09-21-2013, 01:39 PM | #1 |
502 RWHP N/A
|
3600 installed
Got car back after 2 weeks waiting on re stall feels good only have driven on street hitting up kennadale tomorrow after noon to see what it does
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
09-21-2013, 02:39 PM | #2 |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
09-21-2013, 04:12 PM | #3 |
Drives: 2011 2SS Join Date: Jan 2013
Location: DFW, TX
Posts: 931
|
Is the sig accurate for your best time?
|
09-21-2013, 05:20 PM | #4 |
502 RWHP N/A
|
Before the 3600 yes, going tomorrow to change that lol
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
09-21-2013, 05:43 PM | #5 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Cool, sub 11s?
__________________
|
09-21-2013, 06:26 PM | #6 |
502 RWHP N/A
|
Going to 1/8 mile track tomorrow 1/4 mile aren't open often not gonna see 1/4 mile till Camaro vs mustang until then I need to practice launching and getting better 60 fts
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
09-21-2013, 06:27 PM | #7 |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
Track conditions should be near perfect tomorrow sasquash.
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
09-21-2013, 06:30 PM | #8 |
502 RWHP N/A
|
Gonna get some data logs done tomorrow curtesy of white ss
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
09-21-2013, 07:21 PM | #9 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Tomorrow's weather is going to be very similar to today's, and the DA is right around 2000'. So while it might be "nice" outside, the weather is far from perfect IMO.
Wait until a cool night late in October or in November when the DA gets under zero. That's about as perfect as it gets here. If sasquash's car will hook tomorrow, it'll go 7.60's and maybe get into the 50's. |
09-21-2013, 07:30 PM | #10 |
What's this button do?
Drives: 2019 Black 2SS Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,364
|
Gee thanks for the clarification Mr. Accuweather!
__________________
2019 Black & Red & Silver 2SS - Bone Stock
|
09-21-2013, 08:25 PM | #11 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
What was the stall rated before you restalled it? And what was ur 60ft on your sig pass?
|
09-21-2013, 09:49 PM | #12 |
502 RWHP N/A
|
it was a 2800, 1.888 60 ft with that 2800, 2800 wasnt cutting it i now have the same set up as white ss so....with his experience with his car and data logging and practice i should run his times on a good cool day with good da
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
09-21-2013, 10:03 PM | #13 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
U are running his old cam right?
|
09-21-2013, 10:32 PM | #14 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
His car is the same setup as mine was, only his heads were milled (should be worth a few hp) and he's about 100lbs lighter than I am.
Car should be good for an 11.4x in GREAT air. |
|
|