12-13-2013, 07:21 AM | #1 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
Best DRL/Fog replacement bulbs?
I'm in need of new bulbs for my DRLs/Fogs. What is the best bulb that I can get. I'd like a white light that is bright (but does not melt the light assembly) and will last at least a year.
Also, I plan on rewiring them to a relay and to a switch inside of the car so that I can control them. Ideas? |
12-13-2013, 07:35 AM | #2 |
Drives: 2012 2SS RS Inferno Orange Join Date: Sep 2012
Location: Marlton, NJ
Posts: 398
|
Gen5diy.com will hook you up
__________________
|
12-13-2013, 08:15 AM | #3 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
|
12-13-2013, 10:07 AM | #4 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
What is the main difference between the PSX26W11 and the P13W bulbs? Is it merely the keying on the plug socket? Can I just order the PSX26W11 and modify it if the plug does not fit? The bulb will fit in the housing regardless will it not? It won't get too hot will it?
|
12-13-2013, 10:40 AM | #5 |
Drives: 2012 Camaro RS Join Date: Sep 2012
Location: Treasure Island, FL
Posts: 252
|
Hi jgray1978,
See below for a diagram that shows the difference between P13W and PSX26W. You can "force fit" a P13W into a PSX26W socket, but it won't fit quite right and you'll wish you bought the right type of bulb. We sell them as well. PM us if you can't find our sales thread in the External Parts and Accessories section of the Sponsor's Classified. Regards, --Keith |
12-13-2013, 11:05 AM | #6 | |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
Quote:
I found the diagram that you showed and I guess that I'll go pull apart the fender well and look. |
|
12-13-2013, 01:40 PM | #7 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
Are 11W bulbs good to use(vs. 7W or 6.5W)?
|
12-13-2013, 03:17 PM | #8 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
|
12-13-2013, 03:27 PM | #9 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
Thanks. I ordered some 11W ones on your site. It says that they sell in pairs. I assume that the $57 was for the pair.
|
12-13-2013, 03:35 PM | #10 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
|
12-17-2013, 06:04 AM | #11 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
Received the bulbs yesterday. Superb!
Now I want to wire them to a switch inside of the car. Does anyone have any suggestions on where I could get those plugs so that I don't have to cut the factory wiring? Also, any suggestions on a discrete switch? |
12-17-2013, 07:57 AM | #12 |
Moderator
|
I got some from Gen5DIY. The only reason they're not installed is that I'm waiting to finish my ABL install first.
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
|
|
|
|