Atlanta Club Lounge - Page 472 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hightower · 04-14-2012, 09:43 PM

Quote:

Originally Posted by ken53007

Oh wow that's sweet wish I could get my car on the cover or at least in it lol

Might be able to get into a magazine, what with a new-ish turbo kit and an IOM camaro. Catches eyes and ears pretty quickly if you ask me.

ken53007 · 04-14-2012, 10:03 PM

Quote:

Originally Posted by hightower

Might be able to get into a magazine, what with a new-ish turbo kit and an IOM camaro. Catches eyes and ears pretty quickly if you ask me.

thanks man! if that happens then i would have done everything i have wanted to do pretty much lol

Brolik10 · 04-15-2012, 05:42 AM

I'm sure you have to spend a minimun of 20k to be mentioned in a mag and another 10-15k to make the cover... That's a bed set fit for royalty Ken. LMAO
This bed situation will never die..

Brolik10 · 04-15-2012, 05:43 AM

Went and picked up a new TV today sooo the cam is on hold again LMAO

I knew it!!!

4SFEDSS · 04-15-2012, 06:02 AM

Quote:

Originally Posted by Brolik10

I'm sure you have to spend a minimun of 20k to be mentioned in a mag and another 10-15k to make the cover... That's a bed set fit for royalty Ken. LMAO
This bed situation will never die..

It must take more than that.

Brolik10 · 04-15-2012, 06:06 AM

Quote:

Originally Posted by 4SFEDSS

It must take more than that.

.

Wasnt you car in one of the mags??? lol I'm sure it must of been.

skip1718 · 04-15-2012, 07:20 AM

ken, you need to do a build thread on your bed. it seems like it get more press than the car.!!!!!.

dianeokie · 04-15-2012, 09:45 AM

Quote:

Originally Posted by skip1718

ken, you need to do a build thread on your bed. it seems like it get more press than the car.!!!!!.

I'm thinking of throwing up a poll about a trip up to the smokey mtns and some twisties. Maybe not tail of the dragon, but equally fun, less crowded. Any initial thoughts?

csjcsj · 04-15-2012, 09:47 AM

Ok! I took off my drivers side valve cover! No springs broke! Lol! But my question is, are your rocker arms suppose to move side to side! Some do some don't! But the movement from side to side is very minimal on the few that does!

Second question is what the heck is this or where did it come from! It's a tiny spring about and inch inch and a half long!

This was sitting in the bottom!

DarkFox1 · 04-15-2012, 10:23 AM

Quote:

Originally Posted by dianeokie

I'm thinking of throwing up a poll about a trip up to the smokey mtns and some twisties. Maybe not tail of the dragon, but equally fun, less crowded. Any initial thoughts?

count me out.

I'm sick of the flat tire factory. This is the 3rd time I've gotten a flat there.

edit: actually, gatlinburg is traffic hell. It makes atlanta look like liconlton traffic wise.

What about cherokee NC? It's in the mountains.. there's a big casino there for rooms.. (harrah's.)

ljustin293 · 04-15-2012, 10:35 AM

Quote:

Originally Posted by dirishboy

Did Thornton Chevy have a customer for the one they got?

yeah the ZL1 we got was sold.

Quote:

Originally Posted by ken53007

If the 5th gen wad not a Fbody then the fbody gathering would not have a camaro zl1 or a coop camaro this year so.....screw them if they can't take a joke

who has a copo camaro??

dirishboy · 04-15-2012, 10:51 AM

Great to see everyone today. Thanks again for coming out.

JLE58 · 04-15-2012, 10:55 AM

Quote:

Originally Posted by csjcsj

Ok! I took off my drivers side valve cover! No springs broke! Lol! But my question is, are your rocker arms suppose to move side to side! Some do some don't! But the movement from side to side is very minimal on the few that does!

Second question is what the heck is this or where did it come from! It's a tiny spring about and inch inch and a half long!

This was sitting in the bottom!

They will have some movement side to side if the valve is not open. You mean like a wiggle right?

ken53007 · 04-15-2012, 11:01 AM

Quote:

Originally Posted by skip1718

ken, you need to do a build thread on your bed. it seems like it get more press than the car.!!!!!.

Thanks man you want to be my agent you seem to have alot of good ideas

04-15-2012, 05:42 AM	#6597
Brolik10 BLOWN!!! Drives: 2010 RJT 2SS Join Date: Apr 2010 Location: Gwinnett, GA Posts: 1,103 View My Garage	I'm sure you have to spend a minimun of 20k to be mentioned in a mag and another 10-15k to make the cover... That's a bed set fit for royalty Ken. LMAO This bed situation will never die.. __________________ Blown! Full Bolt-ons!

04-15-2012, 05:43 AM	#6598
Brolik10 BLOWN!!! Drives: 2010 RJT 2SS Join Date: Apr 2010 Location: Gwinnett, GA Posts: 1,103 View My Garage	Went and picked up a new TV today sooo the cam is on hold again LMAO I knew it!!! __________________ Blown! Full Bolt-ons!

04-15-2012, 07:20 AM	#6601
skip1718 Drives: 2011 2SS green w/black rally strips Join Date: Feb 2011 Location: Loganville Posts: 196	ken, you need to do a build thread on your bed. it seems like it get more press than the car.!!!!!. __________________ 2011 2SS SGM M6 675 RWHP 618 TQ CAI air induction, ARH 1-7/8 Headers, high flow cats, X-pipe, Whipple Super Charger 10 lbs of boost Stage 3 blower cam and DMH cutouts vengeance EFI Live tune pfadt stage 2 suspension. Drop springs and sway bars Granatelli 1G suspension package RX Catch Can

04-15-2012, 09:47 AM	#6603
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	Ok! I took off my drivers side valve cover! No springs broke! Lol! But my question is, are your rocker arms suppose to move side to side! Some do some don't! But the movement from side to side is very minimal on the few that does! Second question is what the heck is this or where did it come from! It's a tiny spring about and inch inch and a half long! This was sitting in the bottom! __________________

04-15-2012, 10:51 AM	#6606
dirishboy as in Irish European Drives: 2012 ZL1 Join Date: May 2009 Location: Covington GA Posts: 403 View My Garage	Great to see everyone today. Thanks again for coming out. Attached Images __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM