11-20-2015, 10:06 PM | #1 |
Drives: '13 2SS 1LE Join Date: Aug 2014
Location: B.C. Canada
Posts: 11
|
D1SC Procharger on LSX block
Have a '13 1LE and over the winter will be building a 416 stroker using an LSX block. Just wanted to make sure that the procharger kit I have now will mount up the exact same. Thank you.
|
11-21-2015, 05:52 AM | #2 |
Svt lol
Drives: 2011 ss inferno orange blown Join Date: Jan 2012
Location: Topeka
Posts: 2,312
|
Should, every mounting point is universal on the Ls engines except that disaster idea of a ls4 (fwd) they put in the Monte Carlo if I remember correctly.
__________________
plasti dip is not a mod.......and a cold air intake doesn't make you fast!
|
11-21-2015, 10:56 AM | #3 |
Drives: 2015 Camaro SS commemorative Join Date: May 2015
Location: Utah
Posts: 425
|
Do a build log. I would be interested to see this. What HP have you hit so far with your setup?
|
11-21-2015, 11:05 AM | #4 |
Sittin side ways
Drives: 2010 2SS/RS IOM Join Date: Nov 2012
Location: Arlington,Tx
Posts: 232
|
Upgrade to a F series head unit. That D1 will run out of steam.
__________________
850+hp club member
Procharger F1-A |
11-21-2015, 11:26 AM | #5 |
ЯєŧąяĐ Єl¡m¡иąŧøя ™
|
It will mount fine. I wouldn't use a D1 for a 416 though. A F series is more appropriate.
__________________
|
11-21-2015, 01:47 PM | #6 |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
I had a D1 on my LSX427. The most i could get out of it was 758whp at 14psi. I had one more pulley to go but didnt bother since twins were in the works. Id go F1C to get the most out of your motor.
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
|
|
|
|