01-25-2013, 01:32 PM | #15 |
Drives: 2008Corvette Join Date: Feb 2012
Location: Ga
Posts: 691
|
Afternoon Staintrain,
HPS is more than capable and would love the oppurtunuty to provide you with your goals. 95% of our work is Forced Induction! There is a reason our Single and Twin Turbo kits produce more "USABLE" HP and Tq and we make more HP and TQ overall than the competition per pound of boost! FI is what we do! Here is what you can expect from us with our turbo kits: For 2013 and from now on,all of our turbo kits are built with Stainless Steel piping for the hotside for either the single or twin kits. All the coldside pipeing is built with aluminum piping. All welding is tig welded in house by our chassis,fab builders. All hotside piping is ceramic coated and the charge piping going to the TB is Powdercoated to your choice of color. We have also switch to only using Precision Race Turbo's. Since the switch to precision turbo's, coupled with our turbo kit design we have been able to produce higher HP and TQ #'s at the same boost levels. For the wastegates, depending on space available, we use either Turbonetics Wastegates or Turbosmart. The A/A intercooler we use flows enough air to support 1000hp. And best of all, since you have a 2012 V6(LFX) we have the ability to do the tuning in house after your turbo kit is completed. With all these upgrades our pricing will not be as cheap as the competitor, however the quality and longevity will last as long as you own your vehicle! Feel free to call me Chris @ 678-551-8422 at your earliest convience or stop by and take a look at our fabwork we do and the racecars we are building in house, and we can talk further about your goals and your plans. Talk to you soon! Here is pic of a few parts we are using on a customers twin turbo 2012 LFX we are completing. |
01-25-2013, 03:30 PM | #16 |
Drives: Camaro, CTS-V, Escalade, GMC Sierra Join Date: Nov 2011
Location: Scottsdale, AZ
Posts: 577
|
The IPF Sc Kit is 100% bolt-on and 100% reversible, it's a low impact OEM design and installs in 6-8 hours. It's reliable HP, less maintenance, self contained so no need to run oil lines and you will see 414 RWHP on a total stock 2012 LFX. See our build in the January issue of GM High Tech starting on page 64. There is a 6 page build with Pre and Post install dyno. Happy hunting!
Thanks, Jesse! |
01-25-2013, 03:53 PM | #17 | |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
Quote:
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
|
01-25-2013, 04:23 PM | #18 | |
Drives: 2008Corvette Join Date: Feb 2012
Location: Ga
Posts: 691
|
Quote:
You have a nice car, however you obviosly havnt driven a turbo car .. Chris |
|
01-25-2013, 04:28 PM | #19 | |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
Quote:
HAHA, I have, just not this build. I have been in Redlines Twin Turbo V8 Car several times, it moves...... at close to 900 hp it should. I am working witgh a manufacturer for a twin disc high performance clutch, should be ready fairly soon.
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
|
01-25-2013, 04:30 PM | #20 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
Chris, will you be at the Pony Wars in Valdosta on the 9th, I will be there..
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
01-25-2013, 04:33 PM | #21 | |
Drives: 2008Corvette Join Date: Feb 2012
Location: Ga
Posts: 691
|
Quote:
Yes sir, Me and a few other will be there. |
|
01-27-2013, 07:50 PM | #22 | |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
Quote:
So we became vendors for the IPF kits |
|
01-27-2013, 08:47 PM | #23 |
|
I like those suspension parts, more eye candy
|
|
|
|
|