1SS GUAGE INSTALL FROM A TO Z !! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1969to2010 · 12-02-2010, 10:47 PM

(FROM NY5THGEN.COM)

Shopped around for gauges for my car. To buy new, found it from GMpartsdirect although to find the cheap prices you need to go into the catalog which brings you to a separate website. The site is confusing and it seems a but shady to me but thats just my opinion the prices were super cheap shipping is very high though.There are plenty of options new if you shop around. Wound up finding the guages from a brother from the Camaro community. As people modify thier cars more and more parts like this will be available so I suggest checking the local market place and classifieds of the national and the local Camaro websites. After a lot of research and finally finding the right parts this was very simple. Im hoping to list every important aspect of the project here to make it easier for the next guy who runs into my problem.

FACTS:
1.) AUXILARY GAUGES FROM GM ARE JUST PLUG AND PLAY
2.) IF GAUGES ARE PURCHASED USED OUT OF A 2SS OR 2LT YOU WILL NEED TO USE THE HARNESS LISTED HERE OR HAVE A CUSTOM ONE MADE.
3.) THERE ARE TWO DIFFERENT PART #S FOR A6 AND M6 CARS parts list
4.) THESE DONT NEED TO BE ACTIVATED BY A DEALER

PARTS LIST:
SMALL PLASTIC PRY BAR
AUXILARY GUAGE CLUSTER
CONSOLE COVER A6
109139 Quad Pack Data Harness – 2010-2011 Camaro
available @
http://www.casperselectronics.com/store2/index.php

NOW JUST PUT IT BACK TOGETHER AND ENJOY !

FOR THOSE OF YOU WHO JUST GOT THE AUX GAUGES FROM GM THIS IS A BIT SIMPLER:

VERY SPECIAL THANKS TO KENDELL CHIN (DOC) MARK BOLT AND DARTH MARTEL, GOOD TO KNOW THERES STILL GOOD PEOPLE OUT THERE

Darth Martel · 12-03-2010, 06:36 AM

The harness looks good. Caspers does a good job.

Iwantone2 · 12-03-2010, 08:57 AM

Thanks for the write-up!!

calegarrison · 11-30-2011, 01:43 PM

easy enough

midnighter · 11-30-2011, 01:50 PM

I did the same on mine. I installed it in 20 minutes, it was easy. My switchblade silver door and dash inserts, now that's another story.

kuekio · 06-16-2015, 09:32 AM

Can I install a 4 Pack Gauge from a 2010 Camaro to a 2015 Camaro V6?
My 4 Pack gauges has the same harness of your photos. Or I have to get another kind of wire harness?
Thank you

2SSRS@Gen5diy · 06-16-2015, 11:35 AM

Quote:

Originally Posted by kuekio

Can I install a 4 Pack Gauge from a 2010 Camaro to a 2015 Camaro V6?
My 4 Pack gauges has the same harness of your photos. Or I have to get another kind of wire harness?
Thank you

The Gauges will work but you will need a harness that works for that year car.

Motorboy8769 · 07-01-2015, 10:35 PM

I talked to the dealer about installing mine before I pick my car up they said they have to cut and splice and it will void the warranty. So does anyone have a part number for the 4 pack that will plug and play for a 1ss? Thanks in advance

Quasimofo · 07-15-2015, 04:54 PM

Are these actually real gauges that show readings or just glorified idiot lights that just tell you when its too late...?

Because if they are real, I want 'em. If they are just idiot lights, I'll keep the space free.

1969to2010 · 07-24-2015, 08:51 AM

They Are real functioning gauges

Sent from my iPhone using Tapatalk

Jimmy Hot-Wheels · 08-23-2015, 10:21 PM

Quote:

Originally Posted by kuekio

Can I install a 4 Pack Gauge from a 2010 Camaro to a 2015 Camaro V6?
My 4 Pack gauges has the same harness of your photos. Or I have to get another kind of wire harness?
Thank you

I have pretty much the same question. I have a 4 pack gauge from a 2013 2SS that I want to install in my 2014 1SS.

There's a $34 harness from Southern Auto Parts http://www.southerncarparts.com/2010...ss-p-3743.html

Or a $79 harness from Gen5DIY
http://www.gen5diy.com/Chevrolet/Cam...-harnesss-pnp/

Or a $40 t-tap from Gen5DIY
http://www.gen5diy.com/Chevrolet/Cam...-harness-ttap/

Which do I need? Or something different???

