06-14-2014, 04:07 PM | #1 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
FS: 2 New C6/ZR1 18x9.5 +40mm replica wheels
I have 2 brand new C6 zr1 replica wheels for sale. They are 18x9.5 with a +40mm offset. Never been used. They are located in central ohio. Still have the box so I can ship them, weight is 64lbs for shipping quotes. Asking $360 plus shipping.
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
06-15-2014, 09:28 PM | #2 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
Bump for being from Ohio...moved from Dublin. Around the corner from you. Glws
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
06-20-2014, 12:44 PM | #3 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
Thanks. Bump for some drag wheels.
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
08-12-2014, 08:27 PM | #4 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
Bump it up. Who wants some new drag wheels?
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
08-13-2014, 11:30 AM | #5 |
Did they fit your ZL1?
__________________
|
|
08-13-2014, 11:57 AM | #6 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
They do. No spacer needed. However I never used them. Still in the box.
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
08-13-2014, 01:02 PM | #7 |
Ok, Any idea on what shipping would be to 46307? Not sure if it would be cheaper to drive.
__________________
|
|
08-13-2014, 01:31 PM | #8 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
Just looked it up on UPS and its right at $40 for ground shipping
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
08-13-2014, 02:49 PM | #9 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
I'd even be willing to pay half the shipping. So $380 and they are yours.
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
08-14-2014, 08:49 AM | #10 |
Ok, Thanks I will consider it.
__________________
|
|
08-15-2014, 12:20 PM | #11 |
Drives: cts-v Join Date: Aug 2014
Location: sebring, fl
Posts: 2
|
do you know if it will fit a ctsv sedan? I'm looking for drag wheels.
|
08-15-2014, 04:32 PM | #12 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
I have no idea.
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
08-15-2014, 07:59 PM | #13 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2010
Location: Westerville Ohio
Posts: 349
|
SOLD!!
__________________
2013 Camaro ZL1 Black M6
Roto-Fab Intake, Apex Catch Can, Stainless Works 2" long tube headers with cat delete, Stainless Works 3" retro chambered catback, ATI Super Damper with 10% overdrive lower pulley, tuned by JRE. Sitting on Black MRR 228's wrapped in MT's. |
|
|
|
|