11-23-2017, 05:03 AM | #1 |
1bad6
Drives: 2010 camaro Join Date: Sep 2017
Location: LA
Posts: 212
|
Question about quad tips
First, i would like to apoligize because this thread is probably going to have a stupid question within it.
I have a 2010 camaro v6, i'm going to do quad tips and already ordered the diffuser, i plan on puttig the quad tips on the stock exhaust for now, and then have them put on my mrt v1 once it comes, i checked on the bytehost thing where they sell the quad tips, and they have a bunch of dif measurements, how do i tell which one mine is? Example: 2.5"in / 4.0"out $125 + sh in USA |
11-23-2017, 08:44 AM | #2 |
Drives: 2012 camaro 2ss Join Date: Jun 2017
Location: US
Posts: 378
|
I'm not sure but I would think the mrt and stock would be different sizes
Sent from my SM-G930T1 using Tapatalk Edit: according to Google the 2.5 is the inlet size for both stock and mrt but I'd wait for the new exhaust so you only have to have the tips welded on once Last edited by c0r3yr0s3; 11-23-2017 at 08:55 AM. |
11-23-2017, 09:44 AM | #3 |
|
2.5" in / 4" out is what you want. But yeah, you should wait and have the tips installed the same time you have the mrt installed.
|
11-23-2017, 12:21 PM | #4 |
Drives: 1LE Join Date: May 2015
Location: California
Posts: 267
|
I did the same mod when I had a v6. I installed the diffuser then took it to a muffler shop to have the MRT and dual tips installed. came out nicely. 2.5/4 is what you'll want. i'd wait for the MRT to come in before putting the tips
|
11-23-2017, 02:44 PM | #5 |
1bad6
Drives: 2010 camaro Join Date: Sep 2017
Location: LA
Posts: 212
|
|
11-23-2017, 02:57 PM | #6 |
Drives: 2012 camaro 2ss Join Date: Jun 2017
Location: US
Posts: 378
|
|
11-23-2017, 03:13 PM | #7 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
Why would you do it twice?
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
11-23-2017, 03:30 PM | #8 |
1bad6
Drives: 2010 camaro Join Date: Sep 2017
Location: LA
Posts: 212
|
|
11-23-2017, 03:56 PM | #9 | |
Drives: 2012 camaro 2ss Join Date: Jun 2017
Location: US
Posts: 378
|
Quote:
Sent from my SM-G930T1 using Tapatalk |
|
11-23-2017, 04:12 PM | #10 |
|
The 3.5" is the diameter of the exhaust tip. The MRT exhaust uses 2.5" piping, so yeah, 2.5" in / 4" out is what you want; if you want smaller tips, then get 3.5" out, but I doubt that's the case haha.
|
11-23-2017, 05:45 PM | #11 |
1bad6
Drives: 2010 camaro Join Date: Sep 2017
Location: LA
Posts: 212
|
|
11-23-2017, 06:30 PM | #12 |
Drives: 2012 camaro 2ss Join Date: Jun 2017
Location: US
Posts: 378
|
|
12-29-2017, 08:47 AM | #13 |
Drives: 2017 Chevy Sonic RS 1.4T Join Date: Sep 2017
Location: Riverview, Florida
Posts: 327
|
Pretty sure you can't put tips on the stock because the muffler is so close to the original tips... Would have to do more hacking to move the mufflers forward. Waste of time IMO but good luck
__________________
2015 Camaro RS/SS SIM LS3- Sold
2017 Sonic Mosaic Black RS 1.4T |
01-23-2018, 08:25 AM | #14 |
Drives: 2012 Camaro LS V6 Join Date: Aug 2016
Location: Ohio
Posts: 124
|
I'm thinking of doing this myself here soon. Can I get some recommendations on which tips look best? I see some at AutoZone that look terrible so I'll probably be ordering them online and I want to make sure I get the best looking quad tips.
Maybe I should start my own thread... |
|
|
|
|