Quad tips for MRT 2 question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Abomb1223 · 06-01-2015, 06:43 AM

So my MRT 2 has been on for a while now, just ordered and revieved the tips, put on the quad tip diffuser and realized these things are going to need some major work to be aligned with the diffuser.. How much is this going to cost me??

hzisfrom1994 · 06-01-2015, 08:26 AM

It costs me $120, the muffler guy just cut the axle back again, pushed it a little bit more "in" and then it will aligned.

Abomb1223 · 06-01-2015, 09:33 AM

You have the mrt2?

AllBlackSS · 06-01-2015, 09:50 AM

I don't have the mrt2 but it cost me $120 also. My muffler guy had to weld the quad tips on and re-do the geometry of the pipe to fit into the NPP diffuser.

Homeless Man · 06-01-2015, 10:34 AM

It's worth it.

Abomb1223 · 06-01-2015, 11:21 AM

I think they have to do a lot of new geometry to make this work but I'm taking it around to different places today

hzisfrom1994 · 06-01-2015, 02:08 PM

I have MRT V1, but should be very similar. Many members have the same setup as yours done.

Ventmaster · 06-01-2015, 02:14 PM

OK- I've got to post here one more time... Why doesn't MRT or some other manufacturer offer a quad tip axle back exhaust with a NPP diffuser as a kit that's ready to bolt on and go?

Seriously guys- you'd sell plenty. Am I right folks?

hzisfrom1994 · 06-01-2015, 02:59 PM

Quote:

Originally Posted by Ventmaster

OK- I've got to post here one more time... Why doesn't MRT or some other manufacturer offer a quad tip axle back exhaust with a NPP diffuser as a kit that's ready to bolt on and go?

Seriously guys- you'd sell plenty. Am I right folks?

Cuz it is going to be a pain in the ass to ship a diffuser.

Homeless Man · 06-01-2015, 04:57 PM

They do but for V8's. They call it the ZL1 versions lol

Abomb1223 · 06-01-2015, 07:04 PM

I got quoted 200.. Everyone said it's a lot of work to make these centered

bluebonn · 06-01-2015, 07:16 PM

It cost me $220 and they where a pain to get aligned correctly I had to take it back twice and still I don't think they are perfect just yet

I have the MRT version 2 as well with 4" tips
This pic is before I took it back to get them re aligned they are going to have to cut the tips off then cut the pipes to get them to work. About 2 to 3 hours worth of work so $200 would be reasonable because of all the welds and required work

hzisfrom1994 · 06-01-2015, 07:41 PM

I'd say you muffler shop arent experienced at all.

bluebonn · 06-01-2015, 07:56 PM

Quote:

Originally Posted by hzisfrom1994

I'd say you muffler shop arent experienced at all.

Yea I figured that out afterwards but all is well now

06-01-2015, 06:43 AM	#1
Abomb1223 Drives: 2011 Camaro Join Date: Apr 2012 Location: Ohio Posts: 1,086	Quad tips for MRT 2 question So my MRT 2 has been on for a while now, just ordered and revieved the tips, put on the quad tip diffuser and realized these things are going to need some major work to be aligned with the diffuser.. How much is this going to cost me??

06-01-2015, 07:16 PM	#12
bluebonn Texas Drives: 2015 2SS Red Hot LS3 Join Date: Jan 2015 Location: Georgia Posts: 308 View My Garage	It cost me $220 and they where a pain to get aligned correctly I had to take it back twice and still I don't think they are perfect just yet I have the MRT version 2 as well with 4" tips This pic is before I took it back to get them re aligned they are going to have to cut the tips off then cut the pipes to get them to work. About 2 to 3 hours worth of work so $200 would be reasonable because of all the welds and required work Attached Images __________________ My Youtube channel https://www.youtube.com/channel/UCi5...3pUE7XWDoWMgdA

06-01-2015, 08:26 AM	#2
hzisfrom1994 ZYJ Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014 Location: Miami, FL Posts: 1,346	It costs me $120, the muffler guy just cut the axle back again, pushed it a little bit more "in" and then it will aligned.

06-01-2015, 09:33 AM	#3
Abomb1223 Drives: 2011 Camaro Join Date: Apr 2012 Location: Ohio Posts: 1,086	You have the mrt2?

06-01-2015, 09:50 AM	#4
AllBlackSS Drives: 2010 SS Join Date: May 2014 Location: Maryland Posts: 418	I don't have the mrt2 but it cost me $120 also. My muffler guy had to weld the quad tips on and re-do the geometry of the pipe to fit into the NPP diffuser.

06-01-2015, 10:34 AM	#5
Homeless Man Homeless Life Chose Me Drives: LS3 (sold 4/21) Join Date: Nov 2014 Location: Streets of Philly Posts: 3,650	It's worth it.

06-01-2015, 11:21 AM	#6
Abomb1223 Drives: 2011 Camaro Join Date: Apr 2012 Location: Ohio Posts: 1,086	I think they have to do a lot of new geometry to make this work but I'm taking it around to different places today

06-01-2015, 02:08 PM	#7
hzisfrom1994 ZYJ Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014 Location: Miami, FL Posts: 1,346	I have MRT V1, but should be very similar. Many members have the same setup as yours done.

06-01-2015, 02:14 PM	#8
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 2,869	OK- I've got to post here one more time... Why doesn't MRT or some other manufacturer offer a quad tip axle back exhaust with a NPP diffuser as a kit that's ready to bolt on and go? Seriously guys- you'd sell plenty. Am I right folks?

06-01-2015, 04:57 PM	#10
Homeless Man Homeless Life Chose Me Drives: LS3 (sold 4/21) Join Date: Nov 2014 Location: Streets of Philly Posts: 3,650	They do but for V8's. They call it the ZL1 versions lol

06-01-2015, 07:04 PM	#11
Abomb1223 Drives: 2011 Camaro Join Date: Apr 2012 Location: Ohio Posts: 1,086	I got quoted 200.. Everyone said it's a lot of work to make these centered

06-01-2015, 07:41 PM	#13
hzisfrom1994 ZYJ Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014 Location: Miami, FL Posts: 1,346	I'd say you muffler shop arent experienced at all.