SNL Performance Cam Install Special! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BullF-16 · 08-15-2011, 07:26 PM

Chris/Steve, I spoke with you guys today about the ARh long tubes with no cats. Also discussed the cam install....didnt know for sure about the cam at the time. WTF, lets do it. Looking at your 231/236 cam with under drive pulley. The question is can this be done in a day if i get it there before you open. I am just curious as to what the SAE numbers will be approx. with the CAI intake, SW retro 3" catback, ARH LT no cats and your SNL cam with tune. I know, the gains before and after are whats really important, but I am hoping for about 460 or so with good drive-ability.

Thanks

steeleshark2 · 08-15-2011, 07:52 PM

Quote:

Originally Posted by BullF-16

Chris/Steve, I spoke with you guys today about the ARh long tubes with no cats. Also discussed the cam install....didnt know for sure about the cam at the time. WTF, lets do it. Looking at your 231/236 cam with under drive pulley. The question is can this be done in a day if i get it there before you open. I am just curious as to what the SAE numbers will be approx. with the CAI intake, SW retro 3" catback, ARH LT no cats and your SNL cam with tune. I know, the gains before and after are whats really important, but I am hoping for about 460 or so with good drive-ability.

Thanks

Could not help myself for jumping in. You can look at my mods in the sig as well as what I pulled. With the mods that you selected, you should be more. I have seen some up to 475rwhp with your setup. It's different from car to car dyno to dyno. HOWEVER, I think you will be very happy with the 231/236. It will meet and/or exceed expectations. Now, I have seen Chris/Steve all over these boards and know of several people that has gotten work done by SNL. Not a single complaint from anybody. You will be in good hands!!

BullF-16 · 08-15-2011, 08:09 PM

Quote:

Originally Posted by steeleshark2

Could not help myself for jumping in. You can look at my mods in the sig as well as what I pulled. With the mods that you selected, you should be more. I have seen some up to 475rwhp with your setup. It's different from car to car dyno to dyno. HOWEVER, I think you will be very happy with the 231/236. It will meet and/or exceed expectations. Now, I have seen Chris/Steve all over these boards and know of several people that has gotten work done by SNL. Not a single complaint from anybody. You will be in good hands!!

Huge thanks for this. It will be tuned on a Dynocom and will probably be upwards of 110 degrees so I dont know what to expect. The car is 2 weeks old and will have about 600 miles on it after i drive it down to Ft Worth. So much for the 5 year warranty....oh well

gatorlover · 08-15-2011, 08:31 PM

Can I get a pm with pricing and recommendations on a cam for a daily driver on a L99? Something with good street manners and a nice lope. I currently have Long tubes(1 7/8) cai and borla catback. Thanks.

Chris@SPMC · 08-16-2011, 03:12 PM

Quote:

Originally Posted by gatorlover

Can I get a pm with pricing and recommendations on a cam for a daily driver on a L99? Something with good street manners and a nice lope. I currently have Long tubes(1 7/8) cai and borla catback. Thanks.

PM sent

RGV2SSRS · 08-18-2011, 04:41 PM

can u pm me a price for this cam kit and install. thanks

Chris@SPMC · 08-19-2011, 01:26 PM

Quote:

Originally Posted by RGV2SSRS

can u pm me a price for this cam kit and install. thanks

PM sent

crzefuz · 01-23-2012, 03:34 PM

Can you please pm pricing.....thanks

robb1320 · 05-14-2014, 05:33 AM

These guys screwed up my car! I went in for a simple cam install. I came away with a blown motor! They over looked a vital component! They wanted to push the blame on the manufacturer stating the car made too much power. Will if you knew it made this much power why didn't you replace the vital parts! I know a cam only doesn't put me amongst the highest horsepower in t he world! Hmmm, I wonder what everyone else is doing to avoid destruction, I bet the other shops are replacing those vital parts! When the price for a cam seems to low, you might want to ask yourself ! I WONDER WHAT SHORT CUTS THEY'RE TAKING! A 100.00 part they neglected to change cost thousands of dollars of damage!! Becareful where you go!

08-15-2011, 08:31 PM	#18
gatorlover Drives: 2013 AGM 1SS/RS 1LE Join Date: Jul 2010 Location: jacksonville Posts: 248	Can I get a pm with pricing and recommendations on a cam for a daily driver on a L99? Something with good street manners and a nice lope. I currently have Long tubes(1 7/8) cai and borla catback. Thanks. __________________ 2013 Ashen Grey Metallic 1SS/1LE, NPP, Camera (1 of 43 produced)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official SYNERGY GREEN Camaro Thread	Tran	Camaro Photos \| Spyshots \| Video \| Media Gallery	4499	11-30-2023 08:10 AM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
SNL Performance Cam Install Special	Matt@SNLPerformance	USA - Texas	1	02-07-2011 09:25 AM
4th Annual GM Performance Parts LSX Shootout!!	nmcajeff	Dragstrip and Launch Techniques Discussion	3	07-30-2010 12:05 PM

08-15-2011, 07:26 PM	#15
BullF-16 USAF retired! Thank God! Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011 Location: North Texas Posts: 2,799	Chris/Steve, I spoke with you guys today about the ARh long tubes with no cats. Also discussed the cam install....didnt know for sure about the cam at the time. WTF, lets do it. Looking at your 231/236 cam with under drive pulley. The question is can this be done in a day if i get it there before you open. I am just curious as to what the SAE numbers will be approx. with the CAI intake, SW retro 3" catback, ARH LT no cats and your SNL cam with tune. I know, the gains before and after are whats really important, but I am hoping for about 460 or so with good drive-ability. Thanks

08-18-2011, 04:41 PM	#20
RGV2SSRS Drives: 2010 CAMARO 2SS/RS Join Date: Jun 2010 Location: RGV TEXAS Posts: 371	can u pm me a price for this cam kit and install. thanks

01-23-2012, 03:34 PM	#22
crzefuz Drives: 2010 Camaro SS Join Date: Jul 2010 Location: Los Angeles Posts: 4	Can you please pm pricing.....thanks

05-14-2014, 05:33 AM	#23
robb1320 Drives: 1970 Camaro RS/1998 C5 Join Date: Apr 2014 Location: United States Posts: 1	These guys screwed up my car! I went in for a simple cam install. I came away with a blown motor! They over looked a vital component! They wanted to push the blame on the manufacturer stating the car made too much power. Will if you knew it made this much power why didn't you replace the vital parts! I know a cam only doesn't put me amongst the highest horsepower in t he world! Hmmm, I wonder what everyone else is doing to avoid destruction, I bet the other shops are replacing those vital parts! When the price for a cam seems to low, you might want to ask yourself ! I WONDER WHAT SHORT CUTS THEY'RE TAKING! A 100.00 part they neglected to change cost thousands of dollars of damage!! Becareful where you go!