My Car is getting SCREWED by Techco! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

gotpball44 · 06-16-2009, 03:22 AM

Hey guys,
The title is not like what it sounds lol. My car is back at Techco Superchargers for the R&D. The process is underway and soon it will be available. They just finished the corvette LS3 and now going to my Camaro. They are great systems and very cool guys. Now just cant wait now till its done!

What the supercharger is all about:

The Revolutionary design allows air to move through the supercharger quickly and efficiently, without significant heat buildup, and at the highest resulting airflow volume at low boost output. The performance result is maximized horsepower and torque output.

Key Features of The TECHCO Reverse-Revolution Twin Screw Supercharger™.

* Reverse-Revolution Twin Screw Compressor with Asymmetric Multi-Lobe Screws
* 3.0L / 180 cu. in. Displacement
* Font Induction with Integrated Bypass
* 10 Inch Long Intake Runners
* Dual Stage Intercooler System with Single-Pass Coolant Flow through the A-Frame (2) Intercoolers, Large Capacity Heat Exchanger, High Volume Intercooler Pump and Recovery Tank
* Open Element Cold Air Kit with High-Flow Air Filter, CNC Venturi and High Flow Inlet Tube
* Extruded Aluminum fuel Rails with upgraded fuel injectors where applicable
* Separate 8-Rib FEAD (Front End Accessory Drive) with Dampener
* Ultra-Light Weight Aluminum Construction
* Flash Programmer

-My car had some computer problems before, but finally worked it out. (GM replaced the ECM because it was faulty.) -

-Here is a link to there site: http://www.techcointl.com/default.asp

Here is some pics of me dropping it off and doing some Baseline Dynos. (Dyno power was 380rwhp and 385 torque on a Dynojet) Pretty impressive numbers!

What the system looks like on a challenger

My Motor without the cover on

My car on the dyno

Dyno #s

baileyrx · 06-16-2009, 03:30 AM

Looks a lot like the edelbrock e-force that's made for the mustang.

http://www.edelbrock.com/automotive_...injected.shtml

Great design, should put down some great numbers at low psi. Long runners help power output...

Zeus95 · 06-16-2009, 06:38 AM

Looks sweet !!

DarricSS · 06-16-2009, 06:57 AM

Nice!

My only complaint is the name Techco to me it sounds like a name for an R/C car or something.

baileyrx · 06-16-2009, 07:40 AM

Quote:

Originally Posted by DarricSS

Nice!

My only complaint is the name Techco to me it sounds like a name for an R/C car or something.

ya or like they need some flashing led lights to trim around the edges or something...

i just noticed that it looks like the runners are bolted onto the supercharger body?

Speed74SS · 06-16-2009, 10:50 AM

Looks good - keep us posted on the output and specifics.

*Milk 1027* · 06-16-2009, 02:50 PM

results....

gotpball44 · 06-16-2009, 04:03 PM

You guys gotta see these kits in person. I love how they look, because they a still look a bit stock and sits low.

*Milk 1027* · 06-16-2009, 04:04 PM

where is the shop located?

DntWrryBeHappy21 · 06-16-2009, 04:14 PM

sweet keep us posted on the results =)

maybe you should've titled it my car is getting blown by techco :-=p

gotpball44 · 06-16-2009, 04:18 PM

Quote:

Originally Posted by Milk 1027

where is the shop located?

They are located in Anaheim. About 10 mins away from me

gotpball44 · 06-16-2009, 04:21 PM

Quote:

Originally Posted by DntWrryBeHappy21

sweet keep us posted on the results =)

maybe you should've titled it my car is getting blown by techco :-=p

Its an inside thing because their shirts say, "i got screwed by techco." Because there system is a reverse twin SCREW system. So hence the screwed part lol

*Milk 1027* · 06-16-2009, 04:41 PM

Quote:

Originally Posted by gotpball44

They are located in Anaheim. About 10 mins away from me

nice.

