NEW PRODUCT: Race Steering Hub Adapter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Proven Wicked · 02-22-2012, 04:45 AM

Proven Wicked is proud to introduce our steering wheel hub adapter.

If you are looking for a solution for replacing your factory steering wheel with a race steering wheel without permanent modifications we have what you need.

The 5th Generation Camaro has a very unique steering wheel mounting system so no adapter has been commercially available until now. It accepts most standard 6 bolt steering wheels. Its machined from billet 6061-T6 Aluminum and finished in a Type III black hard anodize. The splines are pressed in with a custom made broach taken from GM prints for the utmost in strength and accuracy.

Here you can see we used a Sparco steering wheel and their quick release adapter.

Let us know if you have any questions. Thanks.

MUSCLEIT · 02-23-2012, 01:34 PM

what about all the other stuff that was there air bag wires, and so on...

Proven Wicked · 02-23-2012, 08:50 PM

Quote:

Originally Posted by MUSCLEIT

what about all the other stuff that was there air bag wires, and so on...

The wiring for the steering wheel controls disconnect and the airbag wires tuck inside the adapter. You can view the full installation instructions on our site here.

There is no permanent modifications and the swap is real easy so switching for a race weekend is very simple to go back and forth. Let us know if you have any other questions. Thanks.

ZwartSS · 08-28-2013, 04:37 PM

Do you offer a quick release option?

Proven Wicked · 10-09-2013, 09:54 PM

Quote:

Originally Posted by ZwartSS

Do you offer a quick release option?

Yes, sure do! We designed the hub around the Sparco Quick Release hub (shown in picture above or better below) and has been on our car from day one.

Just got a batch of the hub adapters in today from anodize, but these have been hot and already half are spoken for so if you want a clean way of adding a race wheel to your Camaro we are the ONLY one offering an adapter.

Splat · 06-12-2015, 09:02 AM

Are these still available?

chevyss69 · 06-12-2015, 06:50 PM

Google it!!

Splat · 06-12-2015, 09:23 PM

Quote:

Originally Posted by chevyss69

Google it!!

I did, not all of theses product's are still available.

And thanks for your help.

ELIC1 · 06-13-2015, 10:19 AM

The wiring for the steering wheel controls disconnect and now you cant use them anymore please tell me this is not true

Proven Wicked · 07-09-2015, 05:40 PM

Correct the wiring for the factory steering wheel gets disconnected. Some of our costumers have custom wired in solutions for either the full controls on a separate panel or just for the horn.

These are now back in stock!

FKNGRSY · 07-11-2015, 03:11 AM

Edit* emailed instead

Z28LS7 · 07-24-2015, 07:28 PM

Any idea on how to wire the horn?

Lombardi · 09-10-2015, 06:19 PM

Is this still available?

Sent from my D6603 using Tapatalk

02-22-2012, 04:45 AM	#1
Proven Wicked Drives: 2010 Camaro 2SS/RS Join Date: Jan 2010 Location: Bismarck, ND Posts: 77	NEW PRODUCT: Race Steering Hub Adapter Proven Wicked is proud to introduce our steering wheel hub adapter. If you are looking for a solution for replacing your factory steering wheel with a race steering wheel without permanent modifications we have what you need. The 5th Generation Camaro has a very unique steering wheel mounting system so no adapter has been commercially available until now. It accepts most standard 6 bolt steering wheels. Its machined from billet 6061-T6 Aluminum and finished in a Type III black hard anodize. The splines are pressed in with a custom made broach taken from GM prints for the utmost in strength and accuracy. Here you can see we used a Sparco steering wheel and their quick release adapter. Let us know if you have any questions. Thanks.

02-23-2012, 01:34 PM	#2
MUSCLEIT Drives: 2010 REDLINE EDITION#46 Join Date: Feb 2011 Location: long island Posts: 578 View My Garage	what about all the other stuff that was there air bag wires, and so on... __________________ REDLINE MOTORSPORTS EDITIONMOTORSPORTS

06-12-2015, 09:02 AM	#6
Splat Drives: 2012 1SS M6 IOM Join Date: Dec 2012 Location: New Rochelle New York Posts: 1,428 View My Garage	Are these still available? __________________ 2012 1SS Camaro LS3 Inferno Orange Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018.

07-11-2015, 03:11 AM	#11
FKNGRSY Drives: 2014 1SS Join Date: May 2014 Location: Canada Posts: 158	Edit* emailed instead Last edited by FKNGRSY; 07-12-2015 at 11:24 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Add HUD to your 2010	2SSRS@Gen5diy	Camaro DIY & HOW-TO instructions & discussions	1993	03-30-2019 08:02 AM
Acronyms at C5	hokie2012	5th Gen Camaro SS LS LT General Discussions	34	08-10-2011 03:56 PM
SPEC Clutch/Flywheel Upgrades \| Single & Twin Disc!!	AJ@ECSMotorsports	Transmission / Driveline	21	11-13-2010 03:58 PM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 11:37 AM
Another new product from DSVcustoms... 2 Tone steering wheel	Indpowr	Cosmetics and Lighting Modification Discussions	11	05-25-2009 12:08 PM

08-28-2013, 04:37 PM	#4
ZwartSS Drives: All Black SS Join Date: Feb 2010 Location: N.A. Posts: 10	Do you offer a quick release option?

06-12-2015, 06:50 PM	#7
chevyss69 Drives: 2011 2ss/rs Join Date: Dec 2014 Location: hershey Posts: 162	Google it!!

06-13-2015, 10:19 AM	#9
ELIC1 Account Suspended Drives: black and silver Join Date: Apr 2014 Location: new york Posts: 1,728	The wiring for the steering wheel controls disconnect and now you cant use them anymore please tell me this is not true

07-09-2015, 05:40 PM	#10
Proven Wicked Drives: 2010 Camaro 2SS/RS Join Date: Jan 2010 Location: Bismarck, ND Posts: 77	Correct the wiring for the factory steering wheel gets disconnected. Some of our costumers have custom wired in solutions for either the full controls on a separate panel or just for the horn. These are now back in stock!

07-24-2015, 07:28 PM	#12
Z28LS7 Driver's Club AZ Drives: '14 HPE Z/28, '16 2SS convertible Join Date: Jul 2015 Location: AZ Posts: 42	Any idea on how to wire the horn?

09-10-2015, 06:19 PM	#13
Lombardi Drives: 2010 ABM Camaro 1LT Join Date: Jun 2012 Location: Waterbury Posts: 1,083	Is this still available? Sent from my D6603 using Tapatalk