07-30-2009, 02:23 PM | #1 |
Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009
Location: Orange CA
Posts: 607
|
I WANT TO INSTALL A MILD CAM SHAFT, ANY REFRRALS???
I have the LS3, m6 looking to get a cam shaft installed ASAP. Anyone done it yet or know anyone that has done one in the So Cal area? Prices?
__________________
Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423
My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc |
07-30-2009, 02:24 PM | #2 |
Drives: Future Owner Join Date: Jul 2007
Location: Pensacola, Florida
Posts: 233
|
Can you be more specific?
a cam shaft? a video camera? |
07-30-2009, 02:26 PM | #3 |
Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009
Location: Orange CA
Posts: 607
|
Just a basic cam shaft, nothing major just to push out a little hore HP and of course give me that SOUND
__________________
Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423
My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc |
07-30-2009, 02:27 PM | #4 |
Yep I'm back!
Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009
Location: Indian Trail, NC
Posts: 2,565
|
Hopefully a mod will move this but you would have better luck in your regional forum or the V8 forum finding some help. I too am researching cams there are some posts now with info an ADM has two advertised cams stage one and stage two. They have responded quickly to my questions. http://www.admperformance.com/index....id=5&Itemid=38 I would suggest the stage one for what you asked for.
|
07-30-2009, 02:35 PM | #5 | |
Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009
Location: Orange CA
Posts: 607
|
Quote:
__________________
Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423
My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc |
|
07-30-2009, 02:38 PM | #6 | |
Yep I'm back!
Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009
Location: Indian Trail, NC
Posts: 2,565
|
Quote:
|
|
07-30-2009, 02:42 PM | #7 |
Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009
Location: Orange CA
Posts: 607
|
Oh S**t never thought of that. I wouldn't want it to void my warranty. Do you think chevy would install and warranty it or no? Would something like that mess with it passing smog?
__________________
Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423
My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc |
07-30-2009, 02:46 PM | #8 |
Yep I'm back!
Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009
Location: Indian Trail, NC
Posts: 2,565
|
I don't know much about smog stuff just CA is crazy with rules and regs. As far as dealer and cams gotta find right one and ask quesitons. If they had a GMPP cam it would be what your looing for, mild upgrade and it would be gmpp approved, but they don't offer one right now. I've even read a gmpp cam would affect warranty, I am no expert and I don't want this to fill up with a warranty fight. i would go to your dealer or find a dealer and ask them about warrantys and cams and see what they say. Ask around other people you know have sports cars or tuned cars and see if they reccomend anyone.
|
07-30-2009, 02:49 PM | #9 |
Drives: 00 SS / 10 2SS RS RJT Join Date: Apr 2009
Location: DFW, TX
Posts: 128
|
find a good corvette performance shop in your area...they will be able to help you...
see what is popular among the corvette guys...they have a 3 year head start |
07-30-2009, 02:51 PM | #10 | |
Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009
Location: Orange CA
Posts: 607
|
Quote:
__________________
Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423
My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc |
|
07-30-2009, 02:55 PM | #11 |
Drives: 2010 2SS RS Join Date: Jul 2009
Location: Tracy/San Diego CA
Posts: 224
|
JBA in San Diego will do it. Expect HEAVY labor charges if you are not going to do it yourself. Sure the cam may cost $400, but the install will be $1500+.
You will also need a tune to get any power out of it, otherwise the car will most likely just run funny. They do not have the flash software now, but if you have your own, like HP Tuners, they will tune it on their dyno. This kind of work will definitely "void" the warranty. Any engine/powertrain problems will likely be on you. That being said, I cant wait to get down there and do it. (3 weeks :( )
__________________
IOM w/ White Stripes 2SS RS M6 #17772
Now - Stainless Works 2" Headers, Intake, Cam, tune, ect And shepherds we shall be, For thee my lord for thee. Power has descended forth from thy hand, that our feet may swiftly carry out thy commands. So we shall flow a river forth to thee, and teeming with souls shall it ever be.In nomine Patri, Et Fili, Spiritus Sancti |
07-30-2009, 04:11 PM | #12 |
Drives: 1998 GMC C1500 Ext. Cab 4.3L Join Date: Jun 2009
Location: San Diego
Posts: 45
|
I second JBA, they are very cool over there. They work on anything from desert trucks to dragsters.
There is also a place in Mira Mesa (If you are familiar with the San Diego area) but the name slips my mind. |
07-30-2009, 04:15 PM | #13 |
Drives: 2010 2SS RS Join Date: Jul 2009
Location: Tracy/San Diego CA
Posts: 224
|
I talked to Shaun over at JBA today and they seemed to be on top of things with this car. Apparently they have one for the shop. They already made their own CAI and have headers coming out next month. He said their car is under the knife getting a supercharger. I havent been their yet as I wont be in san diego for a couple weeks but they sound knowledgeable and are right down the street from my house.
__________________
IOM w/ White Stripes 2SS RS M6 #17772
Now - Stainless Works 2" Headers, Intake, Cam, tune, ect And shepherds we shall be, For thee my lord for thee. Power has descended forth from thy hand, that our feet may swiftly carry out thy commands. So we shall flow a river forth to thee, and teeming with souls shall it ever be.In nomine Patri, Et Fili, Spiritus Sancti |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LS3 CAM AND HEADERS DYNO | ADM PERFORMANCE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 53 | 02-13-2016 06:15 PM |
Cam basics | CamaroSpike23 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 76 | 11-25-2015 11:42 AM |
My JL 12" and JL 250 amp install VIDEO AND PIX! | TAG UR IT | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 55 | 02-12-2011 01:03 AM |
Cam Vs. Cam Vs. Cam | My First Camaro! | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 12 | 12-11-2010 01:54 AM |
ADM Stage 1 CAM - No tune required | ADM PERFORMANCE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 61 | 06-09-2010 06:00 PM |