GM Hi Tech Performance Article - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CFPC_2010 · 07-27-2009, 07:08 AM

In the Sept issue of the magazine (pg 34) is an article on some initial drag runs I did (over 20 runs) for the magazine to get some real 1/4 mile times (videos are on their website -- no numbers shown so as not to be a spoiler). They also had a manual car run up in NJ at the same time. These runs were done with just under 500 miles on the car and I was just learning how to drive this car on the track so I was happy with the results. I hope to get some of the performance upgrades on the car into the magazine as well (they already captured details of a full day of dyno tuning on the car).

I would like to thank Scott Parker and Justin Cesler for the opportunity and as you will see from the article Justin captured some awesome photos of the car.

http://www.gmhightechperformance.com...ing/index.html

Terry

S8ER01Z · 07-27-2009, 08:12 AM

Any Evan Smith passes? J/K I am sure you did just fine. Thanks for the heads up!!!

SomeGeoffGuy · 07-27-2009, 11:01 AM

I just read that. There were pretty horribly conditions too. Did you guys get temp, humidity, and barometer to do an SAE correction?

-Geoff

SGOS252382 · 07-27-2009, 11:23 AM

Nice, I talked to Jeremy about your car. He tuned your car, right? He tuned mine on Saturday.
Is your car going to be in the next issue?

CFPC_2010 · 07-27-2009, 11:29 AM

Quote:

Originally Posted by SomeGeoffGuy

I just read that. There were pretty horribly conditions too. Did you guys get temp, humidity, and barometer to do an SAE correction?

-Geoff

Geoff - I did get the data for correction which corrected right to GM's published numbers of 13.2 @ 107 .

CFPC_2010 · 07-27-2009, 11:42 AM

Quote:

Originally Posted by SGOS252382

Nice, I talked to Jeremy about your car. He tuned your car, right? He tuned mine on Saturday.
Is your car going to be in the next issue?

Yep Jeremy spent an entire day working with the car to get familiar with the beta HP tuners software and the car itself. I was very happy with the results, especially on the transmission tuning. They shot that for the magazine as well and would expect it to show up in a later article. The car is in the issue just coming out this week and they did a great job of capturing the IOM in the sun.

Terry

SGOS252382 · 07-27-2009, 11:48 AM

Quote:

Originally Posted by CFPC_2010

Yep Jeremy spent an entire day working with the car to get familiar with the beta HP tuners software and the car itself. I was very happy with the results, especially on the transmission tuning. They shot that for the magazine as well and would expect it to show up in a later article. The car is in the issue just coming out this week and they did a great job of capturing the IOM in the sun.

Terry

Yeah, I've got a subscription to GM High Tech Mag. I really liked the article and your car ran great for summer in S.W. Florida.
And Jeremy is extremely knowledgeable and really knows his stuff.

Can't wait to see your car in upcoming issues. Your car looks great (a lot like mine if I might say so myself)

07-27-2009, 07:08 AM	#1
CFPC_2010 VIN #3026 IOM/IO Drives: 2010 IOM Camaro Join Date: Sep 2008 Location: Oviedo,FL Posts: 101 View My Garage	GM Hi Tech Performance Article In the Sept issue of the magazine (pg 34) is an article on some initial drag runs I did (over 20 runs) for the magazine to get some real 1/4 mile times (videos are on their website -- no numbers shown so as not to be a spoiler). They also had a manual car run up in NJ at the same time. These runs were done with just under 500 miles on the car and I was just learning how to drive this car on the track so I was happy with the results. I hope to get some of the performance upgrades on the car into the magazine as well (they already captured details of a full day of dyno tuning on the car). I would like to thank Scott Parker and Justin Cesler for the opportunity and as you will see from the article Justin captured some awesome photos of the car. http://www.gmhightechperformance.com...ing/index.html Terry __________________ www.cfpowdercoating.com Last edited by CFPC_2010; 08-10-2009 at 09:01 AM. Reason: Added Link

07-27-2009, 11:01 AM	#3
SomeGeoffGuy Drives: 2023 2SS Convertible Join Date: May 2009 Location: Metro Detroit Posts: 1,054	I just read that. There were pretty horribly conditions too. Did you guys get temp, humidity, and barometer to do an SAE correction? -Geoff __________________ '12 2SS RS Convertible - Traded in. '16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hawk Performance Brake Pad "Updated"	KILLER74Z28	Suspension / Brakes / Chassis	34	05-04-2016 11:11 AM
GM High Tech Performance Mag reviews 2010 Camaro	dreammy	5th Gen Camaro SS LS LT General Discussions	1	06-28-2009 10:58 AM
Another "GM Killing Off Performance Cars" Article	Sloppy Joe	General Automotive + Other Cars Discussion	14	05-29-2009 03:20 PM
GM High Tech Performance magazine is looking for YOU!	JustinCesler	5th Gen Camaro SS LS LT General Discussions	15	04-27-2009 10:53 PM
GM High Tech Performance magazine is looking for YOU!	JustinCesler	USA - Southeast	2	04-27-2009 01:31 PM

07-27-2009, 08:12 AM	#2
S8ER01Z Drives: Camaro Z28 Join Date: Jul 2009 Location: NC Posts: 447	Any Evan Smith passes? J/K I am sure you did just fine. Thanks for the heads up!!!

07-27-2009, 11:23 AM	#4
SGOS252382 Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008 Location: S.W. Florida Posts: 6,294	Nice, I talked to Jeremy about your car. He tuned your car, right? He tuned mine on Saturday. Is your car going to be in the next issue?