Exhaust (flowmaster)??? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

xpanda305x · 03-24-2011, 09:53 PM

thats a v8 video not a v6 they sound completely different. and i heard an AT and no offense..i rather stick to my MRT1.0

chicagobulls · 03-24-2011, 10:06 PM

to me this exhaust sounds really quiet and also sounds similar to the stock exhaust

does it sound similar at all

also i want an exhaust that when i punch the gas i want it to be superloud

is this the case with this exhaust

also how loud is idle and how well does it rumble at idle

thanks for the help guys if you got a good deal let me know

chicagobulls · 03-24-2011, 10:09 PM

help

happycamper · 03-24-2011, 10:18 PM

Quote:

Originally Posted by chicagobulls

to me this exhaust sounds really quiet and also sounds similar to the stock exhaust

does it sound similar at all

also i want an exhaust that when i punch the gas i want it to be superloud

is this the case with this exhaust

also how loud is idle and how well does it rumble at idle

thanks for the help guys if you got a good deal let me know

I have the Flowmaster AT exhaust and the sound is nowhere close to the stock exhaust; it's much better. In my opinion, the biggest sound improvement is at idle and moderate rpms, especially inside the cabin, where it is much deeper than stock.
It won't be superloud when you punch the gas, and I wouldn't want that either.

Will@AdkinsPerformance · 03-24-2011, 10:20 PM

Quote:

Originally Posted by chicagobulls

help

We just put the Gibson axle back performance exhaust and it sounds deep and not over the top loud. It sounds excellent. So that's a good choice. MRT's are also a great and popular choice. Whatever direction you decide to go let me know and I'll be sure to get you the best price.

venice17517 · 03-24-2011, 10:29 PM

flowmaster

thorvath · 03-30-2011, 08:09 AM

I am new to camaro5 and recently purchased a new 2011 2LT RS. Does any1 have a sound clip of the new Borla axleback kit for the v6 camro? Borla Part #11776

I have heard a couple clips on youtube with the Pro-X series street mufflers and they sound great, but I think they require custom pipes...or so the Borla rep told me because they dont fit otherwise?

PoorMansCamaro · 03-30-2011, 08:15 AM

Quote:

Originally Posted by thorvath

I am new to camaro5 and recently purchased a new 2011 2LT RS. Does any1 have a sound clip of the new Borla axleback kit for the v6 camro? Borla Part #11776

I have heard a couple clips on youtube with the Pro-X series street mufflers and they sound great, but I think they require custom pipes...or so the Borla rep told me because they dont fit otherwise?

did you check this thread?

http://www.camaro5.com/forums/showthread.php?t=33104

if it's been posted on here, then it's probably in that thread.

VR Baron · 03-30-2011, 02:41 PM

I like my combo,but its the whole setup contributing to the overall mean sound

2010CamaroRS · 03-30-2011, 03:49 PM

down with soundclips....dont buy till you hear them all in person

OrangeFury · 03-30-2011, 06:15 PM

Yes, soundclips are basically worthless. Flowmaster AT simply cannot be beat on price, sound and look.

Kicknyoace · 03-30-2011, 08:58 PM

I got quoted $633 to buy/ install the Flowmasters for my V-6. The guy charges $140 for just an install so that sounds about right. Any different knowledge for a lower price on flowmasters?

thorvath · 04-12-2011, 07:13 PM

Thanks...i actually really wanna hear the borla touring exhaust on the camaro but i think its only out for the mustang v6 as of right now...ive been trying to get a hold of borla to ask them but i cant seem to get any1 one the phone to talk to..

Borla has 3 different set-ups for the v6 mustang so im guessing well be getting them sortly...anybody hear them yet?

KMPrenger · 04-12-2011, 07:37 PM

Quote:

Originally Posted by OrangeFury

Yes, soundclips are basically worthless. Flowmaster AT simply cannot be beat on price, sound and look.

I agree that in person is always best, but if your like me, and you don't know any other V6 owners in the area, and I'm pretty sure almost every one I've seen is bone stock, then you have to go by something.

In that case I'll take sound clips over just hoping it sounds good any day. On here, we can get two things...sound clip + peoples opinions = a very good thing.

Also, some sound capture devices just plain suck, while others are pretty good. In my case, the camera I used captured my sound pretty well, although it is a bit off at certain RPMs...so I consider it to be a good testimate to my setup. I'm sure some others are that way as well.

