Oil Pressure gauge stuck at 70 PSI - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Zeuqzav · 01-31-2023, 01:18 PM

Hello everyone, I have this issue I would like to know more about

I have a 2011 2LT with RS package, everything was going fine until on 01/27/23 I noticed the oil pressure gauge in the instrument cluster was stuck at 70 PSI. I notice no difference when driving, no knocking or hesitation whatsoever. When I start the car the cluster and all the gauges do the normal check (needle from left-right-left) but the PSI is the only one that inmediately goes to the far right and stays there. Last thing done to the car was changing the DRL´s bulbs to LED and connected them to the headlights so both turn on at the same time, this was done four days before this issue came up. Service interval has been every 6 to 8 months, no CEL on.

Could anyone help me find out if need to do something else or how to fix this issue? Thanks!

01-31-2023, 01:18 PM	#1
Zeuqzav Drives: 2011 2LT Camaro RS Join Date: Jan 2023 Location: Mex Posts: 1	Oil Pressure gauge stuck at 70 PSI Hello everyone, I have this issue I would like to know more about I have a 2011 2LT with RS package, everything was going fine until on 01/27/23 I noticed the oil pressure gauge in the instrument cluster was stuck at 70 PSI. I notice no difference when driving, no knocking or hesitation whatsoever. When I start the car the cluster and all the gauges do the normal check (needle from left-right-left) but the PSI is the only one that inmediately goes to the far right and stays there. Last thing done to the car was changing the DRL´s bulbs to LED and connected them to the headlights so both turn on at the same time, this was done four days before this issue came up. Service interval has been every 6 to 8 months, no CEL on. Could anyone help me find out if need to do something else or how to fix this issue? Thanks! Last edited by Zeuqzav; 01-31-2023 at 10:34 PM. Reason: Added more info