07-12-2013, 10:30 AM | #1 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
1st time Adams user.
I used Clay, Glaze and Americana yesterday. I have to say the results are
wonderful. It took 5 hours start to finish. But man am I sore today. Removing the Americana by hand tired me out. Here are a couple of pics. Enjoy.....
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
07-12-2013, 10:57 AM | #2 |
Drives: 2013 BRM LS M6 Join Date: Apr 2013
Location: Northern Indiana
Posts: 98
|
Beautiful car, I'm sure the shine was worth the work
|
07-12-2013, 11:05 AM | #3 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
Very nice, looks great!
If you struggled with removal of Americana, next time go lighter with the application and only do 1-2 body panels at a time before you remove the residue. If you get too far ahead of yourself or go too heavy with it, you'll have a hard time removing it as you may have found. Time to get some SVRT on those tires. |
07-12-2013, 11:10 AM | #4 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
Going to look at machine removal next time. Can you buff it off? Question on the SVRT. Does it collect dust? I live in way west Texas. Lots of sand and dust in the air. More than rain. LOL I prefer the dull look over wet and shine, if it collects dirt.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
07-12-2013, 12:13 PM | #5 |
|
looks fantastic sir nice work
__________________
Laus Deo
|
07-12-2013, 12:45 PM | #6 | |
|
Quote:
SVRT does not collect dust and leaves a satin finish as opposed to that disgusting shiny silicone look favored by rappers. If you're willing to branch out of Adams land, look into Ultima Tire and Trim Guard. Lasts about 4x as long as SVRT. Or call Adam and ask him to stop dragging his feet on Black Out, which I've been testing for them and is AH-MAZINGGGGG.
__________________
[B]
|
|
07-12-2013, 12:51 PM | #7 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
Looks fantastic!
|
07-13-2013, 04:37 PM | #8 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
Thanks for the complements. Well worth the effort. I thought I kept a clean good looking car. But it got better with glaze and Americana.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
07-13-2013, 04:47 PM | #9 |
Drives: Eastbound and Down Join Date: May 2012
Location: Nor Cal
Posts: 555
|
Looks great, beautiful car.
__________________
|
07-15-2013, 08:17 PM | #10 |
Drives: 79 transam with 582cid dart motor Join Date: Jun 2010
Location: missouri
Posts: 529
|
Look very nice...love the color...
__________________
2010 Camaro (inferno orange, 2SS, RS and such) cat backs, catch can, CAI on the way 79 Transam, 582 cid dart motor 779hp 315's out back 40spline gdaxles tko tranny |
|
|
|
|