Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 11-30-2009, 11:43 AM   #1
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
Another L99 over 500RWHP with no cam or heads!

We just finished up Jason's 2010 l99 auto car with out 600hp stage one kit.
Also he is getting some Pedders XA's and we installed a set of PFADT sway bars.

we will be making his vid in the next week or two, but till then here is a few pics and a dyno graph. the base line pull was 333.60HP 355.18TQ.

after the ETMC 600HP kit it did 516.09HP and 505.21 THATS 625+ at the crank without a CAM or heads!!!!!!!!!!!!!! He also wanted a really safe tune so if you look close you will see the FLAT AFR line is at 11.6 where we normally would run HIGH 11's to 12 AFR and could get a few more out of her easy!

Kit includes
*ARH headers with High flow cats
*TVS 2300 wtih 8 psi
*new tr6 spark plugs
*ETMC tune
*ETMC ported TB
*Roto Fab CAI
*Magnaflow Axleback Exhaust

THE CAR






THE GOODIES














Last edited by east TX Muscle cars; 12-01-2009 at 09:42 AM.
east TX Muscle cars is offline   Reply With Quote
Old 11-30-2009, 11:44 AM   #2
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845


east TX Muscle cars is offline   Reply With Quote
Old 11-30-2009, 11:50 AM   #3
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
east TX Muscle cars is offline   Reply With Quote
Old 11-30-2009, 12:10 PM   #4
jsharp
NOW CAMMED & SUPERCHARGED
 
jsharp's Avatar
 
Drives: 2010 Camaro 2SS/RS Black w/ IOM
Join Date: Oct 2008
Location: Ar
Posts: 2,336
what is the pricing for this setup? Do you offer ship to/from?
jsharp is offline   Reply With Quote
Old 11-30-2009, 12:14 PM   #5
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 111,187
my Camaro needs this
2010 SSRS is offline   Reply With Quote
Old 11-30-2009, 12:37 PM   #6
NHSS
 
NHSS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2009
Location: Southern NH
Posts: 76
What are the SAE numbers?
NHSS is offline   Reply With Quote
Old 11-30-2009, 01:52 PM   #7
chappy48

 
chappy48's Avatar
 
Drives: 2010 Camaro Auto 2SS/RS
Join Date: Oct 2008
Location: Wauconda, IL
Posts: 878
I've got almost this exact setup being put on my car this week. Can't wait!!
chappy48 is offline   Reply With Quote
Old 11-30-2009, 02:36 PM   #8
navyblueSS
 
Drives: 2002 Camaro SS
Join Date: Jul 2009
Location: Quitman, LA
Posts: 609
Nice!!
__________________
2015 1LE - CAI intake, TSP longtubes,
NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms
navyblueSS is offline   Reply With Quote
Old 11-30-2009, 05:52 PM   #9
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
SAE is 325 hp and 346 TQ BEFORE
AND---504HP and 492 TQ after

As you can tell same gains even in that correction factor.
east TX Muscle cars is offline   Reply With Quote
Old 11-30-2009, 11:03 PM   #10
sav1
 
sav1's Avatar
 
Drives: 2009 Corvette Z06
Join Date: Jun 2009
Location: San Diego
Posts: 556
Looks great! Are the sway bars going to help with wheel hop? also, what are you going to do with the stock engine cover? I've seen some where they've been cut and mounted somehow.
sav1 is offline   Reply With Quote
Old 12-01-2009, 09:32 AM   #11
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
we have not yet tried to make one fit. The pass side would be easy to make fit, now the pass side would be a little work. As for the cover the customer took it with him.
east TX Muscle cars is offline   Reply With Quote
Old 12-01-2009, 06:43 PM   #12
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
Quote:
Originally Posted by jsharp View Post
what is the pricing for this setup? Do you offer ship to/from?
we can pick up and drop off with in a certain distance. you dont seem to be to far so we could work out something
east TX Muscle cars is offline   Reply With Quote
Old 12-02-2009, 02:00 PM   #13
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
Someone with a 6 speed MAN give us a buzz that wants to do this so we can get some really good BLOWER only numbers out there! This is through an AUTO and is already well over 500 RWHP WITHOUT A CAM OR ANYTHING ELSE BUT HEADERS!

Last edited by east TX Muscle cars; 12-03-2009 at 10:11 AM.
east TX Muscle cars is offline   Reply With Quote
Old 01-19-2010, 02:12 PM   #14
east TX Muscle cars
 
east TX Muscle cars's Avatar
 
Drives: 2x 05 Vettes/65'AC cobra/68 camaro
Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
I forgot to load up the Dyno Vid for this one.........

here is the link to the Dyno Vid of this car

east TX Muscle cars is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List Merc Dragstrip and Launch Techniques Discussion 3652 08-17-2023 02:50 PM
Cam basics CamaroSpike23 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 76 11-25-2015 11:42 AM
Unofficial 1/4 Mile (V8) 2010+ Camaro Fast List Merc Dragstrip and Launch Techniques Discussion 250 04-01-2014 10:40 AM
L99 TVS 1900 + Cam Dyno #'s ARE IN pharmd Forced Induction - V8 35 09-07-2009 04:36 AM
L99 engine specifications Tran Wiki 0 10-19-2008 11:40 AM


All times are GMT -5. The time now is 12:24 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.