You are browsing camaro5 
 |
|
08-20-2012, 02:51 PM
|
#1 |
 Drives: 2010 1SS/RS M6 Join Date: May 2010
Location: Ontario
Posts: 115
|
Triangular trim piece beside mirror rattle
So for the longest time I thought it was my drivers side mirror that was rattling, turns out that it's the triangular trim piece that's on the door itself right beside the mirror. Attached is a picture of the piece that I'm talking about
Rather than taking it in for a day and dealing with the dealership, if I can then I'd like to fix it myself. Has anybody heard of this issue before or if they have any ideas how to stop the rattling? It seems to happen on 'sharp' bumps, like a sudden dip in the road or a sudden bump |
|
|
|
08-20-2012, 03:28 PM
|
#2 |
|
Banned
Drives: 2010 Camaro 2SS/RS Join Date: Jul 2009
Location: Sin City
Posts: 697
|
remove it and see if a snap is broken. It shouldn't be too much $ to replace it. Otherwise, a few small beads of silicone on the otherside should keep it in place..the silicone will be very easy to remove when necessary.
|
|
|
|
|
08-21-2012, 04:54 PM
|
#3 |
|
Drives: 2010 1SS/RS M6 Join Date: May 2010
Location: Ontario
Posts: 115
|
Does it just pop off?
|
|
|
|
|
08-24-2012, 03:00 PM
|
#4 |
|
Drives: 2010 1SS/RS M6 Join Date: May 2010
Location: Ontario
Posts: 115
|
bump
|
|
|
|
|
08-24-2012, 03:54 PM
|
#5 |
|
Banned
Drives: 2010 Camaro 2SS/RS Join Date: Jul 2009
Location: Sin City
Posts: 697
|
yes
|
|
|
|
|
|
|
|
 |
|
|
