05-10-2012, 09:11 AM | #281 |
Winners find a way
Drives: 2010 2LT/RS M6 Join Date: Jun 2010
Location: NE Ohio
Posts: 1,137
|
I put the 4 spacers on top of the 4 hole gasket, will that be a problem? I haven't started the car yet, did the mod last night.
__________________
Injen LT | Magnaflows | BBK LT & HFC | Mace 25mm & P Spacer |Richmond 3.73 | Trifecta Tune
RX Catch Can & Breather | Pedders Inserts | IDEALG Clutch MC & GTO Reservoir | JDP Colorshift Halos | Drake Bowtie Delete | |
05-10-2012, 09:14 AM | #282 |
Drives: LLT Machine Join Date: Nov 2011
Location: VIC/AUS
Posts: 563
|
|
05-10-2012, 11:49 AM | #283 | |
Winners find a way
Drives: 2010 2LT/RS M6 Join Date: Jun 2010
Location: NE Ohio
Posts: 1,137
|
Quote:
Thanks, I used the gasket maker on the manifold side of the spacer and the factory gasket in the cover side.
__________________
Injen LT | Magnaflows | BBK LT & HFC | Mace 25mm & P Spacer |Richmond 3.73 | Trifecta Tune
RX Catch Can & Breather | Pedders Inserts | IDEALG Clutch MC & GTO Reservoir | JDP Colorshift Halos | Drake Bowtie Delete | |
|
05-10-2012, 08:21 PM | #284 | |
Drives: LLT Machine Join Date: Nov 2011
Location: VIC/AUS
Posts: 563
|
Quote:
Preference though would be to run no factory gaskets or both |
|
05-10-2012, 08:25 PM | #285 |
Winners find a way
Drives: 2010 2LT/RS M6 Join Date: Jun 2010
Location: NE Ohio
Posts: 1,137
|
If I decided to run factory gaskets on both sides, would I also need a second center 4 hole gasket?
__________________
Injen LT | Magnaflows | BBK LT & HFC | Mace 25mm & P Spacer |Richmond 3.73 | Trifecta Tune
RX Catch Can & Breather | Pedders Inserts | IDEALG Clutch MC & GTO Reservoir | JDP Colorshift Halos | Drake Bowtie Delete | |
05-10-2012, 08:47 PM | #286 |
Drives: LLT Machine Join Date: Nov 2011
Location: VIC/AUS
Posts: 563
|
|
05-10-2012, 09:07 PM | #287 | |
Winners find a way
Drives: 2010 2LT/RS M6 Join Date: Jun 2010
Location: NE Ohio
Posts: 1,137
|
Quote:
Thanks, sounds like what I've done.
__________________
Injen LT | Magnaflows | BBK LT & HFC | Mace 25mm & P Spacer |Richmond 3.73 | Trifecta Tune
RX Catch Can & Breather | Pedders Inserts | IDEALG Clutch MC & GTO Reservoir | JDP Colorshift Halos | Drake Bowtie Delete | |
|
05-10-2012, 09:08 PM | #288 |
Drives: LLT Machine Join Date: Nov 2011
Location: VIC/AUS
Posts: 563
|
|
05-10-2012, 11:17 PM | #289 |
Drives: 2010 LLT V6. Join Date: May 2012
Location: Calgary, Alberta
Posts: 1
|
Just wanted to say thanks Steve from MACE for the great combo deal on the Plenum spacer and 25mm insulator, everything needed for the install was supplied and by buying a 13mm swivel ratchet for the bolts in the rear the job only took bout 1.5hr total. My ilde seems to feel better and the low end torque feels allot better my CEL came on but it went away after about half hour of driving turning the car off and restarting. Next up some cams, I am waiting patiently but I hope to get my paws on em before I go on a long road trip to Vegas! this summer.
|
05-11-2012, 07:26 PM | #290 |
crazier than a coconut
Drives: 2010 2SS/RS LS3 Join Date: Jul 2010
Location: virginia
Posts: 1,547
|
so i hit the dyno today but i am NOT posting the results. not sure what is going on, but im pulling mad timing and need to get a data log off to vince so he can look at it and make any corrections necessary. down low, KR was 1-2* but up top above 5500rpm i was pulling up to 9* of KR...so, until this gets straightened out with vince, then you'll just have to keep waiting...sorry guys
__________________
|
05-11-2012, 10:06 PM | #291 |
Account Suspended
Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,658
|
follow this direction for free service manual.
I hope I get Kudo's for this one! https://elibrary.mel.org/validate?ur...ch%3Fdb%3DCHLL And for the Login ID, just use ANY letter and then 12 numbers. Any 12 numbers, that is the format for a Michigan License number. So like "a123456789012" Sounds crazy, but it works! Feel free to print, pdf, or whatever to keep a record because you will never know when this will go down. props to DSM! Enjoy Guys! |
05-11-2012, 11:25 PM | #292 |
crazier than a coconut
Drives: 2010 2SS/RS LS3 Join Date: Jul 2010
Location: virginia
Posts: 1,547
|
KUDO's JAY!!! it works...
__________________
|
05-12-2012, 07:53 AM | #293 | |||
Drives: LLT Machine Join Date: Nov 2011
Location: VIC/AUS
Posts: 563
|
Quote:
Quote:
Quote:
|
|||
05-12-2012, 08:49 AM | #294 |
Winners find a way
Drives: 2010 2LT/RS M6 Join Date: Jun 2010
Location: NE Ohio
Posts: 1,137
|
Thanks bmore...
__________________
Injen LT | Magnaflows | BBK LT & HFC | Mace 25mm & P Spacer |Richmond 3.73 | Trifecta Tune
RX Catch Can & Breather | Pedders Inserts | IDEALG Clutch MC & GTO Reservoir | JDP Colorshift Halos | Drake Bowtie Delete | |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Join TEAM LLT social group | RSokie | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 2849 | 02-10-2014 09:41 PM |
MACE 25mm Manifold spacer/ insulator to suit LLT | MACE_ENG | V6 Bolt-Ons & Tunes | 50 | 07-16-2012 12:39 AM |
Vmax Intake Manifold "BLACK ICE-olator" V6 LLT Base Test Results | Mike Norris | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 297 | 03-31-2012 07:41 PM |
Throttle Body Spacer on LLT | Nutbutt | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 19 | 11-14-2011 11:02 PM |