Got a set of 1000hp axles coming from Hendix (DSS) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Turbo99 · 03-20-2012, 03:23 PM

I ordered a set of the new 1000hp axles today from Hendrix Engineering. These are the new "street" axles DSS has been working on and Hendrix has a great price on them so i jumped on it. Should be seeing them in a week or so and I'll get some feed back up once they are installed.

Thanks DSS and Hendrix for working on a street friendly axle that is for the higher HP cars and at an affordable price.

Cpanthers85 · 03-20-2012, 05:08 PM

I don't see them on their website?! 600 is too small and 1400 is going to be overkill... sounds ideal for me too!!

Driveshaftshop · 03-20-2012, 05:30 PM

ill post them up tomorrow when i get a chance

scott&keyla · 03-20-2012, 06:43 PM

i got my set installed this past monday!!! these axles are great!! DSS came thru on these. had 1400hp axles and went to the new 1000hp axles and man these things ride and feel smooth. I would highly recommend these if your car is lowered and is your DD. thanks frank and the guys at DSS. See you guys at Camaro's for Hero's in June.

jeremywilson18 · 03-20-2012, 09:25 PM

I'm almost to the point where I need to look at this stuff, just need to get my current shop bill paid up first

gnturboray · 03-20-2012, 10:44 PM

How much?!!

SUX2BU · 03-21-2012, 01:39 AM

Quote:

Originally Posted by scott&keyla

i got my set installed this past monday!!! these axles are great!! DSS came thru on these. had 1400hp axles and went to the new 1000hp axles and man these things ride and feel smooth. I would highly recommend these if your car is lowered and is your DD. thanks frank and the guys at DSS. See you guys at Camaro's for Hero's in June.

So you can daily drive these? I was looking at getting the DSS 9" kit, but they said you can't daily drive it.

McBeevee · 03-21-2012, 04:16 AM

Quote:

Originally Posted by SUX2BU

I was looking at getting the DSS 9" kit, but they said you can't daily drive it.

Where did you see this?

Driveshaftshop · 03-21-2012, 05:31 AM

Quote:

Originally Posted by SUX2BU

So you can daily drive these? I was looking at getting the DSS 9" kit, but they said you can't daily drive it.

this is not true

The 9" kit uses a different axle, I believe you may have miss-understood the info posted on the other Title. The axles can be daliy driven and were working to make them even better than they were ?
i sent you a PM.

Squintz Palladoris · 03-21-2012, 05:53 AM

Quote:

Originally Posted by SUX2BU

So you can daily drive these? I was looking at getting the DSS 9" kit, but they said you can't daily drive it.

I have 15k miles on my DSS 9" in my Daily Driver.

McBeevee · 03-21-2012, 07:05 AM

Quote:

Originally Posted by Driveshaftshop

this is not true

The 9" kit uses a different axle, I believe you may have miss-understood the info posted on the other Title. The axles can be daliy driven and were working to make them even better than they were ?
i sent you a PM.

Whew, that's good to know. I was getting a little nervous about my decision to upgrade. I don't drive mine every day, but I try to get it out whenever the weather is nice (3-4 times a week).
Frank, since others with lowered cars like mine have had issues with the CV's wearing.....is this something I should inspect after a certain amount of mileage? If you find a solution to the CV angle and release a new version, will I be able to make the switch with my setup?

bhall82 · 03-21-2012, 08:07 AM

Quote:

Originally Posted by scott&keyla

man these things ride and feel smooth. I would highly recommend these if your car is lowered and is your DD.

+1

Merc · 03-21-2012, 08:26 AM

Quote:

Originally Posted by SUX2BU

So you can daily drive these? I was looking at getting the DSS 9" kit, but they said you can't daily drive it.

Although Pumpkin is stored away right now, I daily drive the DSS 1400 HP axels. No issues yet and Pumpkin is 1.5" lower.

