Gunther's Gift 2011 Victory Red 2SS RS

[Gunthervk]

Purchased 4/5/12
K&N CAI Installed 4/21/12
SuperChips programmed 91 Octane Performance 4/22/12
FlowMaster American Thunder Catback Exhaust system installed 4/24/12
Apex Motorsports Cold Air Intake Scoop installed 5/22/12
Apex Washer Fluid Tank Relocate Kit installed 5/22/12
Jannetty Racing Custom Tune installed 5/31/12
SLP front and rear adjustable sway bars 7/8/12
Technostalgia LED Tail lights 7/13/12
AAC LED Reverse Lights 7/13/12

[Gunthervk]

1 x Apex Motorsports Cold Air Intake Scoop 051411

1 x Apex Motorsports Washer Fluid Tank Replacement Kit 070823AE
Options: Pump: ADD GM Pump 92214706

ordered 5/16
delivery expected 5/22
Installed 5/22

[MoeIv]

[Gunthervk]

Originally Posted by MoeIv

Your right, I'll work on taking some pictures this weekend.

[Gunthervk]

Jannetty Custom Tune Ordered 5/17/12
2010-2012 Camaro SCT X3 Power Flash GM

2011 Chevrolet Camaro Technostalgia Tail Light ordered 5/18/22
Technostalgia Tail Light
for 2011 Chevrolet Camaro SS 8 Cyl 6.2L

TECHNOSTALGIA LED TAIL LIGHTS, SQUARE, PLASTIC, RED LENS, SET OF 4 -- Bulbs included; 44 LED bulbs per lamp; Includes wiring harness, mounting hardware, and installation instruction; Made of acrylic lens that minimize the LED visibility and contoured fit to fender; Features AfterBurner tail light mode and long life operation; Controls stop, tail, turn signal, and RapidFire function; May require drilling for easy installation.

[Gunthervk]

The Jannetty Racing Custom Tune installed 5/31/12. Ted is super helpful and answers emails amazingly fast!!

I ordered the 2011 Chevrolet Camaro Technostalgia Tail Light from Car Parts Wholesale, do *NOT* ever order anything from them again!

I received 2 tail light assemblies. After 3 days, they told me that's what I get, when the part that I ordered clearly said 4! I have returned them and am awaiting my $407.00 credit.

Live and Learn...

[Gunthervk]

[Gunthervk]

I installed SLP front and rear sway bars on 7/7/12 - 7/8/12.

The rear went on easily, the front needed a slight bit of "persuasion".

I still have lower control arms, adjustable toe links, chassis and strut tower braces from Lakeside that need installing.

I also have SLP 1" lowering springs and to be installed.

I also have a AR Performance carbon fiber splitter that will be last to be installed.

[Gunthervk]

I finally got the Technostolgia Tail Lights delivered so I decided last night it was time to pull the bumper and add them and the LED back up lights I had waiting to be installed.

The bumper came off very easily and the reverse lights went in effortlessly.

The Technostalgia lights were a bit more difficult but they went in smoothly and worked properly first time! I haven't done anything with the "show" line yet, I have it safely tucked away in the trunk.

I'm going to start the lowering spring install tomorrow morning. I have all the necessary tools except a 21 MM wrench and the spring compressor. I'll get them this afternoon and start right after my weekly visit with mom and dad.

I have Monday and Tuesday off to give me time to finish and get a good alignment before I have to make the long commute.

The lights look great!

[pierre777]

Sounds great but where are your pics?

[VR Baron]

Nice ride. Great color choice obviously !

[Gunthervk]

Thanks, I wasn't real sure about VR, but it has grown on me!

Here is a picture of the next parts to be installed: