[VR] Bolt On 6th Gen ZL1 makes 692rwhp!!!

David@Vengeance · 04-03-2018, 12:59 PM

It seemed like ZL1 month here at Vengeance Racing. With the reputation of this amazing and capable Camaro we have had many customers looking to modify their 6th Gen ZL1’s. Chris recently had his beautiful white ZL1 transported to us all the way from Florida for a complete bolt-on performance package. Chris had already installed a Cold Air intake on his ZL1 and was looking to wake the LT4 up further. For his build we went with the following:

• Kooks 1 7/8” Longtube Header System w GREEN catted Conn Pipe
• Vengeance Racing High Temp Spark Plug wire isolators
• ATI Balancer Kit for LT4
• Lingenfelter 9.17” 18% Pulley
• Vengeance Racing Flex Fuel Sensor Kit
• 180* Thermostat

Chris wanted a louder tone out of his exhaust so we decided to run the Kooks 1 7/8” Headers with a “GREEN” Catted Connection pipe per his request. With this we added our Vengeance Racing high temp spark plug wire insulators to protect his plug wires from the added heat. From there we added ATI’s Balancer kit along with Lingenfelter’s 9.17” Pulley to increase boost on the LT4 supercharger.

Chris was looking to run both pump gas and E85 so we added our Vengeance Racing Flex Fuel Sensor Kit. Unfortunately the OEM fuel system will not allow you to run 100% E85 at this power level, so we utilized a 50/50 mix to satisfy his performance goals while still taking advantage of the E85 fuel. With the car buttoned up it was time to head over to our chassis dyno for final tuning. On pump gas, Chris’ ZL1 made 646rwhp and 719rwtq and on 50% E85 the ZL1 made 692rwhp and 750rwtq. These were excellent results for these few modifications and Chris was blown away by the night and day difference in the cars performance with like-stock drivability.

Check out more of our Feature Builds, Performance Packages and Products at our website https://vengeanceracing.net/index.html. We have a wide range of performance parts on our online store for your LS or LT build. Feel free to contact us with any questions at Sales@VengeanceRacing.net or by phone @ 678-513-7105. We look forward to hearing from you.

And as always be sure to Like, Follow and Subscribe to Vengeance Racing on Social Media.
FaceBook @ Vengeance Racing
Instagram @ Vengeance Racing
YouTube @ Ronatvengeance

ShizzySupra · 04-03-2018, 01:16 PM

Auto or manual?

7WSM · 04-03-2018, 01:29 PM

Looks like a A10 from the underneath veh picture.

That's some impressive power out of some very basic mods. Great job at the guys at Vengeance!

David@Vengeance · 04-03-2018, 03:52 PM

Quote:

Originally Posted by ShizzySupra

Auto or manual?

A10

Quote:

Originally Posted by 7WSM

Looks like a A10 from the underneath veh picture.

That's some impressive power out of some very basic mods. Great job at the guys at Vengeance!

It definitely is! Thank you for the kind words we appreciate all the support.

VAZL1 · 04-03-2018, 04:50 PM

Dave PM me a price for the following:

American Racing Headers and X-pipe with green catt
• Vengeance Racing High Temp Spark Plug wire isolators
• ATI Balancer Kit for LT4
• Lingenfelter 9.17” 18% Pulley
• 180* Thermostat

2017 ZL1 6M CAI and Katech ported TB already installed

David@Vengeance · 04-05-2018, 06:34 AM

Quote:

Originally Posted by VAZL1

Dave PM me a price for the following:

American Racing Headers and X-pipe with green catt
• Vengeance Racing High Temp Spark Plug wire isolators
• ATI Balancer Kit for LT4
• Lingenfelter 9.17” 18% Pulley
• 180* Thermostat

2017 ZL1 6M CAI and Katech ported TB already installed

Can you shoot me an e-mail at David@vengeanceracing.net on this please? The forum PM's get tough to keep up with and I can better attach a detailed PDF estimate to an e-mail for you to review.

VAZL1 · 04-06-2018, 05:52 PM

Quote:

Originally Posted by David@Vengeance

Can you shoot me an e-mail at David@vengeanceracing.net on this please? The forum PM's get tough to keep up with and I can better attach a detailed PDF estimate to an e-mail for you to review.

Will do!

Hard Parker · 04-06-2018, 07:25 PM

O_0

chicagosam · 04-06-2018, 07:48 PM

Dave
Where'd that hood graphic come from? It looks great.

Want1 · 04-07-2018, 10:02 AM

NICE!

Cmyskill · 04-24-2018, 03:22 PM

I am doing the same setup and was wondering what the plug gap on the new plugs will be? I have ordered most of the parts from Vengeance and about ready for the install.

D3adch1ld · 02-28-2020, 10:15 PM

Quote:

Originally Posted by Cmyskill

I am doing the same setup and was wondering what the plug gap on the new plugs will be? I have ordered most of the parts from Vengeance and about ready for the install.

Was this ever answered?

laynlo15 · 02-29-2020, 06:48 AM

Nice job Dave.

DorkMissile · 03-02-2020, 07:36 AM

Quote:

Originally Posted by D3adch1ld

Was this ever answered?

