Tire size for Hurst Performance wheels - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sgseward · 06-14-2011, 05:54 PM

We've been looking at replacing our stock wheels on the 2SS and after looking at just about everything, we're leaning toward the Hurst Performance wheels. These are at the top end of my price range and given that, I'd like to be able to move over the stock P-Zero's (the only have 3k on them) to keep the costs down.

The Hurst wheels are 20x10 vs 20x9 in the rear and 20x9 vs 20x8 in the front. So, the question is will the stock 245s/275s work on these rims? I realize that most tires fit a range, but I just wanted some input....and there's never a shortage of that here!

Steve

bob vogel · 06-14-2011, 05:59 PM

sell your tires. someone will by them on here.

Synner · 06-14-2011, 06:00 PM

Move the rear 275 to the front and buy a new tire for the rear.

blazzin1 · 06-14-2011, 07:25 PM

Yes, they will fit just fine. I have my 275's on 10" rears and my 245's on 8-1/2" fronts. BTW, I love those Hurst Wheels....wish I could afford them!!! You're car will look wicked!!!

subzero05 · 06-14-2011, 10:46 PM

that is actually not correct.. The REARS on the Hurst wheels are 20x11 for the Camaro only!

flht99b · 06-15-2011, 06:13 AM

I wish someone had the exact specs on the Hurst 20x9 and 20x11 wheels. The offsets I've seen reported especially for the rears are way too aggressive to fit 305 or 315 tires without hanging out past the fender. I find it hard to believe Hurst designed these wheels to fit stock tires as the 11" rear is way too wide for a 275 tire.
Ed M.

kook · 06-15-2011, 06:21 AM

I saw the Hurst booth at the Hot Rod Power Tour and both cars had 305 on the rear. They did stick out a bit to far for my liking and I'm guessing if you lower your car much you will have rubbing issues.

subzero05 · 06-15-2011, 09:32 AM

offset bolt pattern center bore

Camaro front 20" x 9" 32 mm 5 x 120 mm 70.6 mm
Camaro rear 20" x 11" 40 mm 5 x 120 mm 70.6 mm

ask as you shall receive!.. They will fit almost flush with the car lowered on an Eibach Coilover kit.. KENJI can give you additional details, pics etc and no they are not designed to fit stock tires, especially the rears

flht99b · 06-15-2011, 02:35 PM

Quote:

Originally Posted by subzero05

offset bolt pattern center bore

Camaro front 20" x 9" 32 mm 5 x 120 mm 70.6 mm
Camaro rear 20" x 11" 40 mm 5 x 120 mm 70.6 mm

ask as you shall receive!.. They will fit almost flush with the car lowered on an Eibach Coilover kit.. KENJI can give you additional details, pics etc and no they are not designed to fit stock tires, especially the rears

Unfortunately +40mm offset on the 20x11 is 5mm too little. You need +45mm or more offset on a 20x11 for a 305/35/20 or 315/35/20 tire to tuck inside the fender and for the tire not to hit the fender in a bump, especially a lowered car. The same issue with the BBS CH-R wheels exists, their 20x10.5 has a +34mm offset and it too needs 5mm or more positive offset to tuck the 305 or 315 tire under the fender well. Real shame as both the Hurst and BBS CH-R wheels are beautiful but not at the correct offset. Plus they are available and of impeccable quality.
Ed M.

Kenji · 06-16-2011, 10:19 AM

No problems with the Hurst wheels here. The car is lowered on Eibach coil-overs (about 1" to 1.5" in the rear at the moment and in the photos). The fenders were not modified and there are more than our fair share of bumps and potholes in the LA area. Never had any rubbing

. I'm running Michelin Pilot Sport PS2 Tires 305/35ZR20/XL on the rear (255/40ZR20/XL front) and don't think they look like they stick out too much... but judge for yourself:

autoguy · 06-23-2011, 12:19 AM

I have a set of these Hurst Wheels for my Camaro and they are 20 x 9 and 20 x 11. I will be running 275/40 front and 315/35 rears with a special surprise. I should have the tires in about two weeks. My Hurst Shifter came in today, and I have the Hurst Equipped Badge to go along with it and the wheels.

autoguy · 06-23-2011, 12:24 AM

Subzero, what is it I hear Hurst is getting a Festival Pace Car from indy? One of only four that had the LS3/6 Speed combo. I hear.

Toyaholic · 08-15-2011, 06:09 PM

Quote:

Originally Posted by autoguy

I have a set of these Hurst Wheels for my Camaro and they are 20 x 9 and 20 x 11. I will be running 275/40 front and 315/35 rears with a special surprise. I should have the tires in about two weeks. My Hurst Shifter came in today, and I have the Hurst Equipped Badge to go along with it and the wheels.

