12-07-2012, 11:02 PM | #1 |
Drives: 2012 ZL1 Join Date: May 2012
Location: Charles Town, W.V.
Posts: 64
|
ZL1 SLightly Used Aftermarket Parts....
I have some parts I removed off my ZL1 before I sold it
1.KOOKS HEADERS 2" with cat delete pipes ALMOST NEW CONDITION Paid $1200 Asking $800 SOLD!!!!!!!!!!!!!!!!!!!!!!!!!! 2.Roto-Fab intake Red couplings paid $450 asking $350 3. KDI Heat exchanger paid $800 asking $650SOLD!!!!!!!!! 4.Upper and lower pulleys $200 UPPER PULLEY SOLD!!!!!!!!! 5. XD catch can $100 SOLD!!!!!!!!!! 6.Oracle led sidemarkers Victory red/clear $250 7. ATI Damper $400 8. ID850 Injectors SOLD!!! $750 9. Roto-fab resivor for supercharger adds 1 gallon capacity $75 SOLD!!!!!!!!! 10.stock front and rear brake pads $200 Less than 900 miles on them Call 304-261-2953 with any questions or offers Last edited by dirtymax70; 12-30-2012 at 12:07 PM. |
12-08-2012, 10:25 AM | #2 |
Drives: 2013 ZL1 Join Date: Jul 2012
Location: upstate New York
Posts: 166
|
Do you happen to have any pics? I might be interested in a few things.
__________________
2013 ZL1 AGM, ECF, A6, sunroof, black rims
mods complete! 664 RWHP, 645 RWTQ Ported snout, 2.5 upper, Innovators west balancer with 9.1 lower, New era intake, American Racing long tube headers with hollow cats and X pipe, KDI heat exchanger, ID850's, TS29 cam ! |
12-08-2012, 07:23 PM | #3 |
Drives: 2017 ZL1 Join Date: Nov 2012
Location: Olive Branch MS
Posts: 103
|
How used? Mileage/time...
Also, what psi did your pullies get you...pre and post header install if available? Thanks! Scott |
12-08-2012, 08:05 PM | #4 |
Drives: 2012 ZL1 Join Date: May 2012
Location: Charles Town, W.V.
Posts: 64
|
I had all the stuff on the car for about 4,000 miles or so. Everything looks/functions as new. I can get pictures of anything you want. Just let me know what you want pictures of and ill get them.
As far a Psi from boost, I was just over 16 on the dyno. Headers were installed at the same time as pulleys, so thats all I have to base off of. Thanks |
12-09-2012, 12:35 AM | #5 |
Drives: 2012 ZL1 Join Date: May 2012
Location: Charles Town, W.V.
Posts: 64
|
INJECTORS are SOLD!!!
|
12-11-2012, 01:02 PM | #6 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: puyallup
Posts: 543
|
if only xmas didnt just zap my funds i would be snagging those headers and heat exchanger from you!
__________________
C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car
|
12-12-2012, 10:17 PM | #7 |
Drives: camaro Join Date: Jul 2011
Location: Uranus
Posts: 127
|
Why you sell the Z ? what size is the upper pully ?
__________________
-2000 camaro ss Lsx 427 Tf245 6 bolt Twin turbs. - 2015 C7 zo6 halltec Pulley headers- 2018 Zl1 a10 2650 maggie CSP headers big gulp 103mm
|
12-14-2012, 12:01 PM | #8 |
Drives: 2012 ZL1 Join Date: May 2012
Location: Charles Town, W.V.
Posts: 64
|
SOld the z for a few different reasons, upper pulley is a 2.5"
|
12-15-2012, 01:15 PM | #9 |
Drives: 2012 ZL1 Join Date: May 2012
Location: Charles Town, W.V.
Posts: 64
|
I have updated the list with parts that have been sold, Still have headers, intake, damper, lower pulley, extra resivor, and lights.....
|
12-16-2012, 08:26 PM | #10 |
Can you send me a pic of the cold air. Might be interested. Thanks
|
|
12-27-2012, 01:02 PM | #11 |
Account Suspended
|
interested in the intake. is that price shipped? send me a pm
|
12-27-2012, 02:12 PM | #12 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: puyallup
Posts: 543
|
do those headers with the catless pipes bolt into the stock exhaust?
__________________
C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car
|
12-30-2012, 12:10 PM | #13 |
Drives: 2012 ZL1 Join Date: May 2012
Location: Charles Town, W.V.
Posts: 64
|
All I have left is Damper with 10% lower pulley, Intake, and Victory Red oracle Sidemarker lights......
|
|
|
|
|