Curt's 1969 Camaro Project - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

audrey_m · 12-23-2010, 02:44 PM

Unfortunately with the bad weather comes the bad drivers and accidents. You'll probably be busy for a while!

cjingle · 01-04-2011, 07:06 PM

Some progress on the car. Here are pictures.

Ocikat · 01-04-2011, 09:40 PM

progress is a good thing, Springtime is on the way

2010 BADSS · 01-05-2011, 01:40 PM

Nice Curt, looks like that roof was always on her!

cjingle · 01-22-2011, 09:14 AM

Here are some more pictures of the body work. Car Crafters slowed down enough so my 69 can get some attention.

Next up, the front clip. Then off to paint!

2010 BADSS · 01-22-2011, 09:25 AM

AWESOME!!!!!

andredmg · 01-22-2011, 07:25 PM

Stay on top of em and crack the whip lol its lookin good!

Ivan @ Southwest Speed · 01-22-2011, 08:25 PM

Diggin the hell out of the front downtubes and cage.

That's NASCAR like a Boss!
Ivan

vincewalthers · 01-23-2011, 07:35 PM

Man now I'm kind of motivated to start working on the 78 lol. It's sittin in the front yard looking about the same, no front fenders, interior gutted.. Ah someday. Can't wait to see it when it's done Curt!

cjingle · 01-24-2011, 06:46 PM

Here are some pictures where the 69 is getting prep'ed for paint. This is round one as the front clip hasn't been touched yet. The doors and trunk lid are almost ready.

Ocikat · 01-24-2011, 10:26 PM

oooooooooooooooohhhhhhhhh PAINT !!! This is a milestone

This is gonna be nice Curt !!

2010 BADSS · 01-25-2011, 11:35 AM

YIIIIIIIPPEEEEEE! Can't wait!

cjingle · 01-26-2011, 06:20 PM

More pictures (in primer).

The plan (as far as I know) will be this will happen two more times. Sand, prime, sand, prime.

Then, the front clip, doors, trunk lid, and hood all go through the same thing.

Then, it all gets put together. Final sand, prime, then paint. Jim wants to make sure the color is consistent as it is very close to a candy color.

Ivan @ Southwest Speed · 01-26-2011, 09:03 PM

Looking really good Curt. I like what I see.
Ivan

01-04-2011, 07:06 PM	#128
cjingle Drives: 1969 Camaro RS, 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Albuquerque, New Mexico Posts: 587	Progress Yay! Some progress on the car. Here are pictures. Attached Images __________________ Enjoy! Curt

01-04-2011, 09:40 PM	#129
Ocikat Drives: 2012 2LT 45th convertible Join Date: Jul 2010 Location: Albuquerque Posts: 949	progress is a good thing, Springtime is on the way __________________ Top Ten Reasons I Procrastinate 1.

01-05-2011, 01:40 PM	#130
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	Nice Curt, looks like that roof was always on her! __________________ LPE 650 BHP package Dual disc clutch set Borla catback exhaust-S type DSS 9" rear with 3.90 gear Pfadt suspension/Hotchkiss chassis brace Forgeline Wheels VR3S/Nitto tires Beware of the LPE Sisterhood

01-22-2011, 09:14 AM	#131
cjingle Drives: 1969 Camaro RS, 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Albuquerque, New Mexico Posts: 587	Work Continues... Here are some more pictures of the body work. Car Crafters slowed down enough so my 69 can get some attention. Next up, the front clip. Then off to paint! Attached Images __________________ Enjoy! Curt

01-22-2011, 09:25 AM	#132
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	AWESOME!!!!! __________________ LPE 650 BHP package Dual disc clutch set Borla catback exhaust-S type DSS 9" rear with 3.90 gear Pfadt suspension/Hotchkiss chassis brace Forgeline Wheels VR3S/Nitto tires Beware of the LPE Sisterhood

12-23-2010, 02:44 PM	#127
audrey_m Drives: 2010 2SS/RS Join Date: Aug 2010 Location: Albuquerque, NM Posts: 383	Unfortunately with the bad weather comes the bad drivers and accidents. You'll probably be busy for a while!

01-22-2011, 07:25 PM	#133
andredmg Big Nasty Drives: Chevys lots of em Join Date: Jun 2010 Location: Albuquerque NM Posts: 930	Stay on top of em and crack the whip lol its lookin good!

01-22-2011, 08:25 PM	#134
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Diggin the hell out of the front downtubes and cage. That's NASCAR like a Boss! Ivan

01-23-2011, 07:35 PM	#135
vincewalthers Drives: 2010 SS Camaro Aqua Blue Metallic Join Date: Jan 2010 Location: Las Cruces, NM Posts: 480 View My Garage	Man now I'm kind of motivated to start working on the 78 lol. It's sittin in the front yard looking about the same, no front fenders, interior gutted.. Ah someday. Can't wait to see it when it's done Curt!

01-24-2011, 06:46 PM	#136
cjingle Drives: 1969 Camaro RS, 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Albuquerque, New Mexico Posts: 587	In the Paint Shop (Round 1) Here are some pictures where the 69 is getting prep'ed for paint. This is round one as the front clip hasn't been touched yet. The doors and trunk lid are almost ready. Attached Images __________________ Enjoy! Curt

01-24-2011, 10:26 PM	#137
Ocikat Drives: 2012 2LT 45th convertible Join Date: Jul 2010 Location: Albuquerque Posts: 949	oooooooooooooooohhhhhhhhh PAINT !!! This is a milestone This is gonna be nice Curt !! __________________ Top Ten Reasons I Procrastinate 1.

01-25-2011, 11:35 AM	#138
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	YIIIIIIIPPEEEEEE! Can't wait! __________________ LPE 650 BHP package Dual disc clutch set Borla catback exhaust-S type DSS 9" rear with 3.90 gear Pfadt suspension/Hotchkiss chassis brace Forgeline Wheels VR3S/Nitto tires Beware of the LPE Sisterhood

01-26-2011, 06:20 PM	#139
cjingle Drives: 1969 Camaro RS, 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Albuquerque, New Mexico Posts: 587	Primer! More pictures (in primer). The plan (as far as I know) will be this will happen two more times. Sand, prime, sand, prime. Then, the front clip, doors, trunk lid, and hood all go through the same thing. Then, it all gets put together. Final sand, prime, then paint. Jim wants to make sure the color is consistent as it is very close to a candy color. Attached Images __________________ Enjoy! Curt

01-26-2011, 09:03 PM	#140
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Looking really good Curt. I like what I see. Ivan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 10:06 AM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 12:59 AM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 08:02 PM