05-06-2009, 02:27 PM | #1 |
Drives: abm2ssrs Join Date: Apr 2009
Location: still out of my mind
Posts: 2,095
|
body colored molded mud guard possible problem
just went to my dealer he was putting on a set of mud guards on a 2ss the front one didnt look right because of the little gm symbol on the lower part of the fender .the guard goes over it by about an 8th to 1/4 inch over it .so it doent fit flush .may be a concern for anyone who wants to go after market .i think maybe they should have put a cut out on the flap itself to go around the gm emblem. i only care because if its not flush all kinds of shit will get into that gap .im not complaining im just putting it out there
|
05-06-2009, 02:36 PM | #2 |
Rider of the short BUS
Drives: Ukon/F350(work)/Intruder800 Join Date: Dec 2008
Location: London, KY
Posts: 268
|
Thats strange the pics I saw of them installed on the car they missed the emblem by more than an inch.
__________________
SIM with CGM rallies
|
05-06-2009, 02:37 PM | #3 |
Drives: 2010 Camaro 2SS RS BLk/IOM Join Date: Feb 2009
Location: Indiana
Posts: 262
|
I was planning on getting these but after seeing some pictures, not so sure. Is there any regular mud flaps made for the new camaro? I hope some more options are available soon.
|
05-06-2009, 02:38 PM | #4 |
Drives: 2SS RJT Join Date: Mar 2009
Location: Mexico, Missouri
Posts: 136
|
I'd take some dental floss and remove that GM symbol in a heartbeat if it meant I was going to have a gap. It looks weird stuck down there any way.
__________________
2SS, RJT, Gray interior, 6 Speed Trans /w TAPshift, silver stripes and polished wheels
|
05-06-2009, 02:39 PM | #5 |
Drives: abm2ssrs Join Date: Apr 2009
Location: still out of my mind
Posts: 2,095
|
|
05-06-2009, 02:44 PM | #6 |
Then you're gonna love me
Drives: 2010 Black Camaro Tumbler RS Join Date: Dec 2007
Location: NW Gotham, IL
Posts: 1,599
|
I've seen a few others with the quarter flare mud flaps with the same clearance from the GM emblem, that should not be an issue...
__________________
Own- "Does it come in Black?" Exterior/ Grey Interior 2LT/RS Automatic
_____________________________________ The Batman would only drive a 2010 Camaro and buy from Camaro Scotty. 'Nuff said. Anyone that knows of a place that is making the Concept Shifter for the new Camaro. (Auto specifically) Please let me know. Order# NDTMVP Ordered 10/23/08. 2000 on 5/21/09... It begins..... 4B00 on 6/26/09... In transit to the Cave 5000 on 7/6/09 it waits for my arrival! 1000000 on 7/10/09 The Tumbler is in the Cave! |
05-06-2009, 02:46 PM | #7 |
Rider of the short BUS
Drives: Ukon/F350(work)/Intruder800 Join Date: Dec 2008
Location: London, KY
Posts: 268
|
After looking at other picture without the mud flats, maybe they moved the emblems back a bit to make room?
I don't think so though.
__________________
SIM with CGM rallies
|
05-06-2009, 02:47 PM | #8 |
Booooosted.
|
Maybe he was putting the REAR ones on the front?
|
05-06-2009, 02:48 PM | #9 | |
Then you're gonna love me
Drives: 2010 Black Camaro Tumbler RS Join Date: Dec 2007
Location: NW Gotham, IL
Posts: 1,599
|
Quote:
__________________
Own- "Does it come in Black?" Exterior/ Grey Interior 2LT/RS Automatic
_____________________________________ The Batman would only drive a 2010 Camaro and buy from Camaro Scotty. 'Nuff said. Anyone that knows of a place that is making the Concept Shifter for the new Camaro. (Auto specifically) Please let me know. Order# NDTMVP Ordered 10/23/08. 2000 on 5/21/09... It begins..... 4B00 on 6/26/09... In transit to the Cave 5000 on 7/6/09 it waits for my arrival! 1000000 on 7/10/09 The Tumbler is in the Cave! |
|
05-06-2009, 02:51 PM | #10 |
Rider of the short BUS
Drives: Ukon/F350(work)/Intruder800 Join Date: Dec 2008
Location: London, KY
Posts: 268
|
maybe thats the moles job and he screwed that one up while reading forums.
__________________
SIM with CGM rallies
|
05-06-2009, 02:53 PM | #11 |
Drives: abm2ssrs Join Date: Apr 2009
Location: still out of my mind
Posts: 2,095
|
all i know is that i will be doing them myself
|
05-06-2009, 02:53 PM | #12 |
Drives: 2010 Camaro SS Join Date: Jan 2009
Location: Maryland
Posts: 973
|
Lol hillbilly
|
05-06-2009, 03:00 PM | #13 |
Could it be a LT vs SS? The original post was a SS and the pictures were a LT.
__________________
2 SS CGM RS, IOM interior, Customized by Clean Cut Creations St. Louis, MO
|
|
05-06-2009, 03:08 PM | #14 | |
Drives: . Join Date: Mar 2009
Location: Ventura, Ca
Posts: 327
|
Quote:
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Poll: body colored ground effects package | 2010_5thgen | Cosmetics and Lighting Modification Discussions | 46 | 01-06-2010 06:53 AM |
Antenna should be body colored | PAUL SS | Cosmetics and Lighting Modification Discussions | 23 | 04-27-2009 03:10 PM |
body molded mud guards vs rear defuser | mrpre10der | 5th Gen Camaro SS LS LT General Discussions | 9 | 04-10-2009 09:29 PM |
Body Colored Engine Covers Option | camarolt76 | Cosmetics and Lighting Modification Discussions | 29 | 02-16-2009 11:21 AM |