You are browsing camaro5 
 |
|
08-06-2014, 05:29 PM
|
#1 |
 
Drives: 2012 Camaro SS Join Date: Feb 2013
Location: Dallas, TX
Posts: 50
|
Cold Air Intake CEL
Just installed a K&N CAI on my Camaro and now I'm getting a P0101. Any know of any home remedies for this? Never came on until I installed the CAI. Some help would be appreciated!
__________________
 2012 LS3 SS, Zl1 Spoiler, 21" Hot Wheels Edition Rims, Pirelli 245/40R21 & 275/35R21, OEM Ambient Lighting |
|
|
|
08-06-2014, 06:43 PM
|
#2 |
|
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Contact K&N... there were some guys here that had issues... don't remember exact out come but i know this can happen with a certain model of the K&N... basically you have to get a different one... no real home remedies...
__________________
|
|
|
|
|
08-06-2014, 06:45 PM
|
#3 |
     
Drives: 2013 SW 2LT/RS LFX/AY6 Join Date: Feb 2013
Location: Orlando, FL
Posts: 1,741
|
If you have the Aircharger intake (the black tube) then yeah, you have "the issue one" and need to talk to K&N, but if you have the Typhoon intake (polished tube) double check the MAF connector and direction, fittings, etc... and then contact K&N.
__________________
K&N CAI, 1LE Strut Tower Brace, Elite Engineering Catch Can and Clean Side Separator, Apex Scoop w/ Washer Relocation Kit, CTS Front Calipers and Rotors, JacFab Ported Intake Manifold, JacFab Intake Manifold Spacer, 80mm Overkill Throttle Body, SS Brake Lines, Ideal Garage Master Cylinder, Monster Twin Disc Clutch, NPP Retrofit w/ Magnaflow Resonated X, ARH Catless Downpipes, JRE Built 3.45 Diff, 1LE Axles, 1LE Hubs, Overkill Tuned, BMR Anti Wheel-hop Kit Stage I, ACS TL1 Hood Insert, ZL1 Spoiler
|
|
|
|
|
08-06-2014, 11:13 PM
|
#4 | |
|
Drives: 2012 Camaro SS Join Date: Feb 2013
Location: Dallas, TX
Posts: 50
|
Quote:
__________________
2012 LS3 SS, Zl1 Spoiler, 21" Hot Wheels Edition Rims, Pirelli 245/40R21 & 275/35R21, OEM Ambient Lighting |
|
|
|
|
|
08-07-2014, 12:03 AM
|
#5 |
|
Drives: 2013 SW 2LT/RS LFX/AY6 Join Date: Feb 2013
Location: Orlando, FL
Posts: 1,741
|
Exactly what scrming said. Other forum members have had problems with that exact intake. We don't know why it happens and there's no real fix that we know of.
__________________
K&N CAI, 1LE Strut Tower Brace, Elite Engineering Catch Can and Clean Side Separator, Apex Scoop w/ Washer Relocation Kit, CTS Front Calipers and Rotors, JacFab Ported Intake Manifold, JacFab Intake Manifold Spacer, 80mm Overkill Throttle Body, SS Brake Lines, Ideal Garage Master Cylinder, Monster Twin Disc Clutch, NPP Retrofit w/ Magnaflow Resonated X, ARH Catless Downpipes, JRE Built 3.45 Diff, 1LE Axles, 1LE Hubs, Overkill Tuned, BMR Anti Wheel-hop Kit Stage I, ACS TL1 Hood Insert, ZL1 Spoiler
|
|
|
|
|
|
|
|
 |
|
|