Well.... did the 315's work on the Hurst wheels? What offsets did you get?

autoguy · 08-15-2011, 10:03 PM

06-14-2011, 05:54 PM	#1
sgseward Drives: 2010 IOM 2SS Join Date: May 2010 Location: Manassas, Va Posts: 69 View My Garage	Tire size for Hurst Performance wheels We've been looking at replacing our stock wheels on the 2SS and after looking at just about everything, we're leaning toward the Hurst Performance wheels. These are at the top end of my price range and given that, I'd like to be able to move over the stock P-Zero's (the only have 3k on them) to keep the costs down. The Hurst wheels are 20x10 vs 20x9 in the rear and 20x9 vs 20x8 in the front. So, the question is will the stock 245s/275s work on these rims? I realize that most tires fit a range, but I just wanted some input....and there's never a shortage of that here! Steve Attached Images

06-15-2011, 06:13 AM	#6
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	I wish someone had the exact specs on the Hurst 20x9 and 20x11 wheels. The offsets I've seen reported especially for the rears are way too aggressive to fit 305 or 315 tires without hanging out past the fender. I find it hard to believe Hurst designed these wheels to fit stock tires as the 11" rear is way too wide for a 275 tire. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

06-15-2011, 06:21 AM	#7
kook Drives: 2010 2SS Yellow Join Date: May 2010 Location: Indiana Posts: 548 View My Garage	I saw the Hurst booth at the Hot Rod Power Tour and both cars had 305 on the rear. They did stick out a bit to far for my liking and I'm guessing if you lower your car much you will have rubbing issues. __________________ Edelbrock E-Force Stainless Works Lts Roto Fab CAI Magnaflow Street Cat-Back DOD Delete Forgestar F-14's and Pedders XA + PKG Custom grind cam from Cincy Speed ADM dual fuel pump ADM AF/Boost gauges FTI 3200 convertor Hurst shifter Cincy Speed Build and Tune 540rwhp

06-16-2011, 10:19 AM	#10
Kenji Drives: 2SS/RS M6 SW Join Date: Jan 2010 Location: SoCal Posts: 274 View My Garage	No problems with the Hurst wheels here. The car is lowered on Eibach coil-overs (about 1" to 1.5" in the rear at the moment and in the photos). The fenders were not modified and there are more than our fair share of bumps and potholes in the LA area. Never had any rubbing . I'm running Michelin Pilot Sport PS2 Tires 305/35ZR20/XL on the rear (255/40ZR20/XL front) and don't think they look like they stick out too much... but judge for yourself: __________________

08-15-2011, 10:03 PM	#14
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	Last edited by autoguy; 08-15-2011 at 10:17 PM.

06-14-2011, 05:59 PM	#2
bob vogel Drives: 2010 rs ss Join Date: Jan 2010 Location: calif Posts: 796	sell your tires. someone will by them on here.

06-14-2011, 06:00 PM	#3
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,544	Move the rear 275 to the front and buy a new tire for the rear.

06-14-2011, 07:25 PM	#4
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Yes, they will fit just fine. I have my 275's on 10" rears and my 245's on 8-1/2" fronts. BTW, I love those Hurst Wheels....wish I could afford them!!! You're car will look wicked!!!

06-14-2011, 10:46 PM	#5
subzero05 Account Suspended Drives: 2010 tbd Join Date: Mar 2009 Location: california Posts: 647	that is actually not correct.. The REARS on the Hurst wheels are 20x11 for the Camaro only!

06-15-2011, 09:32 AM	#8
subzero05 Account Suspended Drives: 2010 tbd Join Date: Mar 2009 Location: california Posts: 647	offset bolt pattern center bore Camaro front 20" x 9" 32 mm 5 x 120 mm 70.6 mm Camaro rear 20" x 11" 40 mm 5 x 120 mm 70.6 mm ask as you shall receive!.. They will fit almost flush with the car lowered on an Eibach Coilover kit.. KENJI can give you additional details, pics etc and no they are not designed to fit stock tires, especially the rears

06-23-2011, 12:19 AM	#11
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	I have a set of these Hurst Wheels for my Camaro and they are 20 x 9 and 20 x 11. I will be running 275/40 front and 315/35 rears with a special surprise. I should have the tires in about two weeks. My Hurst Shifter came in today, and I have the Hurst Equipped Badge to go along with it and the wheels.

06-23-2011, 12:24 AM	#12
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	Subzero, what is it I hear Hurst is getting a Festival Pace Car from indy? One of only four that had the LS3/6 Speed combo. I hear.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fikse Wheels the leader in custom fit wheels 6061-T-6 Aircraft Grade Billet Aluminum	Xplosive Performance	Wheels / Tires	8	07-09-2011 08:52 AM
Wheel and Tire optimization for lowered vehicles	PfadtRacing	Wheels and Tires Talk Sponsored by The Tire Rack	12	06-28-2011 11:31 AM
Tire Size for winter tire	homer2004	Wheels and Tires Talk Sponsored by The Tire Rack	12	11-09-2010 06:00 PM
Need some help in drag wheels size	jo0oker	Wheels and Tires Talk Sponsored by The Tire Rack	0	09-15-2010 12:12 PM
Tire chain/cable solution for the 20" wheels?	Jakefeb3	Wheels and Tires Talk Sponsored by The Tire Rack	17	12-16-2009 12:37 AM