03-24-2011, 10:29 PM	#34
venice17517 Drives: 2010 Camaro Join Date: Jan 2010 Location: Lewistown PA Posts: 81 View My Garage	flowmaster __________________ K&N CAI Hurst Shifter Flowmaster AMT Exhaust

03-30-2011, 03:49 PM	#38
2010CamaroRS Driver of the Blue Demon Drives: '15 Jeep Grand Cherokee Limited Join Date: Jan 2010 Location: Westfield, MA Posts: 2,550 View My Garage	down with soundclips....dont buy till you hear them all in person __________________ New England Camaro 5 The Few, The Proud, The Hyper Blue Metallics DT shorties.BBK Intake.FlowMaster AT.Eibach 1'' drop.Hurst Short Throw (44% reduction).Unrestricted Motorsports Gen 1 Style Rear Spoiler.Custom Aqua Blue Metallic Interior Panels.RS Embroidered Head Rests.Interior LED by Oracle.Illuminated Bowtie by Oracle.Footwell LED by Oracle.Grille LED by Oracle.Functional Headliner Console Toggle Switches for LED Lighting.Aqua Blue Engine Cover.RotoFab Radiator Cover.Aqua Blue Fuse Box Cover from RPI Designs.Much More

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	3652	08-17-2023 02:50 PM
V8 Camaro Aftermarket Exhaust Video Clips Compilation	tjbusa	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	591	07-06-2022 08:38 AM
Thinking about going 2.5" the entire System	mike.nite	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	12	01-11-2011 03:57 PM
Custom Flowmaster exhaust	mikevrod	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	40	11-13-2009 10:38 AM
Flowmaster Exhaust System	NickB	V8 Bolt-Ons & Tunes	5	10-01-2009 09:04 AM

03-24-2011, 09:53 PM	#29
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	thats a v8 video not a v6 they sound completely different. and i heard an AT and no offense..i rather stick to my MRT1.0

03-24-2011, 10:06 PM	#30
chicagobulls one car wolfpack Drives: 2010 Camaro V6 Join Date: Nov 2010 Location: Illinois Posts: 1,226	to me this exhaust sounds really quiet and also sounds similar to the stock exhaust does it sound similar at all also i want an exhaust that when i punch the gas i want it to be superloud is this the case with this exhaust also how loud is idle and how well does it rumble at idle thanks for the help guys if you got a good deal let me know

03-24-2011, 10:09 PM	#31
chicagobulls one car wolfpack Drives: 2010 Camaro V6 Join Date: Nov 2010 Location: Illinois Posts: 1,226	help

03-30-2011, 08:09 AM	#35
thorvath Drives: 2011 Camaro 2LT RS - Summit White Join Date: Mar 2011 Location: New Jersey Posts: 6 View My Garage	I am new to camaro5 and recently purchased a new 2011 2LT RS. Does any1 have a sound clip of the new Borla axleback kit for the v6 camro? Borla Part #11776 I have heard a couple clips on youtube with the Pro-X series street mufflers and they sound great, but I think they require custom pipes...or so the Borla rep told me because they dont fit otherwise?

03-30-2011, 02:41 PM	#37
VR Baron SoCal Camaro5 Race Team Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010 Location: SO CAL Posts: 14,288	I like my combo,but its the whole setup contributing to the overall mean sound

03-30-2011, 06:15 PM	#39
OrangeFury Camaros Of Northwest Ohio Drives: 2010 IOM 1LT, 1974 Corvette Join Date: May 2010 Location: Toledo, OH Posts: 396	Yes, soundclips are basically worthless. Flowmaster AT simply cannot be beat on price, sound and look.

03-30-2011, 08:58 PM	#40
Kicknyoace Drives: 2013 Black 2LT/RS Join Date: Mar 2011 Location: Arlington, Tx Posts: 244	I got quoted $633 to buy/ install the Flowmasters for my V-6. The guy charges $140 for just an install so that sounds about right. Any different knowledge for a lower price on flowmasters?

04-12-2011, 07:13 PM	#41
thorvath Drives: 2011 Camaro 2LT RS - Summit White Join Date: Mar 2011 Location: New Jersey Posts: 6 View My Garage	Thanks...i actually really wanna hear the borla touring exhaust on the camaro but i think its only out for the mustang v6 as of right now...ive been trying to get a hold of borla to ask them but i cant seem to get any1 one the phone to talk to.. Borla has 3 different set-ups for the v6 mustang so im guessing well be getting them sortly...anybody hear them yet?