wiring up Viper autostart..where's BCM X1? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

zslewis · 03-11-2011, 09:37 AM

Hello, I can't seem to find the BCM X1 harness. I see that the dr door sense wire is grey/blk. But im having problems locating it. Please point me in the right direction if you can. I've been staring at the wiring info up above for hours now!

THANKS!

The Stig · 03-11-2011, 09:59 AM

There should be a sticky around here somewhere that has all of the wiring schematics for the 2010's. Owners manual might have it too.

zslewis · 03-11-2011, 10:08 AM

Thanks but the sticky is what i've been using. Took off door panel for driver window acess and dont see grey/blk wire. Saw another thread that says its on BCM X1 76 pin harness. :(

Eric Baker · 03-11-2011, 05:06 PM

That should be at the BCM, or Body Control Module, located by the gas pedal, and should have 5 plugs, X1 through X5.

IBM/2SS/RS/LS3 · 03-11-2011, 06:24 PM

Worst case call DEI tech support.

zslewis · 03-11-2011, 08:02 PM

I found it! Its grey/blk in the door, changes to orange in door. Then its in the drivers kick area. Orange 16 ga. wire.

03-11-2011, 09:37 AM	#1
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	wiring up Viper autostart..where's BCM X1? Hello, I can't seem to find the BCM X1 harness. I see that the dr door sense wire is grey/blk. But im having problems locating it. Please point me in the right direction if you can. I've been staring at the wiring info up above for hours now! THANKS! __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

03-11-2011, 09:59 AM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	There should be a sticky around here somewhere that has all of the wiring schematics for the 2010's. Owners manual might have it too. __________________

03-11-2011, 10:08 AM	#3
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	Thanks but the sticky is what i've been using. Took off door panel for driver window acess and dont see grey/blk wire. Saw another thread that says its on BCM X1 76 pin harness. :( __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

03-11-2011, 06:24 PM	#5
IBM/2SS/RS/LS3 NorCal Camaro➎ Member Drives: Bowties ONLY!! Join Date: May 2009 Location: Nor☆Cal Posts: 1,768 View My Garage	Worst case call DEI tech support. __________________

03-11-2011, 08:02 PM	#6
zslewis Drives: 2010 TT Camaro SS Join Date: Mar 2011 Location: Augusta GA Posts: 268	I found it! Its grey/blk in the door, changes to orange in door. Then its in the drivers kick area. Orange 16 ga. wire. __________________ 2010 Twin Turbo Camaro SS RWHP: TBD TQ: TBD Zach

03-11-2011, 05:06 PM	#4
Eric Baker Drives: Black/Black 2SS/RS 6M Join Date: Mar 2010 Location: Boston MA Posts: 987 View My Garage	That should be at the BCM, or Body Control Module, located by the gas pedal, and should have 5 plugs, X1 through X5.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BCM wiring	HaZe_X	5th Gen Camaro SS LS LT General Discussions	5	09-26-2019 11:28 AM
Push Start button?	CG'sSS	Camaro DIY & HOW-TO instructions & discussions	158	06-06-2012 07:27 PM
Artist rendering of 2012 Viper based on dealer meeting attendee descriptions!	Apex Motorsports	General Automotive + Other Cars Discussion	25	12-15-2010 01:05 AM
Hennessey Performance Package	EJ	Vendor and Seller review / feedback / experiences	15	06-21-2010 06:41 PM
We need help with Electronics wiring diagrams	2SSRS@Gen5diy	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	11	12-13-2009 05:58 PM