07-25-2011, 09:23 PM | #1 |
Jan
Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010
Location: Springfield, TN
Posts: 16,225
|
Seat broken- anyone else have this problem?
So I get in my car to leave town after Somernights Powercrusie & notice the side of my seat does not look right. Once we get home closer inspection reveals a plastic tab on the inside of the plastic side piece upon which the seat adjusters are attached, is broken. This tab appears to have been hooked onto a metal piece on the seat holding the plastic part sungly against the side of the cloth seat. (see pics - sorry close up pics would not focus well. I include a pic of the other seat to show the difference) I'm guessing when I was not looking some (insert ugly word) car show attendee got in my car & upon getting out some part of their clothing got hooked on that plastic piece pulling & breaking it. Grrrrrrrrrrrrrrrrrr!!!!!!! Okay, that makes me mad, but it is under warranty so I'll just get it fixed. Has anyone else had a problem like this? Can just the side piece be replaced or will I have to have a new seat?
__________________
|
07-25-2011, 09:46 PM | #2 |
Supercharged
|
My driver's seat has done that too!
__________________
2SS/RS IBM A6, White Rallies
Ordered: 4/30/09 Delivered: 8/18/09 Appearance Mods: Heritage Grille, ZL1 Replica Wheels Performance Mods: Flowmaster ARH Cat-Back Exhaust, ADM CAI, ADM L99-LS3 Conversion, ADM LSA Supercharger Kit, Lingenfelter GT9 Cam, Stainless Power Headers, Detroit Speed Sway Bars, ZL1 Fuel Pump 581 rwhp/535 lb/ft tq |
07-25-2011, 10:04 PM | #3 |
Jan
Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010
Location: Springfield, TN
Posts: 16,225
|
Did you take it in to be fixed?
__________________
|
07-25-2011, 10:06 PM | #4 |
"To Punish And Enslave"
Drives: B E RS GBA #72541 3564 CC 220 CI Join Date: May 2011
Location: massachusetts
Posts: 3,889
|
__________________
C.A.M.A.R.O- Constantly Adding Modifications Addiction Relentless Obsession 90% canadian 10% mexican 100% american muscle :flag2: |
07-25-2011, 11:43 PM | #5 | |
IN THE CIRCLE
|
Quote:
Wow |
|
07-26-2011, 08:55 AM | #6 |
Drives: Aqua Blue Metallic 2SS/RS Join Date: Jan 2010
Location: Leominster, Massachusetts
Posts: 54
|
Mine is doing the same thing. I'm thinking of taking it in.....
|
07-26-2011, 09:40 AM | #7 |
I wanna go fast!!
Drives: 2010 Camaro 1LT RS Package Join Date: Jun 2011
Location: Savannah, GA
Posts: 24
|
Wow... I was going to post the same thing, until i saw this... My car has the same thing. Will make an appointment for next week.
|
07-26-2011, 11:14 AM | #8 |
Jan
Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010
Location: Springfield, TN
Posts: 16,225
|
I tried to look to see if there was a recall or a TSB about it but could not find anything. I will put a response on that thread to see if I get any further info.
__________________
|
07-26-2011, 11:38 AM | #9 |
Drives: 2014 1LE & 2014 C7 Join Date: May 2011
Location: DFW
Posts: 742
|
This happened on the car I traded for my Camaro (07 Cadillac STS-V) it sat low too only happened when somebody rolled/slides off the seat to get out instead of lifting themselves up off the seat to get out the plastic side can't handle the pressure of weight I guess and the plastic trim piece would pop out I would look after anyone rode passenger side after they got out sometimes it happened some not I had to pop it back in it was very frustrating
|
08-10-2011, 09:57 AM | #10 |
Drives: IOM 2SS/RS & 2014 Mustang GT 5.0 Join Date: Jul 2009
Location: Palm Bay, FL
Posts: 83
|
Mine was replaced under warr.
|
08-10-2011, 01:11 PM | #11 |
Black Ice
Drives: 2SS/RS Black w/ silver ice stripes Join Date: Jul 2009
Location: Pueblo,Co.
Posts: 898
|
Mine was replaced too under warrenty. They already have an updated part for it too.
__________________
|
08-10-2011, 01:14 PM | #12 |
NorCalCamaros.com
|
Not that problem but my seat belt makes a darn squeeking noise all the time right where it clicks in...
JASON |
08-12-2011, 08:22 PM | #13 |
Drives: 2010 2SS?RS Imperial Blue Join Date: Feb 2011
Location: Rio Rancho NM
Posts: 3
|
Seat
I have 2010 and the drivers seat did the same last year and they said they fixed it. It is now the same the plastic keeper on the front of the seat which holds the entire front of the seat material to the frame comes loose. Took it in today I was told that there was a TSB for the seats but I cant find one out there. Does anyone know of the TSB? I dont want them hod ringing it to the frame or some stupid fix.
|
08-12-2011, 08:36 PM | #14 |
Drives: 2012 GMC Sierra Z71 4x4 Crew Join Date: Feb 2010
Location: San Antonio, Tx
Posts: 1,229
|
Happens to my drivers side, dealer replaced, all good
__________________
MBRP 3" CAT BACK, SLP SKIP SHIFT, COLD AIR INDUCTIONS INTAKE, INJEN PRE FILTER,
AAC LED PODS, CUSTOM COACH WORKS PAINT,PFADT LOWERING SPRINGS AND SWAY BARS, MRR HR-6 WHEELS, RPI DESIGNS C-6 HIGH RISE SPOILER(AKA RK SPORT 3 PIECE SPOILER) |
|
|
Tags |
wrong subforum |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Door Panels/ Seat Covers NO PICS YET... | NOT URSS | Interior Parts & Accessories | 26 | 04-05-2011 09:15 PM |
Troubleshooting help........ possible car problem....... vibration....... | PQ | Wheels and Tires Talk Sponsored by The Tire Rack | 234 | 12-17-2010 04:01 PM |
Fitting a baby seat in the back of the Camaro | monstertodd | 5th Gen Camaro SS LS LT General Discussions | 14 | 07-06-2010 08:41 AM |
Is this an electrical/Engine/? problem im having? | xpanda305x | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 7 | 05-22-2010 10:49 PM |
Electrical problem or engine i dont know. please help me! | xpanda305x | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 1 | 05-22-2010 02:50 PM |