Pics 305/35/20 Pirelli PZERO on Stock Wheels - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TaylorRyanSS · 11-26-2009, 09:05 PM

so a 305 on a 22x10.5 would fit pretty good then right? can you go to a 315 on 10.5 or would it stick out funny?

JJ2010 · 11-27-2009, 12:44 AM

Quote:

Originally Posted by Mike TexaSS

Its my car. All I did was post some pics of this tire on a stock rim. Period.

Its not like im offering a tire sale through G-Force.

How have these tires done for you and how many miles do you have on them?

JHart · 11-27-2009, 10:32 AM

i like that look. plus more sidewall protection. and being only 1/2 inch or so wider on each side, i don't think it'd matter, when my hankooks wear out, i'll probably go to this size tire.

Mike2ss · 11-28-2009, 12:04 AM

wow, they look great, I agree only .59 wider shouldn't make that much difference to handling.

Mike TexaSS · 11-28-2009, 01:04 AM

Been driving for months with zero issues!

MaroSS · 11-28-2009, 12:10 PM

So does the tire make the rims look more flush and pushed out or do you have spacers?

Mike TexaSS · 11-29-2009, 09:54 AM

No spacer stock 20x9 wheel.

I should have a set of forgestar 20x9 and 20x11's next week.

Mike2ss · 11-29-2009, 11:32 AM

Quote:

Originally Posted by Mike TexaSS

No spacer stock 20x9 wheel.

I should have a set of forgestar 20x9 and 20x11's next week.

Post a picture of the rims?

g-townmach · 11-29-2009, 06:17 PM

I freaking love it!! Saves up money for real parts.

And people, there is absolutely nothing wrong with a 305 on a 9inch rim. I ran 315 drag radials on my last two cobras (stock rims, 9in) and never one problem. About a million people have been issue-free as well. Yall are just girls.

NinoSS · 11-29-2009, 08:15 PM

Quote:

Originally Posted by g-townmach

I freaking love it!! Saves up money for real parts.

And people, there is absolutely nothing wrong with a 305 on a 9inch rim. I ran 315 drag radials on my last two cobras (stock rims, 9in) and never one problem. About a million people have been issue-free as well. Yall are just girls.

1sickss · 11-30-2009, 11:32 AM

Quote:

Originally Posted by COR Forged

side pics?

Gforce8 · 12-25-2009, 02:56 PM

How about pupping the 9" rims with the 275s on the front and getting the 8" front's widened to put on the rear with some nice 315s on them.
Minimum investment maximum width.
May need some spacers for the back though since the widening is usually done on the inside and does not affect offset correct?
At least in the back spacers are fairly safe since scrub radius is not affected like on the steering wheels.
Food for thought.

g-townmach · 12-25-2009, 03:05 PM

Quote:

Originally Posted by Gforce8

How about pupping the 9" rims with the 275s on the front and getting the 8" front's widened to put on the rear with some nice 315s on them.
Minimum investment maximum width.
May need some spacers for the back though since the widening is usually done on the inside and does not affect offset correct?
At least in the back spacers are fairly safe since scrub radius is not affected like on the steering wheels.
Food for thought.

Thats also called ackerman

fontenl · 12-26-2009, 02:29 PM

What do you guys think about 305-35-20 on the rear and 275-40-20 on the front of the stock 20"s?
I am thinking about the nitto invo's, from what i have been reading they run a little more narrow than the pirelli's. Please help!!!!

11-26-2009, 09:05 PM	#57
TaylorRyanSS COTW: 12/13/10 Drives: 1969 Camaro Join Date: Feb 2008 Location: Orange County, CA Posts: 7,880	so a 305 on a 22x10.5 would fit pretty good then right? can you go to a 315 on 10.5 or would it stick out funny? __________________ "Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make." 1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 \| FACEBOOK: http://www.facebook.com/taylor.ryan.apt \| GRAPHIC DESIGN: www.aptdesigns.net

11-27-2009, 10:32 AM	#59
JHart I haz camaro again :) Drives: 2010 Chevrolet Camaro 1SS Join Date: Mar 2009 Location: Union, South Carolina Posts: 660	i like that look. plus more sidewall protection. and being only 1/2 inch or so wider on each side, i don't think it'd matter, when my hankooks wear out, i'll probably go to this size tire. __________________ 2010 Camaro 1SS(back in a camaro again, yessssss!) 2010 silverado z71 ccsb(sold, old dd) 2010 camaro1ss(sold, missed, will have another someday)

11-28-2009, 12:10 PM	#62
MaroSS ZL1 Drives: 10' SS/RS - Sold; 15' White ZL1 Join Date: May 2009 Location: Harbor City, CA Posts: 683 View My Garage	So does the tire make the rims look more flush and pushed out or do you have spacers? __________________

11-29-2009, 06:17 PM	#65
g-townmach I FARTED Drives: 2010 2SS/RS Join Date: Nov 2009 Location: cen-tex Posts: 870	I freaking love it!! Saves up money for real parts. And people, there is absolutely nothing wrong with a 305 on a 9inch rim. I ran 315 drag radials on my last two cobras (stock rims, 9in) and never one problem. About a million people have been issue-free as well. Yall are just girls. __________________

12-25-2009, 02:56 PM	#68
Gforce8 WFO all the way Drives: Hyper Blue 2SS, Kalahari, 6 speed Join Date: Aug 2009 Location: Chicago, IL Posts: 367	How about pupping the 9" rims with the 275s on the front and getting the 8" front's widened to put on the rear with some nice 315s on them. Minimum investment maximum width. May need some spacers for the back though since the widening is usually done on the inside and does not affect offset correct? At least in the back spacers are fairly safe since scrub radius is not affected like on the steering wheels. Food for thought. __________________ 2016 2SS -no mods

11-28-2009, 12:04 AM	#60
Mike2ss Airborne Pathfinder Drives: Camaro ZL575 Join Date: Nov 2009 Location: San Benito, TX Posts: 1,139	wow, they look great, I agree only .59 wider shouldn't make that much difference to handling.

11-28-2009, 01:04 AM	#61
Mike TexaSS Drives: 454 LS7 Camaro SS Join Date: Jun 2009 Location: Houston Posts: 380	Been driving for months with zero issues!

11-29-2009, 09:54 AM	#63
Mike TexaSS Drives: 454 LS7 Camaro SS Join Date: Jun 2009 Location: Houston Posts: 380	No spacer stock 20x9 wheel. I should have a set of forgestar 20x9 and 20x11's next week.

12-26-2009, 02:29 PM	#70
fontenl Drives: chevrolet camaro ss Ls3 Join Date: Aug 2009 Location: baton rouge Posts: 28	What do you guys think about 305-35-20 on the rear and 275-40-20 on the front of the stock 20"s? I am thinking about the nitto invo's, from what i have been reading they run a little more narrow than the pirelli's. Please help!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need good pics of Midnight Silver RS wheels.	Mike TexaSS	Wheels and Tires Talk Sponsored by The Tire Rack	7	08-03-2012 11:48 AM
looking for pics of black Camaro with midnight silver wheels	jdcueto	Camaro Photos \| Spyshots \| Video \| Media Gallery	9	06-22-2009 04:29 PM
need pics of black/black2ss/rs with 21inch wheels	Jdh02	Camaro Photos \| Spyshots \| Video \| Media Gallery	6	05-17-2009 04:38 PM
Pics of all factory wheels on real cars, except the steelies.	bret03	Wheels and Tires Talk Sponsored by The Tire Rack	28	01-16-2009 05:11 PM