02-10-2014, 05:15 AM | #1 |
Drives: 2010 camaro SS/RS Join Date: Dec 2012
Location: swaffham UK
Posts: 370
|
V3si and SLP ud pulley ?
Just picked up a vortech v3si kit. I currently have an SLP UD pulley. Can I run rhe UD pulley with the supercharger. Only reason I ask is im probably going to have to tune it myself, as there isn't anyone in england . And using the UD crank pulley with the stock vortech head unit pulley should bring boost down to about 3 PSI. And then swop to the ATI damper/pulley when I get the tune closer and I have cash for the fuel system
|
02-10-2014, 06:23 AM | #2 |
Sorry no. The crank pulley on the Vortech setup is made to bolt up to the ATI damper/pulley. But on a side note you will be happy to know the ATI damper/pulley that comes with the kit is a Underdrive !
Edit: The belt the runs the Vortech is a dedicated 10rib belt it does not run the accessories your stock belt stays on the car and runs them. |
|
|
|
|
|