They're not far from me either

smitty912 · 06-16-2009, 04:45 PM

Vids or it didn't happen

06-16-2009, 03:22 AM	#1
gotpball44 Boost Is Your Friend Drives: 2016 Hyper Blue 1SS Camaro Join Date: Oct 2008 Location: La Mirada CA Posts: 1,255 View My Garage	My Car is getting SCREWED by Techco! Hey guys, The title is not like what it sounds lol. My car is back at Techco Superchargers for the R&D. The process is underway and soon it will be available. They just finished the corvette LS3 and now going to my Camaro. They are great systems and very cool guys. Now just cant wait now till its done! What the supercharger is all about: The Revolutionary design allows air to move through the supercharger quickly and efficiently, without significant heat buildup, and at the highest resulting airflow volume at low boost output. The performance result is maximized horsepower and torque output. Key Features of The TECHCO Reverse-Revolution Twin Screw Supercharger™. * Reverse-Revolution Twin Screw Compressor with Asymmetric Multi-Lobe Screws * 3.0L / 180 cu. in. Displacement * Font Induction with Integrated Bypass * 10 Inch Long Intake Runners * Dual Stage Intercooler System with Single-Pass Coolant Flow through the A-Frame (2) Intercoolers, Large Capacity Heat Exchanger, High Volume Intercooler Pump and Recovery Tank * Open Element Cold Air Kit with High-Flow Air Filter, CNC Venturi and High Flow Inlet Tube * Extruded Aluminum fuel Rails with upgraded fuel injectors where applicable * Separate 8-Rib FEAD (Front End Accessory Drive) with Dampener * Ultra-Light Weight Aluminum Construction * Flash Programmer -My car had some computer problems before, but finally worked it out. (GM replaced the ECM because it was faulty.) - -Here is a link to there site: http://www.techcointl.com/default.asp Here is some pics of me dropping it off and doing some Baseline Dynos. (Dyno power was 380rwhp and 385 torque on a Dynojet) Pretty impressive numbers! What the system looks like on a challenger My Motor without the cover on My car on the dyno Dyno #s

06-16-2009, 03:30 AM	#2
baileyrx Drives: 2003 g35 Join Date: Apr 2008 Location: nc Posts: 198 View My Garage	Looks a lot like the edelbrock e-force that's made for the mustang. http://www.edelbrock.com/automotive_...injected.shtml Great design, should put down some great numbers at low psi. Long runners help power output... Last edited by baileyrx; 06-16-2009 at 07:44 AM.

06-16-2009, 06:38 AM	#3
Zeus95 Drives: IOM 2010 - 2SS/RS Join Date: Nov 2008 Location: Oak Forest - ILL Posts: 1,124 View My Garage	Looks sweet !! __________________ 2010 2SS/RS IOM Upgrades: Fastlane CAI / SLP II Loudmouth axle back / V Max Ported TB / Kook's Step Long Tube Headers / High flow cats / Straightline Tune / BMR front & rear sway bars / Hotchkin End Links / Hurst Short Throw. LG ZR28 Wheels 1 of 2 sets made. Pfadt trailing arms / Diff Bushings & Sub Frame bushings / 1LE Axle & Hubs.

06-16-2009, 06:57 AM	#4
DarricSS Drives: '10 Camaro SS Join Date: Apr 2009 Location: Gilbert, Arizona Posts: 1,047	Nice! My only complaint is the name Techco to me it sounds like a name for an R/C car or something. __________________ 2010, SIM, 2SS/RS, LS3, CGM Stripes

06-16-2009, 02:50 PM	#7
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,567 View My Garage	results.... __________________

06-16-2009, 10:50 AM	#6
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Looks good - keep us posted on the output and specifics.

06-16-2009, 04:03 PM	#8
gotpball44 Boost Is Your Friend Drives: 2016 Hyper Blue 1SS Camaro Join Date: Oct 2008 Location: La Mirada CA Posts: 1,255 View My Garage	You guys gotta see these kits in person. I love how they look, because they a still look a bit stock and sits low.

06-16-2009, 04:04 PM	#9
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,567 View My Garage	where is the shop located? __________________

06-16-2009, 04:14 PM	#10
DntWrryBeHappy21 Patiently Waiting... Drives: whatevers in the driveway atm Join Date: Aug 2008 Location: New Jersey Posts: 403	sweet keep us posted on the results =) maybe you should've titled it my car is getting blown by techco :-=p __________________ One day....

06-16-2009, 04:45 PM	#14
smitty912 Drives: 2007 G6 GT Join Date: Mar 2009 Location: Auburn Hills, MI Posts: 42	Vids or it didn't happen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing/Detailing for Newbies	MRK III Z28	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	125	02-05-2024 09:55 PM
Got my Zaino today	lordfriday2	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	261	05-31-2014 10:00 PM
What's considered a Muscle Car?	SyN	General Automotive + Other Cars Discussion	125	09-25-2010 12:04 AM
2010 Chevy Camaro SS Indy 500 Pace Car Drive	linkwpc	Camaro Photos \| Spyshots \| Video \| Media Gallery	0	05-23-2009 09:47 PM
Edmunds hangs with a Challenger SRT-8 for the weekend	Scotsman	General Automotive + Other Cars Discussion	11	04-21-2008 12:04 PM