plug and play". On top of all that, getting the switch wire into the car was also a huge challange. I cutom cut a peace to fit the button, and was able to string the wires under the glove box.

7 Hours of Labor with me and my Father-In-Law....... done