SOLD - For Sale: Used ZL1 Spoiler - Factory Gloss Black

[Nick S]

SOLD!

Used ZL1 OEM Spoiler - Factory Gloss Black

Asking $225 Shipped. Can always make an offer and I'll consider it.

I have a used ZL1 spoiler from a Gloss Black ZL1 for sale. I got it with a used ZL1 Trunk lid that came off a wrecked car and I already had a new OEM Spoiler I bought a couple years ago. I have cleaned this spoiler up and it's in really good shape. No structural flaws or anything that I can find, just a few light surface scratches and water spots. A good buff job and I think it could look brand new.

I have already ordered new plastic retainers/inserts to go with this spoiler because one of the plastic retainers on the outside corner broke while removing it from the trunk lid. So I'm replacing all 4 plastic parts.

Thanks.

Nick S.

[olblue75]

PM sent

[Buschman]

Do the bolts match up to a RS trunk? If so I'm interested.

[Eddiefuzz]

Originally Posted by Buschman

Do the bolts match up to a RS trunk? If so I'm interes
ted.

The two outside holes on each side will match up, but you'll have three holes exposed under the third brake light under the spoiler. They are easy to plug up and the third brake light on the spoiler is REALLY sharp.. I have one and love it. It is so much larger too, really makes the rear end POP!!

[Nick S]

Originally Posted by Eddiefuzz

The two outside holes on each side will match up, but you'll have three holes exposed under the third brake light under the spoiler. They are easy to plug up and the third brake light on the spoiler is REALLY sharp.. I have one and love it. It is so much larger too, really makes the rear end POP!!

Thanks for answering this for me!

Eddie is correct. There would be three holes for your stock spoiler that would not be used under the center of the ZL1 spoiler. Otherwise the remaining studs would match up with the factory spoiler holes. I know that Rodger's Chevrolet sells plastic plugs that are painted to match factory colors for people who do this conversion.

You would also need to get a wiring harness from Gen5DIY to make the third brake light on the spoiler work.

Thanks.

Nick S.

[Eddiefuzz]

Originally Posted by Nick S

Thanks for answering this for me!

Eddie is correct. There would be three holes for your stock spoiler that would not be used under the center of the ZL1 spoiler. Otherwise the remaining studs would match up with the factory spoiler holes. I know that Rodger's Chevrolet sells plastic plugs that are painted to match factory colors for people who do this conversion.

You would also need to get a wiring harness from Gen5DIY to make the third brake light on the spoiler work.

Thanks.

Nick S.

You don't need the wiring harness. Speaker wire,small wire nuts and electric tape. Like wiring a ceiling fan. EASY PEASY...

[Nick S]

Originally Posted by Eddiefuzz

You don't need the wiring harness. Speaker wire,small wire nuts and electric tape. Like wiring a ceiling fan. EASY PEASY...

Yes I suppose this could be done as well but I'm sure that would involve cutting/splicing wires. For those that don't mind doing that it's certainly a solution. I prefer harnesses that plug and play so I don't have to cut any wires and it's easier to put back to stock later then.

Thanks for the suggestion on an alternate solution though Eddie!

Nick.

[Demonted]

I put one on my 2012 RS, i have 3 small plugs cuz i didnt want to pay for paint. The rest of the holes line up. Looks Awesome! BTW, that being said i have a Black RS Spoiler that needs a home too. Pics my ride before and after the ZL1 can be seen here: http://www.camaro5.com/forums/album.php?albumid=14781

[Nick S]

Originally Posted by Demonted

I put one on my 2012 RS, i have 3 small plugs cuz i didnt want to pay for paint. The rest of the holes line up. Looks Awesome! BTW, that being said i have a Black RS Spoiler that needs a home too. Pics my ride before and after the ZL1 can be seen here: http://www.camaro5.com/forums/album.php?albumid=14781

Your car looks great with the ZL1 spoiler! Thanks for sharing the pics!

[trttr11]

Still have it ??

[Nick S]

Originally Posted by trttr11

Still have it ??

Yes it's still available.

Thanks.

[trttr11]

PM sent

[Nick S]

SOLD!