Hendrix-Engineering · 03-21-2012, 09:22 AM

THANKS!!! We will be glad to help out any one with there set up and get them what they need wether its the 9 inch or axles and drive shaft...I am a little over 25,000 miles on my 9 inch set up,my car is about 2-2 1/4 lowered and weve tested a few different combos ,we constantly push the envolope .If anyone has any questions call any time,i sold a rear conversion to a guy in canada at 1am the other day lol..

03-20-2012, 03:23 PM	#1
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	Got a set of 1000hp axles coming from Hendix (DSS) I ordered a set of the new 1000hp axles today from Hendrix Engineering. These are the new "street" axles DSS has been working on and Hendrix has a great price on them so i jumped on it. Should be seeing them in a week or so and I'll get some feed back up once they are installed. Thanks DSS and Hendrix for working on a street friendly axle that is for the higher HP cars and at an affordable price. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

03-20-2012, 05:08 PM	#2
Cpanthers85 Drives: 2011 Camaro 2SS RS Join Date: Jul 2011 Location: Pittsburgh, PA Posts: 470 View My Garage	I don't see them on their website?! 600 is too small and 1400 is going to be overkill... sounds ideal for me too!! __________________ 2011 2SS/RS L99 2017 Chevy SS 1979 Z28 Mods: Kooks Long Tube Headers, RotoFaB EForce CAI, American Thunder Catback Exhaust, PFADT Stage 1 Drag Kit + Front Sway Bar, GM Strut Tower Bar. ZL1 Fuel Pump. Nitto NT05R. RX Catch Can.LS9 Cam and Springs.LS3 Conversion.JRE Fuel Rail Upgrade.Edelbrock Eforce.60# Eforce Injectors.Extreme Racing Tune. 523/495 MY BUILD THREAD

03-20-2012, 06:43 PM	#4
scott&keyla Drives: 2010 ss(scott) 2011 rs(keyla) Join Date: Dec 2010 Location: Hope Mills, North Cack Posts: 73 View My Garage	i got my set installed this past monday!!! these axles are great!! DSS came thru on these. had 1400hp axles and went to the new 1000hp axles and man these things ride and feel smooth. I would highly recommend these if your car is lowered and is your DD. thanks frank and the guys at DSS. See you guys at Camaro's for Hero's in June. __________________ Don't be scerd!! Run it!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who would be interested in a set of axles stronger than the stock Diff for less	Driveshaftshop	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	137	09-02-2012 04:01 PM
Our first DSS 9 Inch Conversion and Detailed review.	55Designs	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	2	04-15-2011 09:24 AM
New line of axles coming out from Gforce	GFORCE1320	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	8	11-26-2010 09:13 AM
Hot Deal For DSS 2010 Camaro Axles	Paschal Performance	Transmission / Driveline	3	03-04-2010 08:36 PM
Gforce Engineering axles and driveshafts coming soon	GFORCE1320	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	13	02-13-2010 11:29 AM

03-20-2012, 05:30 PM	#3
Driveshaftshop Drives: own more cars than i can list Join Date: Nov 2010 Location: Charlotte NC Posts: 1,124	ill post them up tomorrow when i get a chance

03-20-2012, 09:25 PM	#5
jeremywilson18 Drives: 2011 Inferno Orange 2SS RS(LSX 454) Join Date: Dec 2011 Location: Canada Posts: 248	I'm almost to the point where I need to look at this stuff, just need to get my current shop bill paid up first

03-20-2012, 10:44 PM	#6
gnturboray Drives: SIM 2010 2SS/RS LS3 LPE750 Join Date: Feb 2012 Location: Mckinney, Texas Posts: 764	How much?!!

03-21-2012, 09:22 AM	#14
Hendrix-Engineering Account Suspended Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009 Location: nc Posts: 1,835	THANKS!!! We will be glad to help out any one with there set up and get them what they need wether its the 9 inch or axles and drive shaft...I am a little over 25,000 miles on my 9 inch set up,my car is about 2-2 1/4 lowered and weve tested a few different combos ,we constantly push the envolope .If anyone has any questions call any time,i sold a rear conversion to a guy in canada at 1am the other day lol..