11-18-2014, 12:59 PM | #1 |
Drives: 2017 ZL1 Join Date: Sep 2014
Location: Gallatin, TN
Posts: 21
|
Engine Builder / Tuner near Nashville?
Hey guys, I have read through a ton of these posts and it looks like my ZL1 can pretty easily be upgraded to some pretty sizeable HP gains. My problem is time, I don't have any...are there any shops near the Nashville area that does these same type of LSA engine upgrades? I can't see me going to Utah or Connecticut to get this done...and I'm not comfortable installing these type parts on the car myself.
I did get a nice quote from PCM in North Carolina, just looking to see if there might be any others... Any help would be appreciated... |
11-18-2014, 05:02 PM | #2 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
What are you wanting to add. I'm in Hendersonville. I could help you if you want to DIY. Or Jerry Onyx at the Performance Garage in Smyrna does plenty of LS powered cars.
__________________
Bryan 2018 ZL1 M6
|
11-19-2014, 07:36 AM | #3 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
BTW We are going to a dyno day in Lebanon this Sat. if you want to get a baseline on your car. PM me if you want details.
__________________
Bryan 2018 ZL1 M6
|
11-19-2014, 03:21 PM | #4 |
Drives: 2017 ZL1 Join Date: Sep 2014
Location: Gallatin, TN
Posts: 21
|
Ok, Thanks for the info. I was looking at doing headers, injectors, cam, valves / springs, pulley, etc. I guess what some would call the "normal" upgrades to get into the 600-650RWHP range, higher if my wallet can stand it...
|
11-19-2014, 08:08 PM | #5 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
We will all probably meet at the Thorton's on Long Hollow @ Belvedere Sat. morning around 8 A.M. and drive together.
This is the place https://www.google.com/maps/place/17...0de500c2cb3d0b
__________________
Bryan 2018 ZL1 M6
|
11-19-2014, 10:35 PM | #6 |
Music City Camaro Club
Drives: 2014 2SS/RS Spring Special Edition Join Date: May 2014
Location: Christiana, TN
Posts: 642
|
Steve did my header and exhaust install and tune. I will be there around 9-9:30ish.
__________________
EMC(SS) USN RET. 2014 2SS Spring Special Edition,1 of 293. Cold Air Inc. CAI,Apex Catch Can, Kooks 1-7/8" headers, Kooks HF Cats, X-pipe, Kooks mufflers,Graphite, BMR Toe links, BMR rear trailing arms, MRR228s,RGB ORACLE Colorshift Halos, RGB LED Engine bay and Grille lighting, Diode Dynamics RGB Fog Lights. NightOwl LED control system. Painted engine cover by S.L. Customs. River Cities Creations painted strut brace. My Build Thread
|
11-20-2014, 12:11 AM | #7 |
Drives: LSx Performance Specialist Join Date: Jul 2011
Location: Lafayette, LA
Posts: 517
|
ZL1 Danny,
I'm not sure how far you are willing to go. We are about 8 hours away from you. We get cars in from all over the US. Give us a call or email and we can get a quote over to you. We would like to make that ZL1 a little faster for you. |
11-26-2014, 11:05 AM | #8 |
Snake Eater
Drives: 2012 AGM ZL1 Join Date: Oct 2011
Location: TN
Posts: 2,737
|
Only if this was on the 13th j would be able to make this. Sigh haha
Sent from Wayne's Manor
__________________
Build Thread: http://www.camaro5.com/forums/showth...95#post8351295
Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/ |
|
|
|
|