12-17-2013, 08:05 PM | #1 |
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
Need exhaust experts opinion
this is another thread http://www.camaro5.com/forums/showthread.php?t=332765and was wandering if this was repairable, or can it be bent back and maybe hammered a bit to restore shape? figure if nothing else I could just have the bent part replaced. thanks
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
12-17-2013, 08:12 PM | #2 |
Drives: '11 2SS/RS A6 Join Date: Apr 2011
Location: New Orleans
Posts: 504
|
It can't be bent back and hammered. The pipe is deformed (kinked). It may be worth $100 for just the j-pipes though. You could have them cut off and re-welded on your exhaust and, with a muffler delete - have essentially the same axle back.
__________________
Performance Mods:
Kooks 1-7/8 LTs; Calico coated w/HFCs, Solo Mach XL catback w/J-pipes, VMax TB, C.A.I. Intake, JRE Tune, RX Catch-Can |
12-17-2013, 08:36 PM | #3 |
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
the other one looks ok, so might just to have the other side pipe replaced with Jpipe rewelded to it, thanks for your imput
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
|
|
|
|