bowtie replacement - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fatvit0 · 09-22-2009, 06:24 PM

does anybody know how to take off the front and rear bowtie to replace them w the defenderworx bowties

MSG' · 09-22-2009, 06:27 PM

you can remove the front by just pulling it off, it has pressure tabs on all 4 corners of it, just be gentle with it, and pull on each corner, and it will come off, the rear one is held on with 3m tape (i believe) you can use some fishing line to cut it loose, then some bug/tar remover to take the rest of the residue off.

MLCrisis · 09-24-2009, 08:31 AM

Here is a very detailed description of what you want to do. I followed these instructions myself and replaced bowties with polished aluminum ones. It was a very strait forward procedure but not as easy as it looks.With some persistence you will get them off.

http://www.mylrs.com/blogs/lrs/archi...mblem-kit.aspx

09-22-2009, 06:24 PM	#1
fatvit0 Drives: 2010 camaro 2SS w/RS Join Date: Jun 2009 Location: brooklyn Posts: 31	bowtie replacement does anybody know how to take off the front and rear bowtie to replace them w the defenderworx bowties

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K&N Replacement Air Filter	Kahdir	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	39	11-12-2014 10:21 PM
Colored rear bowtie and truck blackout	Tonka	Camaro Photoshops / Renderings Forum	2	07-27-2009 12:38 PM
How is the rear bowtie attached?	VenomZ302	Cosmetics and Lighting Modification Discussions	4	07-10-2009 10:03 PM
18, 19, & 20" replacement tires ...	dougmac	Wheels and Tires Talk Sponsored by The Tire Rack	3	03-29-2009 05:27 PM
Dale Jr heritage grill & Chevy bowtie.	Silver Streak	Cosmetics and Lighting Modification Discussions	32	02-13-2009 01:08 PM

09-22-2009, 06:27 PM	#2
MSG' Drives: 2010 1SS Camaro Join Date: Aug 2009 Location: Elgin, SC Posts: 832 View My Garage	you can remove the front by just pulling it off, it has pressure tabs on all 4 corners of it, just be gentle with it, and pull on each corner, and it will come off, the rear one is held on with 3m tape (i believe) you can use some fishing line to cut it loose, then some bug/tar remover to take the rest of the residue off.

09-24-2009, 08:31 AM	#3
MLCrisis Drives: 82 camaro/97 f150 Join Date: Feb 2009 Location: md Posts: 37	Here is a very detailed description of what you want to do. I followed these instructions myself and replaced bowties with polished aluminum ones. It was a very strait forward procedure but not as easy as it looks.With some persistence you will get them off. http://www.mylrs.com/blogs/lrs/archi...mblem-kit.aspx