You are browsing camaro5 
 |
|
12-04-2012, 05:05 PM
|
#1 |
 
Drives: 2012 2LT Black (Vengeance) Join Date: Mar 2010
Location: pa
Posts: 637
|
Removing the Chevy badge from the V6 engine cover
Has anyone done this without damaging the Chevy logo badge?
Thanks |
|
|
|
12-04-2012, 05:23 PM
|
#2 |
|
NewDivide
Drives: SW '13 1SS/RS & '12 Honda CRV Join Date: Jan 2011
Location: South East, Mass
Posts: 921
|
Yeh, make sure you put something like painters tape around the perimeter so not to scratch the cover, then use a small thin blade screwdriver and pry it up a bit. Then peel it off. Very thin metal, almost like beer can material. Comes off pretty easy.
__________________
 |
|
|
|
|
12-04-2012, 06:12 PM
|
#3 |
    
Drives: 2012 Camaro 2LT RS Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,633
|
I did the same as Divide did, but I used a heat gun on low setting and got the plastic warmed up a bit and it worked very well.
|
|
|
|
|
12-04-2012, 06:25 PM
|
#4 |
|
Got mine!
Drives: 2021 LT1 RS - Orange Crush Join Date: Mar 2011
Location: Fallbrook, CA
Posts: 1,297
|
What do you replace it with?
|
|
|
|
12-04-2012, 07:52 PM
|
#5 |
|
Drives: 2012 2LT Black (Vengeance) Join Date: Mar 2010
Location: pa
Posts: 637
|
Not replace but repaint...
|
|
|
|
|
|
|
|
 |
|
|
