07-25-2011, 11:31 PM | #1 |
New RJT Ported Throttle Body
Another color addition. Ported, Polished and Powder Coated Anodized Red. Man this thing is nice. Couldn't wait to get it installed. Got home from airport at 4:00 and had it installed by 5:30. Would have been sooner but had to take the tie and dress shirt off first...
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
07-25-2011, 11:42 PM | #2 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
how hard was it too install?
__________________
Email: rdurso1@yahoo.com |
07-25-2011, 11:48 PM | #3 |
Paul
|
Very nice!!! Looks great!
|
07-25-2011, 11:49 PM | #4 |
Four screws, one cable and the CAI is all. Easy to do. Lvl 1 job.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
07-26-2011, 08:32 AM | #5 |
Drives: '11 2SS/RS RJT M6 Join Date: Oct 2010
Location: Grounded in the 'Shwa
Posts: 478
|
Looks great! How does it match up with the uncleared strut towers? I'm between painting mine or polishing it.
__________________
Vararam CAI, Elite Engineering Catch Can, Separate Clutch Fluid Reservoir, Ghost Armor Full Protection Package, Chromed Turn Signal Bulbs, RPI Stealth Splash Guards, Skip Shift Eliminator, Defenderworx Chrome Bowtie Inserts, Pfadt Trailing Arms, Camaro Decal Store CGM Hood Spears with "376ci" custom text, Billet Depot/Drake Underhood Polished Caps, CGM Lug Nut Decals, Pedders Front Radius Rod Inserts, JacFab Front License Plate Bracket
|
07-26-2011, 08:37 AM | #6 |
Account Suspended
Drives: 99 Camaro SS, 79 z28, 70 GTX Join Date: Oct 2009
Location: ST Helens, OR
Posts: 1,759
|
|
07-26-2011, 09:10 AM | #7 |
Black Ice
Drives: 2SS/RS Black w/ silver ice stripes Join Date: Jul 2009
Location: Pueblo,Co.
Posts: 898
|
Very nice. I like it.
Where did you get the fuse box cover. I like it.
__________________
|
07-26-2011, 09:59 AM | #8 |
Nothing matches the shock towers. One of the worst things as far I'm concerned was GM not finishing the paiint in the engine compartment. Of course it is just a $37000 car. So I'm ok with it.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
07-26-2011, 10:16 AM | #9 |
Switchin' n Twitchin'
Drives: 2011 Camaro Join Date: Nov 2010
Location: Chula Vista, CA (Eastlake)
Posts: 3,145
|
Should've left on the shirt and tie and took pics of yourself working on the the car like that, just to show how easy it is! Looks good!
|
07-26-2011, 10:41 AM | #10 |
From one of the C5 sponsors. Unique Autodepot.com. Than had it anodized red when I got it.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
07-26-2011, 11:05 AM | #11 |
Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010
Location: SoCal
Posts: 692
|
Wowwww!!!! Thats looks amazing.
__________________
2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.
|
07-26-2011, 11:46 AM | #12 |
Drives: '11 2SS/RS RJT M6 Join Date: Oct 2010
Location: Grounded in the 'Shwa
Posts: 478
|
I agree with the look of the engine compartment. Think I'm going to hand polish the TB this summer but yours looks fantastic. Now I'm not sure.
__________________
Vararam CAI, Elite Engineering Catch Can, Separate Clutch Fluid Reservoir, Ghost Armor Full Protection Package, Chromed Turn Signal Bulbs, RPI Stealth Splash Guards, Skip Shift Eliminator, Defenderworx Chrome Bowtie Inserts, Pfadt Trailing Arms, Camaro Decal Store CGM Hood Spears with "376ci" custom text, Billet Depot/Drake Underhood Polished Caps, CGM Lug Nut Decals, Pedders Front Radius Rod Inserts, JacFab Front License Plate Bracket
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Those of you who have a Ported Throttle Body | CamaroFemme | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 88 | 06-15-2011 08:54 PM |
Ported throttle body.. | Pollock | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 3 | 05-17-2011 07:00 PM |
VMax CNC Throttle Body Dyno Test Data | Mike Norris | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 8 | 01-15-2011 08:28 AM |