03-20-2018, 10:12 AM | #1 |
Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013
Location: Memphis, TN, to Brunswick, GA
Posts: 301
|
Bumper almost ripped off
Okay I have a problem , soo I recently pulled up apparently over the top of a curb at the end of a parking spot, it didn't scrape when I parked and I got out and looked and I had room, well when I left it snagged the front bumper and now the passenger side area around the blinker is sticking way out and it looks like the tabs are broken to hold it in place . Well then last week I went out to eat and it happened again ( bc I'm guessing the 3 bolts that hold the underneath onto the bumper brace weren't holding it on ) well this time when I was backing up it sounded like it was ripping the bumper off .now both sides are sticking out and I looked underneath and the 3 bolts are still in the frame but they were ripped outta the holes in the actual bumper .. the holes are way too big now . My question is , do I take the bumper off and try to line the sides back up or is that wasting my time, bc the 2 plastic clips are on the outside now , also will an SS bumper from a 2011 fit my v6 2012? I can get a black one locally. . . Thanks !
|
03-20-2018, 01:04 PM | #2 |
Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013
Location: Memphis, TN, to Brunswick, GA
Posts: 301
|
.
|
03-20-2018, 01:46 PM | #3 |
Drives: 2017 Chevy Sonic RS 1.4T Join Date: Sep 2017
Location: Riverview, Florida
Posts: 327
|
I don't know much but I do know that a SS bumper from 2010-2013 will fit any v6 from the same era
__________________
2015 Camaro RS/SS SIM LS3- Sold
2017 Sonic Mosaic Black RS 1.4T |
03-20-2018, 02:25 PM | #4 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
You could just get the replacement parts the mounts to the bumper cover with the 3-holes and nut inserts and fix your bumper.
|
03-20-2018, 02:34 PM | #5 |
Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013
Location: Memphis, TN, to Brunswick, GA
Posts: 301
|
I wasn't aware you could get bumper parts, I thought it was all attached to the bumper . I will have to look into that. Thanks man
|
03-20-2018, 03:00 PM | #6 |
Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,328
|
While looking for bumper parts you might want to look for some tires too.
__________________
|
03-20-2018, 03:03 PM | #7 |
Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013
Location: Memphis, TN, to Brunswick, GA
Posts: 301
|
Lol was waiting on someone to say that. I have new front ones in my garage . Should be getting put on tomorrow.
|
03-20-2018, 03:14 PM | #8 | |
Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,328
|
Quote:
Good luck.
__________________
|
|
03-20-2018, 08:28 PM | #9 |
Drives: 2010 Camaro 2SS Join Date: Sep 2015
Location: Richmond Hill ,Ontario, Canada
Posts: 780
|
Added a cheap front camera from ebay just for that reason. Mounted on the bottom side of my plate bracket. Get's used a few times a week on a regular basis.
|
03-20-2018, 10:37 PM | #10 |
Fish Poop Aficionado
|
I have a Brandmotion Curb-Alert. It works every time and saves my bumper numerous times a week.
__________________
|
|
|
|
|