07-28-2014, 05:53 AM | #1 |
Jason
Drives: 2011 2SS/RS M6 Join Date: Apr 2011
Location: Richmond, Va
Posts: 341
|
Paintless dent repair
Has anyone had any luck with paintless dent repair in or around Richmond/Midlothian, VA? A car of teenagers shot at my truck yesterday with a bee bee gun and left a nice little dent in my driver's door.
__________________
Kook's headers w/ high flow cats, Borla S-Type, VMAX ported throttle body, CAI Inc. intake, Jannetty race scoop, Roto-Fab washer bottle relocation, Jannetty rough idle blower cam, DSS 9" w/ 3.70 gears, RPM Level 6 trans, Street Slayer Twin Carbon clutch, MGW Shifter, Pfadt trailing arms.
|
07-30-2014, 01:28 PM | #2 |
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Granted im out of your range... if you have dent wizzard down there..they are mobile and do a good job. We use them here at work and as long as the dent is a pdr and not a dent/paint damage or close to the dge..its worth a try.
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
07-30-2014, 02:02 PM | #3 |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
a dent form a BB probably won't come out....depends how deep the core of the dent is. A lot of BB dents are extremely deep..
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
07-30-2014, 09:16 PM | #4 |
Jason
Drives: 2011 2SS/RS M6 Join Date: Apr 2011
Location: Richmond, Va
Posts: 341
|
That's pretty much what the dent wizard guy told me today. It's between a quarter and half inch deep, but he said he probably won't be able to fix it because the metal has stretched too much.
__________________
Kook's headers w/ high flow cats, Borla S-Type, VMAX ported throttle body, CAI Inc. intake, Jannetty race scoop, Roto-Fab washer bottle relocation, Jannetty rough idle blower cam, DSS 9" w/ 3.70 gears, RPM Level 6 trans, Street Slayer Twin Carbon clutch, MGW Shifter, Pfadt trailing arms.
|
|
|