My Maggie install......... - Page 69 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

redZ28 · 01-20-2011, 12:41 PM

Quote:

Originally Posted by PQ

I hope I didn't fry my ECU somehow. I had to interupt a transfer once. If it were bad I'd assume it would not transfer now but ya never know.

After I installed my Maggie, I drove it for 30 miles to Hennessey on the stock tune, and it drove normally. I never stomped the gas pedal, but I did drive it 70mph down the interstate. Therefore, your car should be able to run fine on the stock tune. I'll put my $1 bet on the ECU....but am hoping for a loose wire.

PQ · 01-20-2011, 12:54 PM

Quote:

Originally Posted by redZ28

After I installed my Maggie, I drove it for 30 miles to Hennessey on the stock tune, and it drove normally. I never stomped the gas pedal, but I did drive it 70mph down the interstate. Therefore, your car should be able to run fine on the stock tune. I'll put my $1 bet on the ECU....but am hoping for a loose wire.

What was your set-up. Was it similar to mine?

No cats, Long tubes, full exhaust, wide open intake?

redZ28 · 01-20-2011, 02:53 PM

Quote:

Originally Posted by PQ

What was your set-up. Was it similar to mine?

No cats, Long tubes, full exhaust, wide open intake?

No, I had no extras at that time, just the Maggie with a 3.6 pulley.

BlownSS · 01-20-2011, 02:59 PM

pq....if i send you a copy of my tune....will that work for you to try?

PQ · 01-20-2011, 03:02 PM

Quote:

Originally Posted by redZ28

No, I had no extras at that time, just the Maggie with a 3.6 pulley.

Sweet.

*GTAHVIT* · 01-20-2011, 03:03 PM

Quote:

Originally Posted by BlownSS

pq....if i send you a copy of my tune....will that work for you to try?

that may be worth a try....

Interesting.

BlownSS · 01-20-2011, 03:04 PM

it is a program from a renowned tuner.......it was basically uploaded to my predator tuner and then to the car. I kept a copy of the file here on my desktop.

Does anybody in his area have a predator to help him out with this?

I have the headers and high flow cats......6 speed....maggie with 3.6 pulley and CAI intake........ Kinda similar to what you have?

PQ · 01-20-2011, 03:10 PM

Mine is an auto tranny. :(

BlownSS · 01-20-2011, 03:12 PM

ahhhh...one would think. But....i got my tunes via email order from him. It has been checked by a local tuner and there were no changes that he would make to it. Anyways.....since I got them from him and then had to load them to the tuner, I have the file on my desktop and in my car!!!!! This allows me to take my tune anywhere anytime. I am not tied to the original tuner!

BlownSS · 01-20-2011, 03:13 PM

ha ha you said Tranny! This may not work for you then.

*Milk 1027* · 01-20-2011, 03:15 PM

Worth a shot, IMO

zebra · 01-20-2011, 03:17 PM

it'll at least idle... unless it's looking for a clutch position switch to start the engine

*GTAHVIT* · 01-20-2011, 03:19 PM

hrmph

Jax it is...

PQ · 01-20-2011, 03:22 PM

Quote:

Originally Posted by BlownSS

ha ha you said Tranny! This may not work for you then.

Might.

pq@althri.com

I won't use the tune but to only see if it helps. I"m dynoing it anyway, but it would be nice to know.

Quote:

Originally Posted by zebra

it'll at least idle... unless it's looking for a clutch position switch to start the engine

?

Quote:

Originally Posted by Milk 1027

Worth a shot, IMO

??

Quote:

Originally Posted by GTAHVIT

hrmph

Jax it is...

Either way............ ROOOOOOAAAAAAD TRIIIIIIIIIP............................

01-20-2011, 02:59 PM	#956
BlownSS Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Lincoln Nebraska Posts: 1,754	pq....if i send you a copy of my tune....will that work for you to try? __________________ 2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.

01-20-2011, 03:04 PM	#959
BlownSS Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Lincoln Nebraska Posts: 1,754	it is a program from a renowned tuner.......it was basically uploaded to my predator tuner and then to the car. I kept a copy of the file here on my desktop. Does anybody in his area have a predator to help him out with this? I have the headers and high flow cats......6 speed....maggie with 3.6 pulley and CAI intake........ Kinda similar to what you have? __________________ 2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.

01-20-2011, 03:10 PM	#960
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Mine is an auto tranny. :( __________________

01-20-2011, 03:12 PM	#961
BlownSS Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Lincoln Nebraska Posts: 1,754	ahhhh...one would think. But....i got my tunes via email order from him. It has been checked by a local tuner and there were no changes that he would make to it. Anyways.....since I got them from him and then had to load them to the tuner, I have the file on my desktop and in my car!!!!! This allows me to take my tune anywhere anytime. I am not tied to the original tuner! __________________ 2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.

01-20-2011, 03:13 PM	#962
BlownSS Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Lincoln Nebraska Posts: 1,754	ha ha you said Tranny! This may not work for you then. __________________ 2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.

01-20-2011, 03:15 PM	#963
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,567 View My Garage	Worth a shot, IMO __________________

01-20-2011, 03:17 PM	#964
zebra just can't seem to leave Drives: your mom wild!! Join Date: Oct 2008 Location: cold & windy Posts: 10,625 View My Garage	it'll at least idle... unless it's looking for a clutch position switch to start the engine __________________ Eve ('00 FRC): hot-air intake Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408

01-20-2011, 03:19 PM	#965
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,444 View My Garage	hrmph Jax it is... __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to get engine cover modified after a Maggie install?	1meanss	Cosmetics and Lighting Modification Discussions	5	03-05-2011 09:00 PM
Another Maggie install ....	Luvpilot	Forced Induction - V8	9	06-20-2010 09:00 PM
maggie install, hose routing suggestions please	n2oSS	Forced Induction - V8	6	05-31-2010 03:59 PM
DIY : Install catback on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	3	08-09-2009 04:36 PM