How to Adjust Your Camaro's Door Glass (in 3 directions) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*TAG UR IT* · 03-05-2010, 03:00 AM

Take it back to the dealer and let them see if there's something wrong.

For all the issues with going up and back down, take it in. Let the dealer check it out. But, measure your window first. See if the gaps are correct. If they are, let the dealer look at it. I honestly don't know why it would reverse itself and go back down a few inches.

linnz28 · 03-05-2010, 01:13 PM

On the issue with the window going up and then back down a couple of inches - the window could be out of alignment and putting pressure on the motor when it goes up. most of the new window motors have a safety feature that when it feels a certain amount of pressure it will go back down. keeps from getting hands, fingers, etc, pinched in the window.

LT1Jeep · 03-05-2010, 07:08 PM

it only does that with the AUTO UP feature. if i hold the switch it goes up and stops. only once did it not go up and then i just opened and closed the door and it worked. i guess its an adjustment, but it only does it sometimes. weird

jsharp · 03-06-2010, 08:04 AM

mine has given me a message 2 times this month that says "roll window all the way up and then back but shit I have to do it 5 times and turn the key off and back on to clear the code and then the window works as it should?????

*TAG UR IT* · 03-06-2010, 12:31 PM

I AM CURRENTLY TRYING TO FIND THE FIX FOR THE ABOVE ISSUES.

Guys, it's obvious there's some other issues going on just by reading above. It has to do with the window regulator memory. Give me some time...I will do everything I can to try and get the information so we can get everyone back on track!

LT1Jeep · 03-07-2010, 11:14 AM

thanks tag. its one of those little annoyances that can drive a man nuts

*TAG UR IT* · 03-07-2010, 12:35 PM

^You're welcome.

I hope I can get the info...we have a few folks here who would really appreciate it.

I'm tryin'!

NightmareSS · 03-08-2010, 05:57 PM

cool tag...thx

tjd24 · 03-08-2010, 06:47 PM

Quote:

Originally Posted by jsharp

mine has given me a message 2 times this month that says "roll window all the way up and then back but shit I have to do it 5 times and turn the key off and back on to clear the code and then the window works as it should?????

+1 - this just started for me today - never saw the message in the DIC before - appeared after stopping at Starbucks on the way to work. Didn't clear rolling down then up, when I paged to another screen on the DIC the message went away. It has reappeared every time I started the rest of the day.

Will add to dealer list unless Tag you know a solution... thanks.

*TAG UR IT* · 03-08-2010, 09:19 PM

I am waiting on info...hope we can find a fix. For now, I would recommend asking the dealer by phone or by taking it in. As soon as I get something, ya'll will be the first to know.

catmaster1 · 03-08-2010, 09:35 PM

Quote:

Originally Posted by jsharp

mine has given me a message 2 times this month that says "roll window all the way up and then back but shit I have to do it 5 times and turn the key off and back on to clear the code and then the window works as it should?????

I had the same thing on my DIC the day i picked up my car. I remembered reading somewhere on this site that it happened to someone else as well. I did the all the way up and down thing about 5 times and the message went away and has worked great ever since. Must have needed to index the window on the drivers side since it was the one opening and closing the whole time. Good luck to all those with issues, and remember, your car is still under warranty! Bring it in and support your dealers, they get a check from GM for doing warranty. And if they cant get it figured out, do TAG's fix is my suggestion.

tjd24 · 03-09-2010, 08:07 AM

Quote:

Originally Posted by TAG UR IT

I am waiting on info...hope we can find a fix. For now, I would recommend asking the dealer by phone or by taking it in. As soon as I get something, ya'll will be the first to know.

Thanks - didn't have the issue on the commute to work this morning so its a gremlin...

*TAG UR IT* · 03-09-2010, 11:42 PM

Apparently, there are 3 different ways to reset the door glass motor memory.

Two can be done by the vehicle owner in his/her own driveway and there's one other that needs to be done at the dealer only (need a scanner tool).

Working out the specifics and should have all the info tomorrow!

Keep an eye peeled for it!!!

*TAG UR IT* · 03-12-2010, 12:20 PM

Here you go guys.....this is for those wanting to reset those window motor memories. Have at it!

http://www.camaro5.com/forums/showth...01#post1580501

03-05-2010, 07:08 PM	#17
LT1Jeep Ecstatic Camaro SS Owner Drives: Jeep(s) [1in pieces] and 2010 SS/RS Join Date: Oct 2008 Location: Westchester NY Posts: 319 View My Garage	it only does that with the AUTO UP feature. if i hold the switch it goes up and stops. only once did it not go up and then i just opened and closed the door and it worked. i guess its an adjustment, but it only does it sometimes. weird __________________

03-06-2010, 08:04 AM	#18
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	mine has given me a message 2 times this month that says "roll window all the way up and then back but shit I have to do it 5 times and turn the key off and back on to clear the code and then the window works as it should????? __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

03-07-2010, 11:14 AM	#20
LT1Jeep Ecstatic Camaro SS Owner Drives: Jeep(s) [1in pieces] and 2010 SS/RS Join Date: Oct 2008 Location: Westchester NY Posts: 319 View My Garage	thanks tag. its one of those little annoyances that can drive a man nuts __________________

03-08-2010, 05:57 PM	#22
NightmareSS Drives: 2010 Camaro SS/RS 92 300zx 2001 Ram Join Date: Feb 2009 Location: Staten Island, NYC Posts: 1,388	cool tag...thx __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
70 Camaros reported at Wentzville, MO Rail Yard	Liberty1	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	34	08-26-2009 10:40 AM

03-05-2010, 03:00 AM	#15
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Take it back to the dealer and let them see if there's something wrong. For all the issues with going up and back down, take it in. Let the dealer check it out. But, measure your window first. See if the gaps are correct. If they are, let the dealer look at it. I honestly don't know why it would reverse itself and go back down a few inches.

03-05-2010, 01:13 PM	#16
linnz28 Drives: '07 SBO Avalanche Join Date: Oct 2008 Location: Indiana Posts: 3	On the issue with the window going up and then back down a couple of inches - the window could be out of alignment and putting pressure on the motor when it goes up. most of the new window motors have a safety feature that when it feels a certain amount of pressure it will go back down. keeps from getting hands, fingers, etc, pinched in the window.

03-06-2010, 12:31 PM	#19
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	I AM CURRENTLY TRYING TO FIND THE FIX FOR THE ABOVE ISSUES. Guys, it's obvious there's some other issues going on just by reading above. It has to do with the window regulator memory. Give me some time...I will do everything I can to try and get the information so we can get everyone back on track!

03-07-2010, 12:35 PM	#21
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	^You're welcome. I hope I can get the info...we have a few folks here who would really appreciate it. I'm tryin'!

03-08-2010, 09:19 PM	#24
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	I am waiting on info...hope we can find a fix. For now, I would recommend asking the dealer by phone or by taking it in. As soon as I get something, ya'll will be the first to know.

03-09-2010, 11:42 PM	#27
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Apparently, there are 3 different ways to reset the door glass motor memory. Two can be done by the vehicle owner in his/her own driveway and there's one other that needs to be done at the dealer only (need a scanner tool). Working out the specifics and should have all the info tomorrow! Keep an eye peeled for it!!!

03-12-2010, 12:20 PM	#28
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Here you go guys.....this is for those wanting to reset those window motor memories. Have at it! http://www.camaro5.com/forums/showth...01#post1580501