10-10-2014, 01:41 PM | #1 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Anybody know how to install this badboy..??
How can put this in.. so excited. .
__________________
|
10-10-2014, 01:42 PM | #2 |
redleader
|
Start unscrewing the rear centre console ...
|
10-10-2014, 01:44 PM | #3 |
redleader
|
Anybody know how to install this badboy..??
http://www.*************/forum/viewt...hp?f=17&t=1539
bowtie v6 dot com is the missing part without the spaces |
10-10-2014, 01:48 PM | #4 |
redleader
|
|
10-10-2014, 02:12 PM | #5 | |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Quote:
__________________
|
|
10-10-2014, 02:28 PM | #6 |
Do somethin fun every day
|
When I did mine I used my existing pivot arms, kept them in place and just unscrewed the 8 Phillips screws from both the new cover and the old cover and swapped them out. So I just replaced the top basically. Simple. Looking for pics...here this shows it very well:
http://www.camaro5.com/forums/showth...ole+lid+remove First post, second picture, the piece on the left does not get removed, that is the original piece that you use, the piece on the right is the top part that comes off with the 8 screws and voila, swap! The post is a custom like mine but the simple, much easier install will still apply.
__________________
Last edited by djcfuzz; 10-10-2014 at 02:59 PM. Reason: Add link & description |
10-10-2014, 02:59 PM | #7 | |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Quote:
__________________
|
|
10-10-2014, 03:08 PM | #8 |
Do somethin fun every day
|
I originally said left...left in my above post. I meant left...right, updated. Looking forward to posted pics.
__________________
|
10-10-2014, 05:35 PM | #9 |
Do somethin fun every day
|
^ Yeah, I believe those are the steps I described above.
__________________
|
10-10-2014, 05:39 PM | #10 |
The Stealth Bumblebee
Drives: Black 2013 2LS Join Date: Aug 2013
Location: SW of Houston
Posts: 1,385
|
Yeah I replaced that nasty nerf arm rest with one of those.
I just removed the screws separating the top and bottom piece on both contraptions. I got the genuine GM one and it won't click shut as smoothly as the stock. There must be something with the thickness of the leather that causes that. Hmmm, maybe the leather one has a bottom piece that is sunk 1/16 inch lower to account for that. Hmmm maybe you should take the console apart. :-(
__________________
KILLER BEE
|
10-10-2014, 07:23 PM | #11 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Done deal guys.. love it..
__________________
|
10-10-2014, 10:29 PM | #12 |
Do somethin fun every day
|
Looks much better.
__________________
|
10-12-2014, 02:30 AM | #13 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
__________________
|
10-13-2014, 07:43 PM | #14 |
Drives: 2014 chevy camaro 2lt RS Join Date: Nov 2013
Location: virginia beach, va
Posts: 241
|
looks good sir , glad it helped you out ...
__________________
GMG1(SW) usn ret Battleship sailor
|
|
|
Thread Tools | |
|
|