11-13-2011, 12:23 PM | #1 |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
I need a catch can, maybe you do too.
2010 SS LS3 with about 4400 miles on it including a 1300 mile road trip and some hard autocross. I was on the fence about a catch can until I saw this.
First I notices this oil... Then more oil became evident. So I tried to get some pictures inside the manifold After I saw these I propped up the back of the manifold and took the next picture the next morning. So when I get back on the road next spring, I will have a catch can. Now what I want to know is what is the best way to get all this oil out of the manifold?
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein |
11-13-2011, 03:28 PM | #2 |
Drives: 2010 Camaro 2SS LS3 M6 Join Date: Oct 2011
Location: Dallas, TX
Posts: 159
|
Wow. I installed my catch can on Monday when mine had 5815 miles on it and it already has 3/4" in it. I'm sure my intake is just as nasty as yours... :(
__________________
__________________________
2010 2SS LS3 M6 Inferno Orange Metallic / Black |
11-13-2011, 03:40 PM | #3 |
086YN
Drives: Black 2SS/RS Demon of Madness Join Date: Aug 2011
Location: Conroe, Texas
Posts: 454
|
I am rapidly thinking about getting a quality catchcan now....
|
11-13-2011, 03:45 PM | #4 |
Drives: 2010 Camaro 2SS LS3 M6 Join Date: Oct 2011
Location: Dallas, TX
Posts: 159
|
Don't waste your time thinking about it. Just buy one and put it on... I wish it had put mine on the day I bought it.
__________________
__________________________
2010 2SS LS3 M6 Inferno Orange Metallic / Black |
11-13-2011, 03:52 PM | #5 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
I just empied mine out had about 1/4 full can...
|
11-13-2011, 03:54 PM | #6 |
086YN
Drives: Black 2SS/RS Demon of Madness Join Date: Aug 2011
Location: Conroe, Texas
Posts: 454
|
Well I said thinking because money. I am at 4100 miles right now and I don't like what I saw in the pics above. I also don't want to rob myself of power with oil being burned in my cylinders.
|
11-13-2011, 04:05 PM | #7 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
its not going to hurt anything it was designed for this to happen to get burned off, its just a nice to have and hopfully will keep the engine a little cleaner..
|
11-13-2011, 04:11 PM | #8 |
Drives: 2011 ss/rs Join Date: Sep 2010
Location: Fl
Posts: 146
|
oil in intake
|
11-13-2011, 04:12 PM | #9 |
086YN
Drives: Black 2SS/RS Demon of Madness Join Date: Aug 2011
Location: Conroe, Texas
Posts: 454
|
I keep reading on here about oil being burned in the chambers and it possibly causing detonation and pulling timing. Damnit I paid for the power and I don't want to be robbed by something as simple as a catch can......I want it ALLLLL. lol
What can did you get and how much was it? |
11-13-2011, 04:15 PM | #10 | ||
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
Quote:
Quote:
|
||
11-13-2011, 04:16 PM | #11 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
|
11-13-2011, 04:16 PM | #12 |
|
Damn Paul. That's a lot of oil.
Well, since you already have the manifold off, cleaning will be easy. I'd spray the hell out of it with simple green and grab an old toothbrush to get the stubborn stuff. Then thoroughly rinse. Let dry before reinstalling. |
11-13-2011, 04:17 PM | #13 | |
086YN
Drives: Black 2SS/RS Demon of Madness Join Date: Aug 2011
Location: Conroe, Texas
Posts: 454
|
Quote:
Edit:^^^ If you clean the filter and over oil = problem. We are talking about past the MAF Sensor into the part of your engine that really is the intake. Specifically about the PCV system (Positive Crankcase Ventilation) Not the Cold Air Intake.......I think that should be called cold air ducting.....look up an intake for a chevy 350 and you will see something like an edelbrock intake made of aluminum......just a pet peeve |
|
11-13-2011, 04:42 PM | #14 |
Drives: 2010 Camaro SS/RS Join Date: Oct 2011
Location: Wheat Ridge, Colorado
Posts: 246
|
Whats the best Catch Can for the L99 on the market? Im getting one now that I seen those pics..
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scrming's Rx Catch Can install & review | scrming | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 87 | 07-16-2015 06:29 PM |
Elite Engineering PCV Oil Catch Cans | Instock | Best Prices with Free Shipping! | JDP Motorsports | V8 Bolt-Ons & Tunes | 137 | 08-13-2014 03:06 PM |
*****Billet Oil Catch Cans!!!***** | DREV LSX | V8 Bolt-Ons & Tunes | 156 | 03-08-2012 03:46 PM |
Elite Engineering Catch Cans Now Available At APEX Motorsports! Multiple Colors! | Apex Motorsports | V8 Bolt-Ons & Tunes | 136 | 06-30-2011 05:24 AM |