If it is of any help - the gap is kind of determined by how much boost you are running because the added boost can kind of "blow out" the spark

Unless you are running 20lbs or more, .021" - .023" on E85 with heat range #7 plugs (I run LTR7IX at .022" on 12lbs with no issues) will be just fine

I would highly recommend the NGK plugs

04-03-2018, 12:59 PM	#1
David@Vengeance Drives: 2017 Camaro SS 1LE Join Date: Nov 2013 Location: Cumming, GA Posts: 299	[VR] Bolt On 6th Gen ZL1 makes 692rwhp!!! It seemed like ZL1 month here at Vengeance Racing. With the reputation of this amazing and capable Camaro we have had many customers looking to modify their 6th Gen ZL1’s. Chris recently had his beautiful white ZL1 transported to us all the way from Florida for a complete bolt-on performance package. Chris had already installed a Cold Air intake on his ZL1 and was looking to wake the LT4 up further. For his build we went with the following: • Kooks 1 7/8” Longtube Header System w GREEN catted Conn Pipe • Vengeance Racing High Temp Spark Plug wire isolators • ATI Balancer Kit for LT4 • Lingenfelter 9.17” 18% Pulley • Vengeance Racing Flex Fuel Sensor Kit • 180* Thermostat Chris wanted a louder tone out of his exhaust so we decided to run the Kooks 1 7/8” Headers with a “GREEN” Catted Connection pipe per his request. With this we added our Vengeance Racing high temp spark plug wire insulators to protect his plug wires from the added heat. From there we added ATI’s Balancer kit along with Lingenfelter’s 9.17” Pulley to increase boost on the LT4 supercharger. Chris was looking to run both pump gas and E85 so we added our Vengeance Racing Flex Fuel Sensor Kit. Unfortunately the OEM fuel system will not allow you to run 100% E85 at this power level, so we utilized a 50/50 mix to satisfy his performance goals while still taking advantage of the E85 fuel. With the car buttoned up it was time to head over to our chassis dyno for final tuning. On pump gas, Chris’ ZL1 made 646rwhp and 719rwtq and on 50% E85 the ZL1 made 692rwhp and 750rwtq. These were excellent results for these few modifications and Chris was blown away by the night and day difference in the cars performance with like-stock drivability. Check out more of our Feature Builds, Performance Packages and Products at our website https://vengeanceracing.net/index.html. We have a wide range of performance parts on our online store for your LS or LT build. Feel free to contact us with any questions at Sales@VengeanceRacing.net or by phone @ 678-513-7105. We look forward to hearing from you. And as always be sure to Like, Follow and Subscribe to Vengeance Racing on Social Media. FaceBook @ Vengeance Racing Instagram @ Vengeance Racing YouTube @ Ronatvengeance

04-03-2018, 01:16 PM	#2
ShizzySupra Drives: 16' Camaro 2SS Join Date: Sep 2015 Location: Oregon Posts: 381	Auto or manual? __________________ @DeathWatchCamaro on Insta 993whp Magnuson 2.3R 9.5 @ 145, Magnuson 2300, Full Weight 2SS, 17’s (810whp)

04-03-2018, 04:50 PM	#5
VAZL1 Drives: 17 ZL1 Join Date: Mar 2017 Location: VA Posts: 1,075	Dave PM me a price for the following: American Racing Headers and X-pipe with green catt • Vengeance Racing High Temp Spark Plug wire isolators • ATI Balancer Kit for LT4 • Lingenfelter 9.17” 18% Pulley • 180* Thermostat 2017 ZL1 6M CAI and Katech ported TB already installed __________________ 2017 ZL1 Coupe M6, Red Hot Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp

04-06-2018, 07:25 PM	#8
Hard Parker OMWTFYB Drives: ZL1 Join Date: Sep 2011 Location: Phoenix Posts: 1,523	O_0 __________________ 2017 Camaro 1LE Nightfall Gray Metallic RIP ☠️☠️☠️ 2017 Camaro ZL1 Black Exposed CF\|Sunroof\|6 Speed Click HERE to follow my build!! Click HERE to follow me on Instagram #savethemanuals

04-06-2018, 07:48 PM	#9
chicagosam Drives: 2017 BLACK ZL1 A10 Join Date: Jan 2018 Location: Chicago Posts: 109	Dave Where'd that hood graphic come from? It looks great. __________________ '17 Mosaic ZL1 Katech TB, Plugs/Wires, Rotofab Oiled,+18% Lower, 2" Headers, Cat Delete, 93 Tune, Mobil 1, IPA FF04, 315/30/20 r888r, 664hp/693tq (93), 702hp/727tq (100 oct)

04-03-2018, 01:29 PM	#3
7WSM Drives: 2017 ZL1 A10 Join Date: Nov 2009 Location: Pearland, TX Posts: 465	Looks like a A10 from the underneath veh picture. That's some impressive power out of some very basic mods. Great job at the guys at Vengeance!

04-07-2018, 10:02 AM	#10
Want1 Drives: 2017 Camaro SS 1LE Join Date: Jul 2017 Location: Phoenix, AZ Posts: 127	NICE!

04-24-2018, 03:22 PM	#11
Cmyskill 17 ZL1 what a car.... Drives: 2021 M S PLAID, 2017 ZL1 A10 White Join Date: Apr 2008 Location: Port St Lucie FLORIDA Posts: 428	I am doing the same setup and was wondering what the plug gap on the new plugs will be? I have ordered most of the parts from Vengeance and about ready for the install. __________________ 2017 ZL1 -- WHT - A10 - PDR - NAV Mods: Kooks 2", Lingenfelter 9.17” 18% Pulley, CAI, E85 sensor, and Interceptor Wide-band & Gauge with Pod, 180 Thermostat, BMR Rear suspension parts.

02-29-2020, 06:48 AM	#13
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Nice job Dave. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

User Name		Remember Me?
Password