You are browsing camaro5 
 |
|
06-19-2012, 08:54 PM
|
#1 |
 Drives: 45th 2SS Join Date: Dec 2011
Location: Albany Oregon
Posts: 43
|
Quick question about Adam's PC Pads....
Probably a stupid one, but I searched and couldn't find the answer
 I just got the premium PC kit and some other goodies .... and thought would watch the DVD that came with the kit... in it I noticed they were using "Hexigonal" sp? pads, and were talking specifically about them when using the PC kit... my kit came with "egg crate" type pads... which from some of the searching I did, sounds like for the flex, you don't want to use the hex pads... Are these the right pads for the PC? Thanks -B |
|
|
|
06-19-2012, 08:59 PM
|
#2 |
|
Drives: 45th 2SS Join Date: Dec 2011
Location: Albany Oregon
Posts: 43
|
when referring to "hex" pads I mean these.. . this is what I saw in the video.. which is different than I recieved...
|
|
|
|
|
06-19-2012, 09:02 PM
|
#3 |
           
|
You're good to go. They updated their pads to a more efficient design that other manufacturers use.
Give it a little tappy tap
__________________
[B]
 |
|
|
|
|
06-19-2012, 10:33 PM
|
#4 |
|
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,330
|
OMG.....those ARE HEXAGANAL ...... see the little shapes all over the design of the pad......they are liuttle HEXAGONS! LOL you know.....little 6 sided figures.
__________________
 |
|
|
|
|
06-19-2012, 11:33 PM
|
#5 | |
|
|
Quote:
No need to go off half ****ed and make him look stupid when you misread it. Give it a little tappy tap
__________________
[B]
|
|
|
|
|
|
06-19-2012, 11:57 PM
|
#6 |
|
|
I had the same question when I recieved my pads. I guess the new design works better.
|
|
|
|
|
06-20-2012, 12:23 AM
|
#7 | |
|
|
Quote:
Personally I'm moving to microfiber pads nowadays. Give it a little tappy tap
__________________
[B]
|
|
|
|
|
|
06-20-2012, 06:37 AM
|
#8 | |
|
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,330
|
Quote:
The picture he posted is what they make for the PC. WE don't know what specific part of the video he was refering to.....as they video has EVERYTHING on it....had he been looking at the part of they video where they are using the flex.....the pads are DIFFERENT.
__________________
|
|
|
|
|
|
06-20-2012, 10:40 AM
|
#9 |
|
Drives: 45th 2SS Join Date: Dec 2011
Location: Albany Oregon
Posts: 43
|
lol all good everyone... as I noted in the post... I noticed when they were using the flex the pads were different than when they were using the PC... hense my question. When I recieved pads that they were not using on the PC (in the video), AND since I ordered the PC kit... wasn't sure if I was supposed to get different pads...
thanks for the reply's... glad I wasn't the only one who wondered about this... =) -B |
|
|
|
|
06-20-2012, 12:16 PM
|
#10 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
Yep, same foam composition, we used to have 2 styles of pads that were each suited to the 2 different polishers. The updated videos showing the new pads are online and will start being shipped with new DVD's in a few weeks.
http://www.adamspolishes.com/t-Adams...12_UPDATE.aspx The process stays the same... the only real change is that you can now use the same pads with both machines. Sorry for the confusion. |
|
|
|
|
|
|
|
 |
|
|
