06-12-2010, 07:07 AM | #1 |
LS3,GBA,AFM,VZP,VYX,CF5
Drives: Ordered 3/1/10 Join Date: Aug 2009
Location: Fayetteville, GA
Posts: 93
|
Rubber insert to cupholder
I think the rubber insert to the front cupholder got sucked up by a vacuum while getting my car cleaned somewhere. I've searched online and found this schematic. Problem is, it's not very specific. Do you think the part I'm looking for is #19 in the drawing attached for this website?
http://www.newgmparts.com/partlocato...layCatalogid=0
__________________
Order# NVMDVG
Vin: 2G1FT1EW9A9206485 Status: In-Transit from Osh Shipped by Railroad rail number ETTX711030 Notes: None Last Update(s) March 30, 2010 - Current March 29, 2010 - (3800) Order produced March 29, 2010 - (3400) Order broadcast |
06-12-2010, 07:15 AM | #2 |
Go to auto parts store buy a roll or sheet of anti slip material and cut out your new pice.
You can even get this stuff at Wallmart; in a varity of colors. My $0.02. |
|
06-12-2010, 07:17 AM | #3 |
Drives: 2010 2ss/rs Join Date: Sep 2009
Location: Austin
Posts: 1,016
|
yeah that looks right , you could probably also make some real easy if you didnt want to buy them from the dealer, thats what these guys did.
http://www.camaro5.com/forums/showth...pholder&page=2 |
06-12-2010, 07:24 AM | #4 |
Thank you Oshawa/St.Cats!
Drives: was 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009
Location: NW NJ
Posts: 3,481
|
Its two pieces and the one isn't round - has a lip on it.
Consider emailing customerservice@gmpartsdirect.com with your VIN# (they need it regardless) and describe the part - if it has a GM part # they'll have it. I like SRFnSNO's idea and may do this while I still have the OE to make a back-up.
__________________
#3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:
|
06-12-2010, 07:28 AM | #5 |
Burnin out!
|
I know if it was a Caddy it would be liner #1 for $123.16.
Thanks for the heads up though. I'm gonna trace mine so I have the pattern. |
06-12-2010, 08:25 AM | #6 |
Drives: SSRS CGM LS3 Join Date: Apr 2010
Location: Orlando, FL
Posts: 433
|
I personally sucked mine up the first time I cleaned the inside. Was kind of traumatizing.
__________________
When you're really good in a past life, you come back as yourself. |
06-12-2010, 08:40 AM | #7 |
|
They are 10.99 each. I know, had one stick to a bottom of a soda. I just cut some foam to the size of the hole so I do not hear the bottles rattle around.
|
06-12-2010, 10:30 AM | #8 |
Boiler Up!! POTFH
|
damn mine didnt come with any
__________________
|
06-12-2010, 11:42 AM | #9 |
Drives: '10 2SS/RS, MKIII Supras Join Date: May 2010
Location: Houston/Tulsa
Posts: 1,009
|
|
06-12-2010, 11:44 AM | #10 |
|
You can get a piece of rubber mat and trim it works the same .
|
06-12-2010, 11:45 AM | #11 |
www.Camaro5store.com
|
Mine got sucked up too. Luckily, it was by my own shopvac. I popped it open and there they were. I tossed them back in. Yeah, they come out waaaay too easily.
|
06-12-2010, 11:45 AM | #12 |
Drives: Black 2SS/RS Join Date: Feb 2010
Location: Florida
Posts: 117
|
so funny, I have a small bag I keep hanging from my passanger seat in back for trash. I cleaned it out yesturday and found my rubber insert in the trash bag! It must have stuck to a cup I was throwing away. Thankfully didn't throw that sucker out!
__________________
MEET BLADE
|
06-12-2010, 12:09 PM | #13 |
Drives: 2010 Camaro Join Date: Mar 2010
Location: Northern Ontario
Posts: 1,181
|
Use a piece of thin cardboard or construction paper. Trim it to size and draw the outline on the anti-slip stuff from walmart. That's what I would do, no one will know the difference. The ones you fab up may even fit better than OEM!
__________________
1SS / RS / M6 / IOM / Black rally stripes / Polished wheels
It's a high school prom, it's a Springsteen song, it's a ride in a Chevrolet... |
06-12-2010, 12:59 PM | #14 |
|
good to know, I will be very careful when I vacuum mine
__________________
Jannetty Racing JRE Street Package
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New rear insert from Unrestricted motorsports | RJS21989 | Cosmetics and Lighting Modification Discussions | 49 | 06-12-2010 02:32 PM |
Picked out the rims need help with rubber. | Asylum | Wheels and Tires Talk Sponsored by The Tire Rack | 9 | 11-28-2009 12:18 AM |
Black rubber strip on bottom bumper coming off. | jbgz28 | 5th Gen Camaro SS LS LT General Discussions | 1 | 09-09-2009 09:31 PM |