12-02-2010, 10:47 PM	#1
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	1SS GUAGE INSTALL FROM A TO Z !! (FROM NY5THGEN.COM) Shopped around for gauges for my car. To buy new, found it from GMpartsdirect although to find the cheap prices you need to go into the catalog which brings you to a separate website. The site is confusing and it seems a but shady to me but thats just my opinion the prices were super cheap shipping is very high though.There are plenty of options new if you shop around. Wound up finding the guages from a brother from the Camaro community. As people modify thier cars more and more parts like this will be available so I suggest checking the local market place and classifieds of the national and the local Camaro websites. After a lot of research and finally finding the right parts this was very simple. Im hoping to list every important aspect of the project here to make it easier for the next guy who runs into my problem. FACTS: 1.) AUXILARY GAUGES FROM GM ARE JUST PLUG AND PLAY 2.) IF GAUGES ARE PURCHASED USED OUT OF A 2SS OR 2LT YOU WILL NEED TO USE THE HARNESS LISTED HERE OR HAVE A CUSTOM ONE MADE. 3.) THERE ARE TWO DIFFERENT PART #S FOR A6 AND M6 CARS parts list 4.) THESE DONT NEED TO BE ACTIVATED BY A DEALER PARTS LIST: SMALL PLASTIC PRY BAR AUXILARY GUAGE CLUSTER CONSOLE COVER A6 109139 Quad Pack Data Harness – 2010-2011 Camaro available @ http://www.casperselectronics.com/store2/index.php NOW JUST PUT IT BACK TOGETHER AND ENJOY ! FOR THOSE OF YOU WHO JUST GOT THE AUX GAUGES FROM GM THIS IS A BIT SIMPLER: VERY SPECIAL THANKS TO KENDELL CHIN (DOC) MARK BOLT AND DARTH MARTEL, GOOD TO KNOW THERES STILL GOOD PEOPLE OUT THERE __________________

12-03-2010, 08:57 AM	#3
Iwantone2 Voice Of The Voiceless Drives: CGM 1SS RS Join Date: Feb 2009 Location: OC Cali Posts: 9,617 View My Garage	Thanks for the write-up!! __________________

11-30-2011, 01:43 PM	#4
calegarrison Cale Garrison Drives: 2010 Synergy Green SE Camaro Join Date: Jun 2010 Location: Roosevelt, OK Posts: 294 View My Garage	easy enough __________________ *2010 SYNERGY GREEN SPECIAL EDITION* *22" Helo 844 Wheels* *5% Tint* *Blacked Out Taillights, Foglights, Sidemarkers Bowties , Taillight Bezels Reverse Lights* Synergy Green Matched G2 Brake Caliper Paint Magnetic Trunk Blackout AAC Lighting Replaced Factory Blue Interior LEDs with Green Black Gill Inserts Synergy Green Engine Cover and Fuse Box Vararam CAI with Green Air Filter** COMING SOON! ARH Longtube Headers MRT 2.0 Exhaust Trifecta Ghost Cam Synergy Green Heritage Grill T3 Flat Black Stripes Razzi Ground FX in SGM Lambo Doors STS Turbo SS Front Bumper with T2 Ports

06-16-2015, 09:32 AM	#6
kuekio Drives: 2015 Camaro 1LT RS Join Date: Mar 2015 Location: Orlando Posts: 12	How to install 4 Pack Gauge Can I install a 4 Pack Gauge from a 2010 Camaro to a 2015 Camaro V6? My 4 Pack gauges has the same harness of your photos. Or I have to get another kind of wire harness? Thank you

07-24-2015, 08:51 AM	#10
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	They Are real functioning gauges Sent from my iPhone using Tapatalk __________________

12-03-2010, 06:36 AM	#2
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	The harness looks good. Caspers does a good job.

11-30-2011, 01:50 PM	#5
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,906	I did the same on mine. I installed it in 20 minutes, it was easy. My switchblade silver door and dash inserts, now that's another story.

07-01-2015, 10:35 PM	#8
Motorboy8769 Drives: 2015 2ss Join Date: Jun 2015 Location: Wooster ohio Posts: 586	I talked to the dealer about installing mine before I pick my car up they said they have to cut and splice and it will void the warranty. So does anyone have a part number for the 4 pack that will plug and play for a 1ss? Thanks in advance

07-15-2015, 04:54 PM	#9
Quasimofo Drives: 2015 Z/28 Join Date: Jun 2015 Location: Chalfont, PA Posts: 67	Are these actually real gauges that show readings or just glorified idiot lights that just tell you when its too late...? Because if they are real, I want 'em. If they are just idiot lights, I'll keep the space free.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY : Install underdrive pulley on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	34	09-30-2013 08:25 PM
Anyone install steering controls on a 1SS???	AmericanV8	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	252	03-27-2010 11:25 AM
SS: 1SS and 2SS	The_Blur	5th Gen Camaro SS LS LT General Discussions	86	03-11-2010 11:12 PM
Order 1SS, 1SS RS, or 2SS RS ?	nl12	5th Gen Camaro SS LS LT General Discussions	26	01-03-2010 01:06 PM