V6 with Borla Pro-X series mufflers!!! - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Wildpony61 · 01-20-2011, 12:34 AM

I spoke with a tech at Borla today, told him I had added BBK Long tube headers to my 2011 V6 Camaro, he didn't even know they made long tube headers for the V6....Anyways I was asking abuout the PRO XS series, its a universal fit muffler, you need to measure your stock and figure out location of the tubes before you order and you should run the 2" outlets...

mike.nite · 01-20-2011, 03:22 PM

I also have the BBK headers and used the Borla ProXS mufflers:

http://www.camaro5.com/forums/showthread.php?t=112386

PN: 40351 (2.25" in/out and offset/offset)

Sneeks20 · 01-20-2011, 11:57 PM

Whats better, borla cat back + x pipe or pro x street muffler? I really liked the op's video. Im trying to decide so i can find a dealer.

mike.nite · 01-21-2011, 05:38 PM

I don't think you'll need a resonated X with the borla ProXS mufflers unless you have lt headers. The borla ProXS mufflers are already medium muffled so no drone/rasp issues.

Cheapest way would be to custom fit only the ProXS mufflers. Otherwise I would go with the axleback. Check member digitalshow clip - just perfect IMO. I have the exact same setup but with BBK lt headers. So mine has more growl and is louder.

DevilKnightFalcon · 01-21-2011, 10:49 PM

If the rest of his system is the stock size then I believe these are the mufflers he is using because the stock system is 2.25" if I am not mistaken.

http://www.borla.com/products/produc...prod_sku=40357

Preditorian · 03-28-2011, 10:51 AM

Quote:

Originally Posted by mike.nite

I don't think you'll need a resonated X with the borla ProXS mufflers unless you have lt headers. The borla ProXS mufflers are already medium muffled so no drone/rasp issues.

Cheapest way would be to custom fit only the ProXS mufflers. Otherwise I would go with the axleback. Check member digitalshow clip - just perfect IMO. I have the exact same setup but with BBK lt headers. So mine has more growl and is louder.

Can you toss me the part numbers and additional information for your set up, Im interested in the mufflers but I have this little voice telling me to get headers for it too.

Would love to hear yours if at all possible.

mike.nite · 04-22-2011, 10:21 PM

Quote:

Originally Posted by Preditorian

Can you toss me the part numbers and additional information for your set up, Im interested in the mufflers but I have this little voice telling me to get headers for it too.

Would love to hear yours if at all possible.

Sorry for the late answer - haven't been on the site for a while. Here you can find my complete setup with soundfiles:

http://www.camaro5.com/forums/showth...orla+injen+bbk

Let me know if you have any other question.

01-21-2011, 10:49 PM	#47
DevilKnightFalcon Drives: 2010 Camaro 2LT/RS Join Date: Feb 2009 Location: Phoenix, AZ Posts: 1,406 View My Garage	If the rest of his system is the stock size then I believe these are the mufflers he is using because the stock system is 2.25" if I am not mistaken. http://www.borla.com/products/produc...prod_sku=40357 __________________ MBRP Catback/Magnaflow Resonated X/Airraid V2 CAI/Dash ABL/Interior LEDs/Custom Paint/Jet Coated American Racing LT Headers/High Flow cats/Trifecta Tune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
Stereo GUIDE ALL READ	WildBeast15	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	29	09-11-2010 01:14 AM
check this out -- Camaro Funny Car (NMCA Pro Street & NOPI series drag car)	1bad67camaro	Camaro Photos \| Spyshots \| Video \| Media Gallery	48	06-19-2009 10:51 AM

01-20-2011, 12:34 AM	#43
Wildpony61 Drives: 2011 Camaro LS Coupe Join Date: Oct 2010 Location: Las Cruces Posts: 2	I spoke with a tech at Borla today, told him I had added BBK Long tube headers to my 2011 V6 Camaro, he didn't even know they made long tube headers for the V6....Anyways I was asking abuout the PRO XS series, its a universal fit muffler, you need to measure your stock and figure out location of the tubes before you order and you should run the 2" outlets...

01-20-2011, 03:22 PM	#44
mike.nite Drives: 2011 2SS L99, 2010 LT RS Join Date: Mar 2010 Location: NY (USA) ZH (Switzerland) Posts: 437	I also have the BBK headers and used the Borla ProXS mufflers: http://www.camaro5.com/forums/showthread.php?t=112386 PN: 40351 (2.25" in/out and offset/offset)

01-20-2011, 11:57 PM	#45
Sneeks20 Account Suspended Drives: your woman wild... Join Date: Nov 2010 Location: SO CAL Posts: 751 View My Garage	Whats better, borla cat back + x pipe or pro x street muffler? I really liked the op's video. Im trying to decide so i can find a dealer.

01-21-2011, 05:38 PM	#46
mike.nite Drives: 2011 2SS L99, 2010 LT RS Join Date: Mar 2010 Location: NY (USA) ZH (Switzerland) Posts: 437	I don't think you'll need a resonated X with the borla ProXS mufflers unless you have lt headers. The borla ProXS mufflers are already medium muffled so no drone/rasp issues. Cheapest way would be to custom fit only the ProXS mufflers. Otherwise I would go with the axleback. Check member digitalshow clip - just perfect IMO. I have the exact same setup but with BBK lt headers. So mine has more growl and is louder.